EH515T - Projector OPTOMA - Free user manual and instructions
Find the device manual for free EH515T OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | DLP laser projector |
| Brand | OPTOMA |
| Model | EH515T |
| Native resolution | WUXGA (1920 x 1200) |
| Brightness | 5,000 ANSI lumens |
| Light source | Phosphor laser, lifespan 20,000 h |
| Contrast ratio | 300,000:1 (DCR) |
| Lens | Motorized zoom 1.6x, vertical/horizontal shift |
| Dimensions (L x W x H) | 424 x 337 x 140 mm |
| Weight | 8.5 kg |
| Power supply | AC 100-240V, 50/60 Hz, power consumption 420 W |
| Connectivity | 2x HDMI 1.4a, VGA, USB, RS232, RJ45, 12V trigger |
| Main features | HDR10, 3D compatible, keystone correction, PIP, HDBaseT |
| Noise level | 32 dB (normal mode), 29 dB (economic mode) |
| Maintenance and cleaning | Clean the air filter every 3 months, avoid solvents |
| Security | Kensington lock, password security |
| Spare parts and repairability | Light source not user-replaceable; parts available via after-sales service |
| General information | User manual available for download as PDF (96 pages) |
Frequently Asked Questions - EH515T OPTOMA
How to turn on the EH515T projector?
Plug in the power cord, then press the Power button on the control panel or the remote control. Wait for the indicator to light up green.
What is the maximum supported resolution?
The projector displays a native resolution of WUXGA (1920 x 1200) and accepts signals up to 4K via HDMI.
How to clean the air filter?
Turn off the projector, unplug it. Remove the air filter, clean it with a vacuum cleaner or soapy water. Let it dry completely before reinstalling.
Can I replace the light source myself?
No, the laser light source is not user-replaceable. Contact OPTOMA after-sales service for any intervention.
How to connect a computer to the projector?
Use an HDMI or VGA cable to connect the computer to the corresponding port on the projector. Select the appropriate source via the Input menu.
The projector displays 'No signal', what to do?
Check the connection cable, the selected input source, and that the source device is turned on. Restart the projector if necessary.
How to use the HDR function?
Enable HDR in the projector's Image menu. Make sure the source (Blu-ray player, etc.) sends an HDR signal. The projector adjusts settings automatically.
What is the projection distance for a 100-inch image?
With the zoom set to maximum, the distance is approximately 2.5 meters. Refer to the projection table in the manual for precise values.
How to adjust the lens shift?
Use the shift knobs on the lens or the remote control. Turn to move the image vertically (up to 50%) and horizontally (up to 10%).
Does the projector get very hot?
Under normal use, the internal temperature is regulated by fans. Ensure adequate ventilation and do not block the air vents.
User questions about EH515T OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual EH515T - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EH515T by OPTOMA.