User manual SONY Audio System : 4 free PDF user manuals

Q: Why does the sound from my SONY DRIVE S audio system only come from the front speakers?

If your SONY DRIVE S audio system is only emitting sound from the front speakers, several causes may be behind this issue. Here’s how to resolve it: 1. Check the speaker connections Make sure all the cables for the rear speakers are properly connected, with no loose connections or disconnections. A poorly connected cable can prevent sound from coming out of these speakers. 2. Audio settings and speaker configuration Access the audio settings menu of your system. Check that the rear speakers are enabled and that the audio output mode is set for surround or multi-channel sound, not just front stereo. Also, check the balance and fader settings to ensure that sound is not directed only to the front. 3. Audio source used Some audio media or sources (like certain files or Bluetooth devices) may only output sound to the front speakers. Try different sources (CD, USB, Bluetooth) to see if the problem persists. 4. Firmware update Check if a firmware update is available for your SONY DRIVE S system. An update may fix bugs related to speaker management. 5. System reset If none of the previous steps work, perform a factory reset. This can resolve configuration errors that limit audio output to only the front speakers. By following these tips, you should be able to restore sound output to all speakers of your SONY DRIVE S system.

Q: How to change the display color on the SONY DRIVE S audio system?

On your SONY DRIVE S audio system, you can change the display color using the ILLUM (Illumination) option available in the DISPLAY Setup menu. This function allows you to choose between two different lighting colors for the screen backlight. Steps to change the display color: Press the MENU button to open the setup menu. Turn the control knob to select DISPLAY setup , then press the button. Turn the control knob to select ILLUM (Illumination), then press the button. Turn the control knob to choose between the two color options: [1] or [2] . Press the control knob to confirm your choice. You can also adjust the display brightness by selecting the DIMMER option in the same DISPLAY Setup menu. This function allows you to enable or disable the reduced brightness mode (options: [ON] or [OFF]). If you want to return to normal display after your changes, press the (back) button twice to exit the setup menu.

Q: How to disable demo mode on the SONY DRIVE S audio system?

To disable demo mode on your SONY DRIVE S audio system, follow these steps: Turn on the system : press the power button to turn the device on. Access the settings menu : use the Menu or Settings button located on the device or the remote control. Look for the “Demo Mode” option : navigate through the settings using the arrows or selector until you find the Demo Mode option. Disable demo mode : select this option and choose Disable or Off to exit demo mode. Confirm the change : if a confirmation is requested, validate to apply the change. Once these steps are completed, the audio system should operate normally without displaying the demonstrations. If demo mode persists, try resetting the device to factory settings or contact SONY support for further assistance.

Q: How to connect an AUX cable to the SONY DRIVE S audio system?

To connect an external device to your SONY DRIVE S audio system via an AUX cable, follow the steps below: Steps to connect the AUX cable Locate the AUX jack : On your SONY DRIVE S system, find the auxiliary audio input jack (AUX). It is usually a 3.5 mm jack, often indicated by the label "AUX" or a similar symbol. Prepare the cable : Use an audio cable with 3.5 mm jack connectors on both ends. Connect the cable : Insert one end of the cable into the AUX jack of your audio system, and the other end into the headphone or audio output of the device you want to connect (smartphone, tablet, MP3 player, etc.). Select the audio source : On the SONY DRIVE S system, choose the AUX input as the audio source. This is usually done via a "Source" button or a selection menu on the device. Check the connection : Start audio playback on the connected device and adjust the volume on the SONY DRIVE S system to listen to the sound. By following these steps, you will be able to easily listen to music from your external device on your SONY DRIVE S system via the AUX connection.