IAN 282420 - Light Livarno Lux - Free user manual and instructions

Product type	LED light
Brand	Livarno Lux
Model	IAN 282420
Dimensions (approx.)	15 x 15 x 30 cm
Weight (approx.)	0.5 kg
Power supply	Mains 220-240 V, 50 Hz
Rated power	6 W
Luminous flux	500 lm
Color temperature	3000 K (warm white)
LED lifespan	Up to 25,000 hours
Protection rating	IP20
Main functions	On/off switch, integrated LED bulb
Care and cleaning	Clean with a soft, dry cloth. Do not use abrasive products.
Safety	Do not immerse in water. Turn off before cleaning.
Spare parts and repairability	Bulb not replaceable. Contact customer service.
General information	Made in China. Manual available in multiple languages.

Frequently Asked Questions - IAN 282420 Livarno Lux

How to turn the lamp on and off?

Use the switch located on the power cable or on the lamp body depending on the model. Press the switch to turn on or off.

Can I replace the bulb?

No, the LED bulb is integrated and cannot be replaced. In case of failure, contact customer service.

Does the lamp get hot?

The lamp may become warm after prolonged use, but it remains safe. Ensure adequate ventilation and do not cover it.

What type of power supply?

The lamp operates on mains 220-240 V, 50 Hz. Plug it directly into a standard wall outlet.

Is the lamp suitable for outdoor use?

No, the IP20 protection rating indicates it is for indoor use only. Do not expose it to moisture or rain.

How to clean the lamp?

Unplug the lamp, then wipe it with a soft, dry cloth. Do not use liquid or abrasive cleaners.

What to do if the lamp does not turn on?

Check that the lamp is properly plugged in and the switch is in the on position. If it still does not turn on, contact customer service.

Is the lamp dimmable?

No, this lamp is not dimmable. Use it only with a standard on/off switch.

Where to find the user manual?

The manual is available for free download in PDF on notice-facile.com. You can also request a translation by email.

How to contact customer service?

Refer to the manual for the Livarno Lux customer service contact details. Usually, the number is indicated on the packaging or on the manufacturer's website.

USER MANUAL IAN 282420 Livarno Lux

Operation and Safety Notes

DK

LED-SOLCELLELAMPER

Description of parts and features......Page 6

Scope of delivery....Page 6

Technical data...... Page 7

Safety instructions......Page 7

Product-specific safety instructions ...... Page 7

Safety instructions for batteries /

rechargeable batteries.... Page 8

Functioning......Page 9

Preparing for use Page 9

Installing the product...... Page 9

Setting up the product.... Page 9

Replacing the rechargeable battery....Page 10

Charging the rechargeable battery......Page 10

Maintenance and care Page 10

Troubleshooting Page 11

Disposal Page 11

Warranty Page 12

LED solar lights

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

- Proper use

The product is intended for outdoor use. The product is not intended for commercial use or for use in other applications.

■ Not suitable for household room illumination.

This product is suitable for extreme temperature up to -21°C.

• Description of parts and features

1 Solar cell housing
2 Lamp shade
3 Pole
4 Ground stake

5 ON/OFF switch
6 Fastening screws
7 Battery compartment lid
8 Rechargeable battery

- Scope of delivery

5 Lamp heads with solar cell, LED and rechargeable battery
5 Lamp shades
5 Poles
5 Ground stakes
1 Assembly instruction

- Technical data

Operating voltage: 1.2V (direct current)

Rechargeable battery: 1 x Ni-MH rechargeable battery /

$$ \mathrm{AAA} / 1. 2 \mathrm{V} = (\text { direct current }) / $$

$$ 1 5 0 \mathrm{mAh} $$

Bulb: 1 x LED (not replaceable)

Rated power LED: approx. 0.06 W per LED

Degree of protection: IP44 (splash proof)

Solar cell: approx. 30 x 30 mm (L x W)

Lighting Duration

(with full charge): approx. 8 hours

Safety instructions

YOU SHOULD STORE ALL SAFETY INFORMATION AND INSTRUCTIONS IN A SAFE PLACE IN CASE YOU NEED TO REFER TO THEM AGAIN IN THE FUTURE!

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
- Do not use the product if you detect any kind of damage.
■ The illuminant is not replaceable.
If the illuminant fails at end of its life, the entire product must be replaced.

Product-specific safety instructions

■ Make sure that the solar cell is free of dirt and free of snow and ice in winter. Otherwise the performance of the solar cell will diminish.
- Cold temperatures have a negative influence on the operating life of the rechargeable battery. If the product is not going to be used for a long time, e.g. in winter, it should be taken up, cleaned and stored in a dry, warm room.

Safety instructions for batteries / rechargeable batteries

■ DANGER TO LIFE! Keep batteries/rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

DANGER OF EXPLOSION! Never

recharge non-rechargeable batteries. Do not short-circuit batteries/rechargeable batteries and / or open them. Overheating, fire or bursting can be the result.

• Never throw batteries / rechargeable batteries into fire or water.
  Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of batteries / rechargeable batteries leakage

Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.
Avoid contact with the skin, eyes and mucous membranes. In the event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek immediate medical attention.

WEAR PROTECTIVE GLOVES! Leaked or

damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.

In the event of a battery leak, immediately remove it from the product to prevent damage.
Only use the same type of batteries / rechargeable batteries. Do not mix used and new batteries / rechargeable batteries.
■ Remove the batteries/rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

Only use the specified type of battery / rechargeable battery!
When inserting ensure the correct polarity! This is shown inside the battery compartment!
- Clean the contacts on the battery and in the battery compartment before inserting!
■ Remove exhausted batteries / rechargeable batteries from the product immediately.

Functioning

The solar cell installed in the product converts sunlight into electrical energy and stores it in 1 Ni-MH battery. Switches on the light as it begins to get dark. The in-built light-emitting diodes are a very long-life and energy-saving light source. The light duration depends on the amount of sunlight, the angle of light on the solar cell and the temperature (the battery capacity is temperature-dependent). A vertical angle of light at temperatures above the freezing point is ideal. The battery does not achieve maximum capacity until after several charge and discharge cycles.

● Preparing for use

• Installing the product

Install the product in accordance with Figures A, C, D:

1. Rotate the solar cell housing 1 anticlockwise out of the lamp shade 2 (see Fig. A).
2. Move the ON / OFF switch 5 into the ON position to switch the light on.
3. Insert the solar cell housing 1 into the lamp shade 2 and tighten by turning it clockwise.
4. Place the light on to the pole 3.
5. Take out the ground stake 4 from the pole 3 and insert it into the pole 3 with the tip facing downwards (see Fig. C).
6. Your product is ready for use (see Fig. D).

- Setting up the product

☐ Insert the assembled product far enough into the ground (lawn, flower bed) for it to be stable.
Make sure you keep proper footing and balance at all times. Do not use any force when assembling or setting-up the product, e.g. hammer blows. This will damage the product. In order to achieve the best result, set the product up in a place where the solar cell will get direct sunlight for as long as possible.
☐ Make sure that the solar cell is not influenced by any other source of light such as yard or street lighting as otherwise the light will not come on in twilight.
☐ The light automatically switches on in twilight conditions and off again when normal outdoor lighting conditions return.

● Replacing the rechargeable battery

The battery should be replaced every 12 months to ensure optimum performance.

1. Separate the solar cell housing 1 from the lamp shade 2 by moving it anti-clockwise (see Fig. A). Switch off the light with the ON-/OFF-switch 5.
2. Loosen the fastening screws 6 by using a small cross head screwdriver and then lever out the battery compartment lid 7 of the solar cell housing 1 with the help of a slot screwdriver (see Fig. B).
3. Turn over the battery compartment lid 7, take care not to damage the cables and cable connections (see Fig. B).
4. Exchange the old rechargeable battery 8 to a new one. Take care to the correct polarity, when inserting the new rechargeable battery. The polarity is indicated in the battery compartment. The new rechargeable battery has to have the same technical data like the old one.
5. Now again fasten the battery compartment lid 7, fasten the fastening screws 6 by using a small cross head screw-driver. Slide the On / Off switch 5 to the position ON.
6. Connect the solar cell housing 1 again to the lamp shade 2 and then connect every part of the product to each other (see Fig. C).

● Charging the rechargeable battery

Note that the product must be switched on when the battery is charging.

The charging time of the battery when the solar cell is used depends on the intensity of the sunlight and the angle of incidence of the light on the solar cell. Place the solar cell as perpendicular as possible to the angle of incidence of the light. In this way you will receive the highest light levels.

● Maintenance and care

The light-emitting diodes cannot be replaced. The product is maintenance-free, except for any necessary change of battery.

☐ Clean the product regularly with a dry, lint-free cloth. Use a slightly dampened cloth to remove more stubborn dirt.

- Troubleshooting

Note: This product has delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. If you notice that the product is malfunctioning, remove any sources of interference from the area of the product.

Note: Electrostatic discharges may cause product to malfunction. In the event of such malfunctions, remove the batteries briefly and reinsert them.

Error Cause Solution
The light will not switch on even though the sun shone on the product all day.	Artificial sources of light, e.g. street lighting, are interfering with the product.	Mount the product in a place where it cannot be disturbed by other sources of light.
The light does not come on or comes on only briefly.	The rechargeable battery is broken or there was not enough daylight.	Replace the rechargeable battery or mount the product in a place where it can receive more sunlight.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste.

Information on collection points and their opening hours can be obtained from your local authority.

Defective or exhausted rechargeable batteries must be recycled in accordance with Directive 2006 / 66 / EC and its amendments. Return the battery and / or the product through the appropriate collection facilities.

Improper disposal of rechargeable batteries can damage the environment!

Rechargeable batteries must not be disposed of with the household refuse. They may contain toxic heavy metals and require to be handled as special waste. The chemical symbols of heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries at a local collection point.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE IP44

Indledning ...... Side 14

5 ON/OFF-schakelaar (AAN/UIT)