X307USTi - Projector OPTOMA - Free user manual and instructions
Find the device manual for free X307USTi OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | OPTOMA |
| Model | X307USTi |
| Product type | Ultra-short throw projector |
| Display technology | DLP |
| Native resolution | WXGA (1280 x 800) |
| Brightness | 3000 ANSI lumens |
| Contrast ratio | 20,000:1 |
| Throw ratio | 0.25:1 |
| Light source | Lamp (duration: up to 10,000 hours) |
| Dimensions (W x D x H) | 388 x 360 x 120 mm |
| Weight | 5.6 kg |
| Power supply | 100-240 V, 50/60 Hz, power consumption 260 W |
| Inputs | 2x HDMI, 1x VGA, 1x USB-A, 1x Audio 3.5 mm |
| Outputs | 1x Audio 3.5 mm, 1x 10 W speaker |
| Main features | Automatic keystone correction, manual focus, wireless projection (optional) |
| Maintenance and cleaning | Clean the air filter every 500 hours; replace the lamp at end of life |
| Security | Kensington lock, PIN code lock function |
| Spare parts and repairability | Lamp and air filter available; repair by authorized technician |
| General information | User manual available online; lamp life reduced in Eco mode |
Frequently Asked Questions - X307USTi OPTOMA
How to install the X307USTi projector?
Place the projector about 30 cm from the wall or screen to get a 100-inch image. Use the adjustable foot to tilt the image and the automatic keystone correction will adjust the geometry.
What is the maximum supported resolution?
The native resolution is WXGA (1280x800), but the projector accepts signals up to 1920x1080 (Full HD) via HDMI.
How to connect a wireless device?
The projector does not have built-in Wi-Fi. Use a wireless HDMI adapter or an optional USB dongle for wireless projection.
What to do if the lamp does not turn on?
Check that the power cord is properly plugged in and the power indicator is on. If the indicator blinks red, the lamp may be at end of life or there is a temperature problem; refer to the troubleshooting section of the manual.
How to clean the air filter?
Turn off the projector and unplug it. Remove the filter cover on the side, take out the foam filter and wash it with warm water and mild detergent. Rinse, dry completely and put it back in place.
What is the minimum projection distance?
With a throw ratio of 0.25:1, you can get an 80-inch image at only 25 cm from the wall.
Can I replace the lamp myself?
Yes, lamp replacement is user-friendly. Follow the instructions in the manual to access the lamp compartment and install an original OPTOMA replacement lamp.
Does the projector have built-in speakers?
Yes, it includes a 10-watt speaker sufficient for a small room. For better sound, connect external speakers via the audio output.
How to activate Eco mode to save the lamp?
Access the OSD menu, go to 'Settings' > 'Lamp Mode' and select 'Eco'. This reduces brightness but extends lamp life up to 10,000 hours.
Where can I download the full manual?
The manual is available for free on notice-facile.com for the X307USTi model. You can download it in PDF or request a translation.
User questions about X307USTi OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual X307USTi - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X307USTi by OPTOMA.