OPTOMA

DS317e - Projector OPTOMA - Free user manual and instructions

Find the device manual for free DS317e OPTOMA in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice OPTOMA DS317e - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeDLP Projector
BrandOptoma
ModelDS317e
Native resolutionSVGA (800 x 600)
Brightness3,000 ANSI lumens
Contrast ratio20,000:1
Light sourceLamp (lamp life up to 10,000 hours in eco mode)
Dimensions (W x D x H)316 x 224 x 106 mm
WeightApprox. 2.5 kg
Power supplyAC 100-240V, 50/60 Hz
Power consumption225 W (operating), < 0.5 W standby
Video inputs1 x HDMI, 1 x VGA (D-Sub 15), 1 x composite (RCA), 1 x S-Video (mini DIN)
Audio input1 x stereo audio (RCA)
Outputs1 x VGA (pass-through), 1 x stereo audio (3.5 mm jack)
Control1 x RS-232 port, IR remote control
Keystone correctionVertical ±40°
Projection distance1.2 to 12 m (image size 27 to 300 inches)
Throw ratio1.96 ~ 2.18:1
Built-in speaker1 x 2 W
Noise level29 dB (eco), 34 dB (normal)
Main featuresPresentation mode, keystone correction, digital zoom, quick standby
Maintenance and cleaningClean air filter every 500 hours; replace lamp after 5,000 to 10,000 hours depending on mode
SecurityPassword lock, Kensington anti-theft lock
Spare parts and repairabilityLamp (model: BL-FP200A), air filter, remote control. Lamp is user-replaceable.
General informationVersatile projector for meeting rooms and classrooms. Easy installation and low maintenance.

Frequently Asked Questions - DS317e OPTOMA

How to replace the lamp of the Optoma DS317e projector?
Turn off the projector and unplug it. Wait for the lamp to cool (at least 30 minutes). Unscrew the lamp cover, remove the old lamp, insert the new one (model BL-FP200A), close the cover, and reset the lamp counter via the OSD menu.
What is the native resolution of the DS317e projector?
The native resolution is SVGA (800 x 600). The projector can accept signals up to UXGA (1600 x 1200) in compression.
How to connect a computer to the projector?
Use a VGA cable (D-Sub) to connect the computer's output to the projector's VGA input. You can also use an HDMI cable if your computer has an HDMI output. Then select the corresponding input source via the menu or remote control.
What to do if the projected image is distorted (keystone)?
Use automatic or manual keystone correction. Access the OSD menu, choose 'Keystone correction', and adjust the vertical values. You can also physically tilt the projector using the adjustable feet.
How to clean the projector's air filter?
Turn off the projector and unplug it. Remove the filter cover (usually on the side). Clean the filter with a vacuum cleaner or rinse it with lukewarm water (let it dry completely before reinstalling). Replace it every 500 hours of operation.
What is the projection distance for a 100-inch image?
With a throw ratio of 1.96:1 to 2.18:1, for a 100-inch diagonal image, the projection distance is approximately 3.9 to 4.3 meters.
Can I use the projector without the remote control?
Yes, the projector has buttons on the control panel for basic functions: power on/off, menu navigation, keystone correction, and volume adjustment.
The projector does not turn on, what should I do?
Check that the power cable is properly connected and the socket works. Ensure the lamp is correctly installed. If the power LED blinks red, it may indicate overheating or a lamp fault. Refer to the troubleshooting section of the manual.
How to adjust the sharpness of the image?
Use the focus ring on the projector's lens. Turn it until the image is sharp. If necessary, adjust keystone correction for a rectangular image.
Which accessories are included with the projector?
The box contains: projector, remote control with batteries, power cable, VGA cable, quick start guide, and the complete manual CD.

User questions about DS317e OPTOMA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Projector in PDF format for free! Find your manual DS317e - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS317e by OPTOMA.

USER MANUAL DS317e OPTOMA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : OPTOMA

Model : DS317e

Category : Projector