MICRO - JANE - Free user manual and instructions

USER MANUAL MICRO JANE

UNFOLDING THE MICRO CARRYCOT. FOLDING THE MICRO CARRYCOT. HOOD. FOOT COVER. PROFIX SYSTEM.

WARNING: Read the instructions carefully before use and keep them for future reference.

WARNING: This product is only suitable for a child who cannot sit up unaided. WARNING: Do not leave your child unattended. WARNING: Do not let other children play unattended near the carrycot. WARNING: Do not use if any part is broken, torn or missing. WARNING: Never use the carrycot on a stand. WARNING: Do not add a mattress thicker than 40mm.

Use only of a firm, horizontal level and dry surface.

Never use accessories that have not been approved by JANÉ. Be aware of the risk of open fire and other source of strong heat, such as electric bar fires, gas fires, etc., in the near vicinity of carrycot. Regularly check the handles and the base of your carrycot for signs of wear and tear.

1.-UNFOLDING Place the JANE MICRO folding carrycot on a flat surface. Turn the ProFix system connector outwards (A). Open the fastening strap so that the side walls completely unfold (B). Make sure that the walls are properly unfolded!

3.- USING THE HOOD The hood of the JANÉ MICRO folding carrycot can be folded, unfolded and taken off. To take the hood off, undo the rear zip and then move the hood connector outwards to separate it from the carrycot (A).

2.- FOLDING Fold the hood of the JANE MICRO folding carrycot. Close the foot cover. Pull the fastening straps and secure them in the points on the base of the carrycot (A). Fold the ProFix system connector inwards (B).

4.- OPENING THE FOOT COVER To open the foot cover of the JANÉ MICRO folding carrycot, undo the zip to the required position and fold the upper part back (4) after undoing the clasps. To completely remove the foot cover undo the two zips (4A).

To fit the hood onto the JANÉ MICRO carrycot insert the hood connector into the frame and fasten the rear zip.

MICRO To fasten the JANE MICRO carrycot onto a Jane chassis, position the carrycot so that the child’s head is facing forwards and insert the Profix connectors into the slots on the armrests of the chassis, that are designed for this; listen for the click indicating it is fastened.

Clean the plastic parts with soap and warm water, then carefully dry all the components.

TAKE CARE! Before using it, make sure that all the locking catches are closed.

If the upholstery is exposed to sunlight for prolonged periods of time it may affect the colour of the fabric.

To release the carrycot, pull the unlocking buttons on the connectors upwards and separate the JANE MICRO folding carrycot from the pushchair by pulling it upwards.

Your CAPAZO MICRO baby carrier has a guarantee with precise specifications for correct maintenance, it is important to keep these for perfect validity.

Hand wash at temperature no higher than 30° C. Leave to dry naturally in a shaded place.

5.- FASTSÄTTNING I EN JANÉ-STOL