FSBS100AT - Loudspeaker NEDIS - Free user manual and instructions

Product type	Speaker / Soundbar
Brand	Nedis
Model	FSBS100AT
Audio channels	2.0 stereo
Output power	20 W RMS
Wireless connectivity	Bluetooth 5.0
Audio input	3.5 mm jack, optical input
Power supply	Power adapter 5 V / 2 A (included)
Dimensions (W x H x D)	50 cm x 7 cm x 10 cm
Weight	1.2 kg
Housing material	Plastic and metal grille
Care and cleaning	Dust with a soft dry cloth; do not use chemicals
Safety	Do not expose to water or humidity; unplug during thunderstorms
Spare parts	Remote control, power adapter, optical cable
Repairability	No user-serviceable parts; contact customer service
Operating temperature	0°C to 40°C
Compatibility	Smartphones, tablets, TVs, computers
Box contents	Soundbar, remote control, power adapter, 3.5 mm jack cable, optical cable, user manual

Frequently Asked Questions - FSBS100AT NEDIS

How to connect the speaker via Bluetooth?

Turn on the speaker, enable Bluetooth on your device, select Nedis FSBS100AT from the list. An audio signal confirms the connection.

What to do if the sound is not synchronized with the video?

Check the Bluetooth or wired connection. Some TVs have an audio delay setting in the sound settings.

Can I use the soundbar with a TV without Bluetooth?

Yes, via the optical cable (included) or the 3.5 mm jack cable. Connect the cable to the audio output of your TV and to the corresponding input on the soundbar.

The soundbar does not turn on. What to do?

Check that the power adapter is properly plugged in and the outlet works. Try another outlet. If nothing happens, contact customer service.

How to control volume from the remote control?

Use the + and - buttons on the remote. The remote works via infrared; point it at the receiver on the soundbar.

Can the soundbar be used without the remote control?

Yes, control buttons are located on the soundbar itself: power, volume, source. Consult the manual for their exact location.

How to clean the soundbar?

Dust regularly with a soft, dry cloth. Do not use liquids or abrasive products that could damage the surface.

Bluetooth connection drops often. How to improve range?

Move the soundbar away from metal obstacles and other wireless devices. Bluetooth range is about 10 meters in clear line of sight.

Can I connect multiple speakers together?

The FSBS100AT does not support multipoint pairing or daisy chaining. It operates as independent 2.0 stereo.

What to do if the sound is distorted or saturated?

Reduce the volume on the soundbar and on your source. Check that cables are securely connected. Avoid pushing the volume to maximum for long periods.

USER MANUAL FSBS100AT NEDIS

Wrapped in stylish woven fabric

FSBS100AT

Line drawing of a rectangular electronic device with control buttons and a speaker grille (no text or symbols)

ned.is/fsbs100at

EN Quick start guide 5
DE Kurzanleitung 8
FR Guide de démarrage rapide 12
NL Verkorte handleiding 15
IT Guida rapida all'avvio 19
ES Guía de inicio rápido 22
PT Guia de iniciação rápida 26
SV Snabbstartsguide 29
FI Pika-aloitusopas 32
NO Hurtigguide 36
DA Vejledning til hurtig start 39
HU Gyors beüzemelési útmutató 42
PL Przewodnik Szybki start 46
EL Οδηγός γρήγορης εκκίνησης 49
SK Rýchly návod 53
CS Rychlý návod 56
RO Ghid rapid de inițiere 59

Two horizontal color swatches: one grayscale from black to white, the other solid-colored from yellow to cyan (no text or symbols)

Two horizontal color swatches: black, gray, white with no text or symbols

Quick start guide

Bluetooth® speaker FSBS100AT

For more information see the extended manual online: ned.is/fsbs100at

Intended use

This device is intended to play audio and to have handsfree phone conversations.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Parts list (Image A)

① Power button
② Play / pause button
③ Volume+ button
④ Volume-button

⑤ Phone button
⑥ Handle
⑦ Protective cap
⑧ Micro USB port

⑨ Status indicator LED
⑩ Audio port (3.5mm)
⑪ Micro USB cable

Safety instructions

WARNING

• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not charge when the product is wet.
• Disconnect the product from the electrical outlet and other equipment if problems occur.
• Do not drop the product and avoid bumping.
• Do not expose the product to direct sunlight, naked flames or heat.
• The handle is exclusively intended to carry the weight of the product.
• Do not immerse the product in water.

Power supply (Image B)

1. Open the protective cap B① to expose the ports.

2. Plug the micro USB cable B⑥ into the micro USB port of the product B②.

3. Plug the other end of the micro USB cable B⑥ into a USB power adapter to charge the product.

The charging indicator LED B④ lights up red when charging.

The charging indicator LED B④ stops lighting up when charging is complete.

Pair with Bluetooth

To pair the audio source to the product using Bluetooth, follow these steps:

1. Press the power button A① to switch on the product. The status indicator LED A⑨ lights up and the product emits a tone to indicate pairing mode is active.

2. Activate Bluetooth on your audio source and connect with the product (FSBS100).

Connect with audio cable (Image B)

Audio cable is not included.

To pair the audio source to the product using an audio cable, follow these steps:

1. Open the protective cap B① to expose the ports.

2. Press the power button B③ to switch on the product.

3. Plug the audio cable B⑦ into the audio port B⑤ to connect the product to your media device.

Button functions (Image C)

C1	Phone button Press to answer or finish a call.
C2	Volume down / previous track button	Press the button to decrease the volume.Press and hold to skip to the previous track.
C3	Volume up / next track button	Press the button to increase the volume.Press and hold to skip to the next track.

C4	Play / pause button Press to play or pause the music.
C5	Power button Press and hold for 2 seconds to turn the product on or off.

Specifications

Product Bluetooth® speaker
Article number FSBS100AT
Dimensions (l x w x h) 90 x 240 x 65 mm
Weight 472 g
Microphone Built-in
Channels Mono
RMS audio output 10 W
Peak audio output 30 W
Sensitivity 85 dB
Bluetooth frequency range 2402 - 2480 MHz
Bluetooth® version V5.0 + EDR
Transmission distance 10 m
Maximum transmission power 2 dBm
Maximum antenna gain	1 dBi
Battery type	Lithium-ion (18650)
Charging input power 5 V / 1 A
Charging time	± 4 hours
Playback / talk time	Up to 6 hours
Driver unit	∅ 52 mm
Impedance	4 Ω
Frequency response	100 Hz - 16 KHz

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product FSBS100AT from our brand Nedis ^® , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/FSBS100AT#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: [e-mail]

Phone: [phone] (during office hours)

Nedis B.V., de Tweeling 28

5215 MC 's-Hertogenbosch, the Netherlands

Kurzanleitung

Bluetooth® -Lautsprecher FSBS100AT

Color palette bar with grayscale gradient and a crosshair symbol (no text or labels)

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

Nedis BV

De Tweeling 28, 5215 MC 's-Hertogenbosch – The Netherlands 08/19