Q: What is the release year of the Sony KD49XE8096BAEP television?

The Sony KD49XE8096BAEP television was released in 2017 . This model is part of the BRAVIA XE80 range, Sony's premium line from that period. At its launch, it represented the latest technological advancements from Sony in terms of 4K picture quality, featuring advanced image processors like 4K X-Reality PRO and Triluminos display. The KD-49XE8096BAEP is equipped with the Android TV 6.0 operating system, with the option to upgrade to Android Oreo 8.0. This 49-inch television offered an excellent performance-to-price ratio at the time, combining 4K resolution (3,840 x 2,160 pixels), Edge-LED technology, and complete smart connectivity via WiFi and Bluetooth.

Question 1

How to remove or install the clip-on feet of the SONY Bravia KD75X85KP television without screws?

Accepted Answer

The SONY Bravia KD75X85KP television uses a clip-on foot attachment system, without screws. Here’s how to remove or install these feet:

Removing the clip-on feet

Prepare the television: Gently lay it on a soft, flat surface, screen facing down to avoid scratches.
Locate the clips: On the base of the feet, find the small tabs or pressure points that hold the foot in place.
Press and unclip: Using your fingers, press on the clips or tabs while gently pulling the foot outward to release it.
Repeat the process: Do the same for the other foot.

Installing the clip-on feet

Position the foot: Align it with the designated spots under the television.
Clip it in place: Press firmly until you hear or feel a click indicating that the foot is securely attached.
Check stability: Ensure that the feet are firmly attached before returning the television to an upright position.

This screwless system makes it easy to assemble and disassemble the feet while ensuring a stable and secure attachment.

Question 2

How to reset or restart the Sony KLV-17HR2 television?

Accepted Answer

To reset or restart your Sony KLV-17HR2 television, you can follow these simple steps:

Turn off the television using the power button on the remote control or directly on the television.
Unplug the power cable from the electrical outlet to completely cut off the power.
Wait about 1 to 2 minutes to allow the device to fully discharge.
Plug the power cable back into the electrical outlet.
Turn on the television by pressing the power button.

This procedure will restart the television and may resolve some temporary issues related to the device's operation.

Question 3

Where can I find the 'Crestron Connected' section in the SONY Bravia XBR55X950H TV manual?

Accepted Answer

The 'Crestron Connected' section in the SONY Bravia XBR55X950H TV manual is usually found in the chapters dedicated to network connectivity or integration with home automation systems.

Here’s how to locate this information:

Check the table of contents for sections such as 'Network', 'Remote Control', 'Home Automation Integration', or 'Advanced Features'.
Look for a section titled 'Crestron Connected' or similar terms that explain how to connect and configure the TV with a Crestron system.
This section often details:
- The network requirements for Crestron connection.
- The settings to configure in the TV menu.
- The supported protocols for remote control.

If you want to integrate your TV into a Crestron home automation system, also ensure that your TV's firmware is up to date, as some features may depend on software updates.

Question 4

Where is the inverter board located on the Sony Bravia KD50X81K television?

Accepted Answer

The Sony Bravia KD50X81K television does not use an inverter board, as this type of component is generally associated with LCD screens backlit by fluorescent tubes (CCFL), where the inverter board converts the current to power the backlighting.

This Sony model likely uses LED backlighting, which does not require an inverter board. Instead, the power for the LEDs is managed by a specific power supply board integrated into the television.

If you are looking to locate a particular component or diagnose a backlighting issue, it is advisable to check the power supply board or the LED connectors. However, opening the television should be done carefully and by a professional to avoid any damage or electrical risk.

Question 5

What is the release year of the Sony KD49XE8096BAEP television?

Accepted Answer

The Sony KD49XE8096BAEP television was released in 2017. This model is part of the BRAVIA XE80 range, Sony's premium line from that period. At its launch, it represented the latest technological advancements from Sony in terms of 4K picture quality, featuring advanced image processors like 4K X-Reality PRO and Triluminos display.

The KD-49XE8096BAEP is equipped with the Android TV 6.0 operating system, with the option to upgrade to Android Oreo 8.0. This 49-inch television offered an excellent performance-to-price ratio at the time, combining 4K resolution (3,840 x 2,160 pixels), Edge-LED technology, and complete smart connectivity via WiFi and Bluetooth.

Question 6

What to do if the image is frozen on certain channels of the Sony KD55X85K television?

Accepted Answer

If the image on your Sony KD55X85K television is frozen on certain channels, here are several steps to follow to try to resolve this issue:

1. Restart the television

Turn off your television, unplug it from the power outlet for about a minute, then plug it back in and turn it on. This often helps to temporarily reset functions and resolve image freezes.

2. Check the connections

Make sure all cables (antenna, HDMI, etc.) are properly connected and in good condition.
A poorly connected or defective cable can cause display issues on certain channels.

3. Test other channels

Change the channel to check if the problem only affects certain channels or if it is widespread. If only two channels are affected, the issue may be with the signal from those specific channels.

4. Update the television software

Check in the settings if a firmware update is available. An outdated version can lead to display malfunctions.

5. Reset to factory settings

If none of the previous solutions work, you can perform a factory reset. This will reset all television configurations, so make sure to save your preferences if possible.

If the problem persists after these steps, it may be a more complex technical issue requiring professional assistance.

Question 7

What should I do if my Sony Bravia KD49XF9005 television does not turn on and remains unresponsive?

Accepted Answer

If your Sony Bravia KD49XF9005 television does not turn on and remains completely inactive, here are several steps to follow to try to resolve this issue:

1. Check the power supply

Make sure the power cable is properly connected to both the television and a functional wall outlet.
Try plugging the television into another outlet to eliminate a problem related to the power source.

2. Check the power supply unit (if applicable)

If your model uses an external power supply unit, check for a light indicator on this unit. The absence of light may indicate a power fault.

3. Perform a power reset

Unplug the television from the electrical outlet.
Wait about 60 seconds to allow the device to reset.
Plug the television back in and try to turn it on again.

4. Test the remote control and power button

Check that the batteries in the remote control are in good condition and properly inserted.
Try turning on the television using the power button located directly on the device.

5. Observe the indicators or error messages

Note any blinking lights or messages displayed on the television, as this may help diagnose the problem.

If after these checks your television remains inactive, it is possible that a hardware issue requires technical intervention.

Question 8

Does the power supply of the Sony Bravia KD49XF9005 television have a small LED indicator?

Accepted Answer

Yes, the power supply (power brick) of the Sony Bravia KD49XF9005 television is generally equipped with a small LED indicator.

This light indicator serves to show the power status:

Light on: the power brick is receiving electrical current properly and is functioning normally.
Light off: the power brick is not receiving power or may be malfunctioning.

This indicator allows for a quick check to see if the power supply is powered on, which can be useful for diagnosing certain power-related issues with the television.

Question 9

How to mount the Sony KD49XH8096 TV on the wall?

Accepted Answer

The Sony KD-49XH8096 weighs 11.6 kg without the stand (or 12.1 kg with the stand), making wall mounting quite feasible. The TV is equipped with a wall mounting plate provided at the back, compatible with M6 screws of a length of 8 to 12 mm. For complete wall mounting, Sony recommends using optional wall brackets such as the SU-WL450 or SU-WL850 depending on your needs.

Before proceeding with wall mounting, you must first remove the stand by unscrewing the mounting plate on which it rests. Be sure to use a flat-head screwdriver for this operation, as any other tool may over-tighten and damage the TV. The order of the steps is important: prepare the TV by removing its stand, then attach the wall mounting accessory to the back of the TV before making the cable connections.

For tightening the wall mounting screws on the TV, adhere to a precise torque of 1.5 N·m (equivalent to 15 kgf·cm). If you are using a power screwdriver, set the torque to this value to avoid any internal damage to the TV. Only use the screws provided with the chosen wall mount, as unsuitable screws could cause internal damage or make the TV fall.

Sony strongly recommends entrusting the wall installation to a specialized technician or an authorized dealer. This expertise is necessary to determine the wall's resistance to the weight of the TV and ensure a secure installation. Improper handling or incorrect installation would not be covered by the Sony warranty. The screws needed to fix the wall mount to the wall are not provided with the TV: they depend on the type of wall (concrete, brick, plaster) and should be chosen accordingly.

After installation, regularly check that the wall mount and the TV remain securely attached. Make the electrical and audiovisual connections once the TV is hung and properly secured on the mount to avoid any damage to the cables and the product.

Question 10

Why doesn't my SONY KD-65X9005 TV detect the update data?

Accepted Answer

If your SONY KD-65X9005 TV does not detect the update data, several causes may explain this problem. The most common reasons are insufficient Internet connection, lack of internal storage space, or temporary unavailability of Sony's update servers. Here’s how to resolve this situation step by step.

Check the Internet connection: The first step is to ensure that your TV is properly connected to the network. Test the connection by opening an online app (YouTube, Netflix, browser) to confirm Internet access. If the connection fails, check your Wi-Fi network or Ethernet connection settings, then restart your router. To perform a detailed network diagnosis, go to the Settings menu and check that your IP address, gateway, and DNS are correctly configured.

Restart the TV: A complete restart can resolve temporary issues. Turn off the TV, unplug it from the power outlet for at least 2 to 3 minutes, then plug it back in and turn it on. This operation clears the cache and may allow the TV to redetect the update servers.

Free up storage space: If the update cannot be detected, it may be because the internal storage space is insufficient. Delete applications or downloaded content that you no longer use. Go to Settings, then Application Management to uninstall unnecessary apps and free up space for the update.

Start a manual update search: Press the HOME button on the TV, select the help icon (Help), then go to Assistance or Customer Support > Software Update. The TV will then automatically search for available updates on Sony's servers. Allow the process to complete fully, even if it takes a few minutes.

Update via USB if detection fails: If your TV still does not detect updates online, you can manually update via USB. Visit the official Sony website, download the update file for the KD-65X9005 model, copy it to a USB drive formatted in FAT32, insert it into the TV's USB port, and follow the on-screen instructions. This method works independently of the Internet connection.

Check the availability of Sony servers: It is possible that Sony's update servers are temporarily unavailable or under maintenance. If you have followed all the steps above without success, wait a few hours and try again. You can also check the official Sony website or contact Sony customer support to verify if an update is actually available for your KD-65X9005 model at that time.

User manual SONY TV : user manuals and guides in PDF

Models SONY TV most viewed

Other categories SONY

Recent questions about TV SONY