Q: Why does the clock on the SONY A37 reset and not keep the date and time?

The SONY A37 is equipped with a rechargeable internal battery whose role is to keep the date, time, and other settings even when the device is turned off. If your clock resets every time you turn it on and does not keep its settings, this indicates that this internal battery is likely discharged or faulty . Solutions Leave the device plugged into the power adapter or charge it fully for several hours to recharge the internal battery Once recharged, set the date and time again via MENU → Date/Time Settings , then turn the device off and on again to check that the settings are retained If the problem persists after a full recharge, the internal battery has likely reached the end of its lifespan and will need to be replaced by an authorized SONY repairer While waiting for a repair, you will need to manually set the time and date each time you use it via the Date/Time Settings menu.

Q: How to connect the Sony Alpha A7C II to a computer?

To connect your Sony Alpha A7C II to a computer , you have three complementary methods: USB Type-C Connection : The camera comes with a USB Type-C cable. Simply plug this cable into the USB-C port located on the side of your device and a USB port on your computer. It will automatically recognize the device as a removable drive or storage device, depending on your operating system. You can then directly access the images stored on the camera's SD card to download, organize, and edit them. Memory Card Reader : You can remove the SD card from the camera (by opening the protective cover) and insert it directly into a compatible card reader on your computer. This method is often faster for bulk transfers and does not drain the camera's battery. Imaging Edge Desktop Software : For a more advanced experience, download and install Sony's free Imaging Edge Desktop suite. This software not only allows you to transfer your photos but also to: Take remote shots by controlling the camera from your computer Develop and process RAW files recorded with your Alpha A7C II Manage and edit your entire photo library You can download Imaging Edge Desktop for free from the official Sony website dedicated to software. A USB connection or Wi-Fi connection can be used with this software. Before connecting your device for the first time, ensure that your computer has sufficient charge to avoid any interruptions during file transfer.

Q: How to enable or disable shutter release without a memory card on the Sony Alpha A7 III?

The Sony Alpha A7 III has a feature called Release w/o Card that controls whether the shutter can be released when no memory card is inserted in the camera. This option is useful to avoid taking photos that will not be saved due to lack of recording media. To access this feature, turn on your Sony Alpha A7 III camera, then press the MENU button. Next, navigate to the Setup tab (represented by a tool icon). In this menu, look for the Release w/o Card option. Once the option is selected, you can configure its behavior: select Enabled if you want to allow shutter release even without a memory card, or Disabled to prevent release in this situation. Confirm your choice and exit the menu. By leaving this option disabled , the camera will refuse to release the shutter if no memory card is inserted, protecting you from accidental unrecorded shots. By enabling it, you will be able to release the shutter for testing or other needs, although images will not be saved without a card.

Q: How to disable the automatic standby on the SONY CYBERSHOT DSC-HX60?

To disable the automatic standby of your SONY CYBERSHOT DSC-HX60 , you need to access the settings menu and change the power saving setting. Steps to follow: Turn on the camera by pressing the ON/OFF (Power) button. Press the MENU button to access the camera menus. Navigate to the Settings tab (usually identified by a gear icon) using the v/V/b/B navigation buttons on the control dial. Look for the option “H. start power saving.” (Start time for power saving) which controls the automatic power-off after inactivity. Select this option by pressing z (the center button of the control dial). Choose the value “30 Min” to extend the delay before standby (the available options are usually 1 Min, 2 Min, 5 Min, and 30 Min). The default duration is 2 minutes. Press z to confirm your choice and exit the menu by pressing the MENU button. Important: The SONY CYBERSHOT DSC-HX60 does not have an option to completely disable automatic standby. By selecting “30 Min,” you extend the inactivity duration before automatic shutdown, but the device will eventually turn off after this period to save battery. This function helps preserve the battery life of your lithium-ion NP-BX1 during long sessions of inactivity. You can refer to the Built-in Guide of your device by pressing the corresponding button from the menu for additional explanations on each setting parameter.

Q: What does the "remaining shots" indicator mean on the Sony DSC-HX50V camera screen?

The "remaining shots" indicator displayed on your Sony DSC-HX50V camera screen shows the estimated number of photos you can still take with the inserted memory card. How is this number calculated? Memory card capacity: The larger the capacity of the card (measured in GB), the more photos you can store. Image resolution and quality: Photos taken in high resolution or maximum quality take up more space, reducing the total number of remaining shots. Image format: RAW or uncompressed files are larger than compressed JPEG files, thus impacting the remaining capacity. In summary, this indicator informs you of the number of photos you can still capture before the memory card is full, based on the current shooting settings.

Q: How to set the shutter speed on a SONY NEX-6 hybrid camera?

To set the shutter speed on your SONY NEX-6 hybrid camera, follow the steps below: 1. Turn on the camera Make sure your NEX-6 is powered on. 2. Select the appropriate shooting mode Shutter Priority Mode (S) : you can adjust only the shutter speed, the camera automatically adjusts the aperture. Manual Mode (M) : you can adjust both the shutter speed and the aperture. To change modes, turn the mode dial on the top of the camera. 3. Adjust the shutter speed Use the control dial to scroll through the different shutter speeds displayed on the screen. Speeds are usually indicated in fractions of a second (e.g., 1/60, 1/250) or in whole seconds for long exposures. 4. Check the exposure Observe the exposure indicator on the screen to ensure that the photo will be properly exposed. Adjust the speed or aperture if necessary. 5. Take the photo Once the settings are made, press the shutter button to capture your image. This setting allows you to control the sharpness of moving subjects and the amount of light entering the camera, thus offering greater creativity in your shots.

Question 1

Why does the clock on the SONY A37 reset and not keep the date and time?

Accepted Answer

The SONY A37 is equipped with a rechargeable internal battery whose role is to keep the date, time, and other settings even when the device is turned off.

If your clock resets every time you turn it on and does not keep its settings, this indicates that this internal battery is likely discharged or faulty.

Solutions

Leave the device plugged into the power adapter or charge it fully for several hours to recharge the internal battery
Once recharged, set the date and time again via MENU → Date/Time Settings, then turn the device off and on again to check that the settings are retained
If the problem persists after a full recharge, the internal battery has likely reached the end of its lifespan and will need to be replaced by an authorized SONY repairer

While waiting for a repair, you will need to manually set the time and date each time you use it via the Date/Time Settings menu.

Question 2

How to connect the Sony Alpha A7C II to a computer?

Accepted Answer

To connect your Sony Alpha A7C II to a computer, you have three complementary methods:

USB Type-C Connection: The camera comes with a USB Type-C cable. Simply plug this cable into the USB-C port located on the side of your device and a USB port on your computer. It will automatically recognize the device as a removable drive or storage device, depending on your operating system. You can then directly access the images stored on the camera's SD card to download, organize, and edit them.

Memory Card Reader: You can remove the SD card from the camera (by opening the protective cover) and insert it directly into a compatible card reader on your computer. This method is often faster for bulk transfers and does not drain the camera's battery.

Imaging Edge Desktop Software: For a more advanced experience, download and install Sony's free Imaging Edge Desktop suite. This software not only allows you to transfer your photos but also to:

Take remote shots by controlling the camera from your computer
Develop and process RAW files recorded with your Alpha A7C II
Manage and edit your entire photo library

You can download Imaging Edge Desktop for free from the official Sony website dedicated to software. A USB connection or Wi-Fi connection can be used with this software. Before connecting your device for the first time, ensure that your computer has sufficient charge to avoid any interruptions during file transfer.

Question 3

How to enable or disable shutter release without a memory card on the Sony Alpha A7 III?

Accepted Answer

The Sony Alpha A7 III has a feature called Release w/o Card that controls whether the shutter can be released when no memory card is inserted in the camera. This option is useful to avoid taking photos that will not be saved due to lack of recording media.

To access this feature, turn on your Sony Alpha A7 III camera, then press the MENU button. Next, navigate to the Setup tab (represented by a tool icon). In this menu, look for the Release w/o Card option.

Once the option is selected, you can configure its behavior: select Enabled if you want to allow shutter release even without a memory card, or Disabled to prevent release in this situation. Confirm your choice and exit the menu.

By leaving this option disabled, the camera will refuse to release the shutter if no memory card is inserted, protecting you from accidental unrecorded shots. By enabling it, you will be able to release the shutter for testing or other needs, although images will not be saved without a card.

Question 4

How to disable the automatic standby on the SONY CYBERSHOT DSC-HX60?

Accepted Answer

To disable the automatic standby of your SONY CYBERSHOT DSC-HX60, you need to access the settings menu and change the power saving setting.

Steps to follow:

Turn on the camera by pressing the ON/OFF (Power) button.
Press the MENU button to access the camera menus.
Navigate to the Settings tab (usually identified by a gear icon) using the v/V/b/B navigation buttons on the control dial.
Look for the option “H. start power saving.” (Start time for power saving) which controls the automatic power-off after inactivity.
Select this option by pressing z (the center button of the control dial).
Choose the value “30 Min” to extend the delay before standby (the available options are usually 1 Min, 2 Min, 5 Min, and 30 Min). The default duration is 2 minutes.
Press z to confirm your choice and exit the menu by pressing the MENU button.

Important: The SONY CYBERSHOT DSC-HX60 does not have an option to completely disable automatic standby. By selecting “30 Min,” you extend the inactivity duration before automatic shutdown, but the device will eventually turn off after this period to save battery. This function helps preserve the battery life of your lithium-ion NP-BX1 during long sessions of inactivity.

You can refer to the Built-in Guide of your device by pressing the corresponding button from the menu for additional explanations on each setting parameter.

Question 5

How to add the Italian language to the Sony Alpha A7 III camera if it is not available?

Accepted Answer

If the Italian language is not available in the settings of your Sony Alpha A7 III, here are the steps to follow to try to add it:

1. Check the firmware version

The availability of languages often depends on the version of the firmware installed on your device. Therefore, it is important to check if your device has the latest firmware.

2. Update the firmware

Visit the official Sony website, support section for the Alpha A7 III model.
Download the latest available firmware update.
Carefully follow the instructions provided by Sony to install the update on your device.

3. Check the language settings

After the update, access the language settings of your camera to see if Italian is now available.

4. If Italian is still missing

If the Italian language still does not appear, it is possible that your model or the firmware version does not officially support it. In this case, you can:

Contact Sony customer service for specific assistance.
Consider using another available language that you understand.

These steps will generally allow you to add or activate the Italian language on your Sony Alpha A7 III.

Question 6

How to set the focus to infinity on the Sony DSC-RX10M3?

Accepted Answer

To set the focus to infinity on your Sony DSC-RX10M3 camera, follow these simple steps:

Switch to manual focus mode (MF)

Turn on the camera and make sure you are in photo or video mode.
Press the AF/MF button to switch from autofocus to manual focus.

Adjust the focus ring

Turn the focus ring located on the lens.
Rotate the ring until the focus mark aligns with the ∞ (infinity) symbol.

Verification

Look through the viewfinder or on the LCD screen to check that the image is sharp at infinity.
You can make slight adjustments if necessary to achieve the desired sharpness.

This setting is particularly useful for landscape shots or very distant objects where sharpness needs to be maximized at great distances.

Question 7

How to properly clean a SONY NEX-6B mirrorless camera?

Accepted Answer

The SONY NEX-6B requires regular maintenance to preserve the quality of your photos and the lifespan of the device. Before any handling, turn off the device and remove the battery to avoid any accidental damage.

For cleaning the body, use a soft, clean, and dry cloth, preferably microfiber, to remove dust and smudges from the exterior. If necessary, you can slightly dampen the cloth with distilled water, ensuring that moisture does not enter the device's openings. Clean the surface of the flash with a soft cloth to prevent impurities from adhering and burning due to the heat emitted.

For the lens, start by gently blowing on it with an air blower to eliminate dust. For persistent marks or stains, use a clean microfiber cloth with a specialized lens cleaning solution, applying the liquid to the cloth and not directly on the lens. Always put the front lens cap on when you are not using the device.

The LCD screen should be handled with care: do not press on it and avoid holding it directly to transport the device. If there are black or bright spots on the screen, this is normal in the manufacturing process and does not affect your images.

Cleaning the image sensor is a very delicate operation that requires specific tools. If dust adheres to the sensor during a lens change, it may appear as dark spots on images depending on shooting conditions. To minimize this risk, always change lenses quickly in a dust-free environment while holding the device tilted downwards. Never leave the device without a mounted lens. If the sensor requires professional cleaning, entrust this task to a Sony dealer or an authorized service center.

Regarding moisture condensation, if you move the device from a cold place to a warm place, enclose it in a plastic bag and let it acclimate to room temperature for about an hour before using it. If condensation appears, turn off the device and wait about an hour for the moisture to completely evaporate before use.

To extend the life of your NEX-6B, avoid very hot, very dry, or very humid places, as well as sandy or dusty environments that can irreparably damage the device. Store the device in a dry and temperate place, always with the front lens cap attached.

Question 8

What does the "remaining shots" indicator mean on the Sony DSC-HX50V camera screen?

Accepted Answer

The "remaining shots" indicator displayed on your Sony DSC-HX50V camera screen shows the estimated number of photos you can still take with the inserted memory card.

How is this number calculated?

Memory card capacity: The larger the capacity of the card (measured in GB), the more photos you can store.
Image resolution and quality: Photos taken in high resolution or maximum quality take up more space, reducing the total number of remaining shots.
Image format: RAW or uncompressed files are larger than compressed JPEG files, thus impacting the remaining capacity.

In summary, this indicator informs you of the number of photos you can still capture before the memory card is full, based on the current shooting settings.

Question 9

How can I find out the number of shutter actuations of the Sony DSC-HX50V?

Accepted Answer

The Sony DSC-HX50V does not have a function to know the number of shutter actuations (shutter count) of the device. Unlike some professional cameras or certain newer Sony models, this compact does not store this information in the EXIF metadata of its photos, making it impossible to extract the number of actuations via software or online services.

Since the DSC-HX50V only records in JPEG format (without the possibility of RAW mode), and without the integration of the shutter count in the file data, there is no reliable method to check this data afterwards. Online specialized tools or software like ShutterCount or ExifTool will not be able to extract this information for this specific model, as it is simply not recorded.

Alternatives to assess the wear of the device: You can contact Sony customer service with your serial number and proof of purchase to know the previous usage conditions. A visual inspection of the casing and performance can also provide clues about the age and intensive use of the device. Check the condition of the flash, buttons, LCD screen, and 30x optical zoom for any signs of wear.

Question 10

How to set the shutter speed on a SONY NEX-6 hybrid camera?

Accepted Answer

To set the shutter speed on your SONY NEX-6 hybrid camera, follow the steps below:

1. Turn on the camera

Make sure your NEX-6 is powered on.

2. Select the appropriate shooting mode

Shutter Priority Mode (S): you can adjust only the shutter speed, the camera automatically adjusts the aperture.
Manual Mode (M): you can adjust both the shutter speed and the aperture.

To change modes, turn the mode dial on the top of the camera.

3. Adjust the shutter speed

Use the control dial to scroll through the different shutter speeds displayed on the screen.
Speeds are usually indicated in fractions of a second (e.g., 1/60, 1/250) or in whole seconds for long exposures.

4. Check the exposure

Observe the exposure indicator on the screen to ensure that the photo will be properly exposed. Adjust the speed or aperture if necessary.

5. Take the photo

Once the settings are made, press the shutter button to capture your image.

This setting allows you to control the sharpness of moving subjects and the amount of light entering the camera, thus offering greater creativity in your shots.

User manual SONY Camera : user manuals and guides in PDF

Models SONY Camera most viewed

Other categories SONY

Recent questions about Camera SONY