Q: What are the technical specifications of the KENWOOD KRF-V5030D amplifier?

Output power: The KENWOOD KRF-V5030D delivers 80 watts per channel (80 W + 80 W) in stereo mode according to DIN standards (1 kHz, 0.7% THD, 4 ohms). In surround mode, it provides 80 W + 80 W for the front channels, 80 W for the center channel, and 80 W + 80 W for the surround channels. Multichannel configuration: This audio/video amplifier is equipped with 5 independent channels (5.1 configuration) allowing for complete surround reproduction. It supports Dolby Digital (AC-3) and PCM digital formats for optimal audio quality. Frequency response and sound quality: The frequency response ranges from 13 Hz to 53 kHz (+0 dB, ±3.0 dB), covering the entire audio spectrum. The signal-to-noise ratio reaches 91 dB for CD inputs and 75 dB for MM phono inputs, ensuring clear sound without noticeable background noise. Inputs and outputs: The receiver features RCA analog audio inputs, optical and coaxial digital inputs for CD, DVD, and video sources. Outputs include connections for speakers (front, center, surround), a pre-amplified output for a subwoofer (2 V / 2.2 kΩ), as well as cassette recording outputs. FM/AM tuner and controls: The FM tuner covers the range from 87.5 to 108 MHz with a sensitivity of 1.2 µV in mono. Tone controls offer an adjustment of ±10 dB for bass (at 100 Hz) and treble (at 10 kHz), allowing you to customize sound reproduction according to your preferences. General characteristics: Dimensions 440 mm (width) × 143 mm (height) × 400 mm (depth). Weight 8.9 kg. Power consumption 220 W. Compatible with Dolby Digital and DTS audio formats (for certain models), the KRF-V5030D is a versatile receiver suitable for home theater and multichannel audio installations.

Question 1

What are the technical specifications of the KENWOOD KRF-V5030D amplifier?

Accepted Answer

Output power: The KENWOOD KRF-V5030D delivers 80 watts per channel (80 W + 80 W) in stereo mode according to DIN standards (1 kHz, 0.7% THD, 4 ohms). In surround mode, it provides 80 W + 80 W for the front channels, 80 W for the center channel, and 80 W + 80 W for the surround channels.

Multichannel configuration: This audio/video amplifier is equipped with 5 independent channels (5.1 configuration) allowing for complete surround reproduction. It supports Dolby Digital (AC-3) and PCM digital formats for optimal audio quality.

Frequency response and sound quality: The frequency response ranges from 13 Hz to 53 kHz (+0 dB, ±3.0 dB), covering the entire audio spectrum. The signal-to-noise ratio reaches 91 dB for CD inputs and 75 dB for MM phono inputs, ensuring clear sound without noticeable background noise.

Inputs and outputs: The receiver features RCA analog audio inputs, optical and coaxial digital inputs for CD, DVD, and video sources. Outputs include connections for speakers (front, center, surround), a pre-amplified output for a subwoofer (2 V / 2.2 kΩ), as well as cassette recording outputs.

FM/AM tuner and controls: The FM tuner covers the range from 87.5 to 108 MHz with a sensitivity of 1.2 µV in mono. Tone controls offer an adjustment of ±10 dB for bass (at 100 Hz) and treble (at 10 kHz), allowing you to customize sound reproduction according to your preferences.

General characteristics: Dimensions 440 mm (width) × 143 mm (height) × 400 mm (depth). Weight 8.9 kg. Power consumption 220 W. Compatible with Dolby Digital and DTS audio formats (for certain models), the KRF-V5030D is a versatile receiver suitable for home theater and multichannel audio installations.

Question 2

How to resolve the issue when the remote control of the KENWOOD KRF-V4550D receiver is not working?

Accepted Answer

If the remote control of your KENWOOD KRF-V4550D audio-video receiver is not working, start by checking the battery status. Open the battery compartment located at the back of the remote control and replace the two AA (R6) batteries with new ones, strictly following the polarity indicated on the internal diagram of the compartment. Note that the batteries originally supplied with the product may have a shorter lifespan due to factory checks.

Next, check the operating environment of the remote control. The operating range is about 6 meters with an infrared system. Make sure you are at a sufficient distance from the receiver and that no obstacles are blocking the infrared signal between the remote control and the infrared sensor of the receiver. Important: do not install the infrared sensor in direct sunlight or under the direct light of a high-frequency fluorescent lamp, as this may cause malfunction. Change the location of the receiver if necessary to avoid this issue.

Clean the remote control by wiping the front with a soft, dry cloth to remove dust and dirt. Ensure that the buttons are not stuck or dirty, and check that you are pressing the buttons with an interval of at least 1 second between each successive press.

Check that the KENWOOD KRF-V4550D receiver is powered on and in standby mode (the standby indicator should be lit). For the remote control to work, the receiver must be in standby position. First, test by pressing the POWER button on the remote control to turn on the device. If this does not work, try resetting the receiver's microprocessor: hold down the ON/STANDBY button on the front panel, then press POWER. This operation requires the power cord to be plugged in. The reset will erase memory settings and restore factory settings.

If after these checks the remote control still does not work, the problem may be hardware-related. Check if there is another compatible remote control to determine if the issue is with the remote control itself or the infrared sensor of the receiver. As a last resort, contact KENWOOD customer service or a professional for assistance or replacement of the remote control.

User manual KENWOOD AV receiver : user manuals and guides in PDF

Models KENWOOD AV receiver most viewed

Other categories KENWOOD

Recent questions about AV receiver KENWOOD