OPS200 - Projector OPTOMA - Free user manual and instructions
Find the device manual for free OPS200 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | DLP projector |
| Brand | Optoma |
| Model | OPS200 |
| Native resolution | 1920 x 1080 (Full HD) |
| Brightness | 3200 ANSI lumens |
| Contrast ratio | 15000:1 |
| Light source | 203 W lamp |
| Lamp life | Up to 6000 hours (normal mode) |
| Throw ratio | 1.1:1 manual zoom |
| Keystone correction | Vertical ±40° |
| Dimensions (W x D x H) | 316 x 244 x 108 mm |
| Weight | 3.2 kg |
| Power supply | 100-240 V AC, 50/60 Hz |
| Power consumption | 260 W (max), 0.5 W standby |
| Video inputs | 2x HDMI, 1x VGA, 1x composite |
| Audio ports | 1x 3.5 mm audio output |
| Built-in speaker | 1 x 8 W |
| Noise level | 29 dB (eco mode) |
| Maintenance and cleaning | Clean the air filter every 200 hours with a vacuum cleaner |
| Spare parts | Replacement lamp SP.8K01GC01, remote control |
| Repairability | Repairability index 7.2/10 (according to French scale) |
Frequently Asked Questions - OPS200 OPTOMA
How to turn on the Optoma OPS200 projector?
Plug in the power cable, then press the Power button located on the top of the projector or on the remote control. Wait a few seconds for the image to appear.
What to do if the image is blurry?
Use the focus ring located around the lens. Turn it gently until you get a clear image. Also check the recommended projection distance.
How to connect a computer to the projector?
Use an HDMI or VGA cable. Connect one end to your computer's output and the other to the corresponding input on the projector. Select the appropriate source via the menu or the Source button.
The projector does not turn on, what to do?
Check that the power cable is properly plugged in and that the wall outlet works. If the Power LED flashes red, wait for the lamp to cool down before trying again.
How to clean the air filter?
Turn off the projector and unplug it. Open the air filter cover (usually on the side). Remove the filter and clean it with a vacuum cleaner. Put it back. This operation is recommended every 200 hours of use.
What is the lamp life?
The lamp can last up to 6000 hours in normal mode and 8000 hours in eco mode. The screen displays a warning when the end of life approaches.
How to replace the lamp?
Turn off the projector and let it cool for 30 minutes. Unscrew the lamp cover on the back. Replace the old lamp with a new one (ref. SP.8K01GC01). Screw the cover back on and reset the lamp counter in the menu.
The projector displays 'No signal', why?
Make sure the source (computer, DVD player) is on and the cable is properly connected. Press the Source button to cycle through inputs. If the problem persists, test with another cable.
How to use keystone correction?
In the Display or Image menu, enable vertical keystone correction. Use the directional keys to straighten the image. A correction of approximately ±40° is possible.
Where to find the full manual for the Optoma OPS200?
The PDF manual is available on our site notice-facile.com. You can download it for free by clicking the Download button at the top of this page.
User questions about OPS200 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual OPS200 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPS200 by OPTOMA.