Question 1

Can the baby seat of the JANE MATRIX LIGHT stroller be oriented forward or backward?

Accepted Answer

The JANE MATRIX LIGHT seat does not have a variable forward/backward orientation like a traditional stroller. Instead, it offers two main reclining positions that adapt to your child's age and development:

Reclined position (Group 0): the backrest is fully inclined so that the baby travels lying down. This position is highly recommended for newborns and babies up to about 6 months, providing excellent head and neck support as well as optimal safety.
Sitting position (Group 0+): the backrest is upright so that the baby travels sitting, suitable when the baby has gained more strength and independence, usually from 6 months onwards, allowing them to better observe their surroundings.

The MATRIX LIGHT features a 4-position reclining backrest for added flexibility. Positions R2 and R3 are intermediate and allow you to gradually adjust your baby's position according to their growth.

When using the MATRIX LIGHT in a car, it must be installed facing backward (against the direction of travel) for safety reasons. However, when you attach it to a JANÉ stroller chassis with the PRO-FIX system, you benefit from the flexibility of both backrest positions (reclined or sitting) without orientation constraints.

Question 2

Where are the release buttons on the JANE MATRIX LIGHT car seat?

Accepted Answer

The release buttons on the JANE MATRIX LIGHT car seat are essential for easily detaching the seat from the stroller chassis. Here’s where to find them and how to use them:

Locations of the release buttons

On the sides of the seat: Look for small levers or buttons located on both sides of the car seat. These buttons are often slightly recessed to prevent accidental activation.
At the back of the seat: Sometimes, a button or handle is located at the back, near the base that connects to the stroller chassis.

Tips for locating them

Ensure that the seat is properly positioned in the frame, as some buttons are only accessible when the seat is correctly installed.
Check that no items (like a cover or accessory) are blocking access to the buttons.
Press firmly but without forcing the buttons to release the seat.

By following these guidelines, you should be able to locate and use the release buttons on the JANE MATRIX LIGHT easily.

Question 3

How to remove the car seat (baby comfort) from the JANE MATRIX LIGHT stroller?

Accepted Answer

To remove the car seat (baby comfort) from the JANE MATRIX LIGHT stroller, follow these simple steps:

Steps to remove the car seat from the stroller

Locate the release buttons or levers: They are usually found on the sides or at the back of the car seat.
Press these buttons or levers simultaneously: This unlocks the car seat from the stroller.
Lift the car seat: While holding the buttons down, lift the seat upwards to detach it from the stroller.
Check that the seat is completely detached: Ensure that there are no more attachments before moving it away from the stroller.

These steps ensure a safe and easy removal of the car seat from the JANE MATRIX LIGHT stroller.

User manual JANE Baby stroller : user manuals and guides in PDF

Models JANE Baby stroller most viewed

Other categories JANE

Recent questions about Baby stroller JANE