S300 - Projector OPTOMA - Free user manual and instructions
Find the device manual for free S300 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | DLP projector |
| Brand | OPTOMA |
| Model | S300 |
| Dimensions (L x W x H) | 27 x 22 x 8 cm |
| Weight | 2.5 kg |
| Power supply | 100-240 V, 50/60 Hz, 200 W |
| Native resolution | SVGA (800 x 600) |
| Brightness | 3000 ANSI lumens |
| Contrast | 20,000:1 |
| Lamp life | 5000 hours (normal mode), 8000 hours (eco mode) |
| Video inputs | HDMI, VGA, composite, S-Video |
| Main features | Vertical keystone correction, manual focus, 1.1x zoom, built-in 2W speaker |
| Maintenance and cleaning | Clean the air filter every 500 hours; use a soft dry cloth for the lens |
| Security | Kensington lock, password protection, auto shutdown after 30 minutes of inactivity |
| Spare parts and repairability | Replacement lamp available (model: BL-FU200C), replaceable air filter |
| General information | 2-year warranty, operating temperature 5-35°C, noise level 28 dB (eco mode) |
Frequently Asked Questions - S300 OPTOMA
How to clean the projector air filter?
Turn off the projector and unplug it. Remove the filter cover, take out the filter and vacuum the dust with a vacuum cleaner. Put the filter back and close the cover. Clean every 500 hours of use.
How to replace the lamp of the OPTOMA S300 projector?
Turn off the projector, let it cool for 30 minutes, then unplug it. Remove the lamp cover, unscrew the fixing screws, remove the old lamp and insert the new one (model BL-FU200C). Screw the cover back on and reset the lamp counter via the menu.
How to connect a computer to the projector?
Use a VGA or HDMI cable. Connect one end to the computer and the other to the corresponding input on the projector. Select the VGA or HDMI source via the Source menu or the remote control.
How to correct keystone distortion?
Use the vertical keystone correction: press the 'Keystone' button on the remote control or navigate to the 'Display' menu -> 'Keystone correction'. Adjust with the arrow keys until the image is rectangular.
What to do if the projector does not turn on?
Check that the power cord is properly connected and that the outlet works. Make sure the power indicator is on. If the indicator flashes red, wait for the lamp to cool down; if the problem persists, replace the lamp or contact customer service.
How to adjust focus and zoom?
Turn the focus ring on the lens to get a sharp image. Use the zoom ring to adjust the image size without moving the projector.
What is the recommended projection distance?
The distance varies depending on the desired image size. For example, for an 80-inch (diagonal) image, place the projector about 2.5 meters from the screen. Refer to the distance table in the manual for precise dimensions.
How to use the built-in speaker?
The 2W speaker is active by default. Make sure the audio source is connected via HDMI (audio is transmitted) or via a 3.5mm audio jack (audio input). Adjust the volume via the remote control or the Audio menu.
Can I use the projector outdoors?
Yes, but avoid direct sunlight and protect it from moisture. Use an extension cord and a waterproof outlet. The brightness of 3000 lumens allows use at dusk or at night.
How to reset the lamp counter?
After replacing the lamp, go to the 'Settings' menu -> 'Lamp counter' -> 'Reset'. Confirm by pressing 'OK'. This resets the counter to zero.
User questions about S300 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual S300 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S300 by OPTOMA.