ZIS8700 Healthy - Ironing board Zelmer - Free user manual and instructions

Product Type	Steam Iron Station with Ironing Board
Model	ZIS8700 Healthy
Brand	Zelmer
Dimensions (Folded)	125 x 38 x 80 cm
Weight	6.5 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	2400 W
Water Tank Capacity	1.2 L
Steam Output (Continuous)	120 g/min
Steam Output (Boost)	200 g/min
Soleplate Material	Ceramic
Ironing Board Surface	Steel mesh with foam padding
Board Height Adjustment	Yes, 70-95 cm
Board Locking Mechanism	Safety lock
Functions	Variable steam, spray, self-clean, anti-scale, auto shut-off
Maintenance	Descaling every 3 months with vinegar solution
Safety Features	Auto shut-off after 8 min inactivity, thermal fuse
Spare Parts Availability	Soleplate, water tank, steam hose, ironing board cover
Reparability Index	7.5/10 (user-replaceable parts)
Included Accessories	Iron rest pad, measuring cup, cleaning needle

Frequently Asked Questions - ZIS8700 Healthy Zelmer

How do I descale the Zelmer ZIS8700 Healthy steam station?

Mix one part white vinegar with two parts water and fill the tank. Run the steam cycle for 5 minutes, then rinse with clean water. Repeat every 3 months to maintain performance.

What should I do if the iron is not producing steam?

Check that the water tank is full and correctly inserted. Ensure the steam control is set to a high level. If still no steam, perform a descaling cycle or clean the soleplate vents with the provided needle.

How do I adjust the ironing board height?

Release the safety lock lever located under the board. Adjust the legs to your desired height (70-95 cm) and lock back the lever until it clicks firmly.

Can I use tap water in the steam generator?

Yes, but to reduce scale buildup, mix tap water with distilled water in a 1:1 ratio. In hard water areas, use only distilled water.

What does the 'Healthy' feature mean?

The Healthy system includes anti-scale protection and a self-cleaning function that prevents bacteria growth, ensuring clean steam for hygienic ironing.

How do I clean the soleplate?

Unplug the station and let it cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a mild abrasive cleaner (e.g., baking soda paste) and wipe off.

What is the auto shut-off feature?

The iron automatically switches off after 8 minutes of inactivity (no movement). The station base also shuts off if no steam is used for 10 minutes. This saves energy and enhances safety.

How do I replace the ironing board cover?

Unplug the unit. Remove the old cover by pulling it off. Align the new cover over the board and secure the elastic edge around the corners. Ensure it is tight and smooth.

Why does the iron leak water?

This may happen if the iron is not hot enough (warm-up time 2 min) or if the steam control is set too high. Also ensure the soleplate is not damaged. If problem persists, descale the unit.

Where can I find spare parts for the ZIS8700?

Spare parts such as the soleplate, water tank, and ironing board cover are available through authorized Zelmer service centers or online retailers. Use the model number ZIS8700 when ordering.

USER MANUAL ZIS8700 Healthy Zelmer

White iron (£) air conditioner with gray branding and control panel, no visible text or symbols on body

PL INSTRUKCJE UŻYTKOWANIA Generator pary

EN USER MANUAL Steam station

DE BENUTZERHANDBUCH Dampfstation

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING

Please read the instructions for use carefully prior to using the product. store these in a safe place for future reference.

DESCRIPTION

1. Programme selector
2. "on / off" button with indicator light
3. Calc'nClean" descaling button with indicator light
4. "Water tank empty" button with indicator light
5. Energy saving "Eco" button with indicator light
6. Supply hose
7. Mains cable
8. Mains cable and supply hose storage fixing
9. Boiler cap / "Calc'nClean" scale collector
10. Removable water tank
11. Level mark for maximum filling
12. Filling lid
13. Iron pad
14. Iron lock system "SecureLock"
15. Steam release button
16. Iron indicator light
17. Soleplate

GENERAL SAFETY INSTRUCTIONS

During the use, the decalcifying or rinsing aperture of the boiler is under pressure and must not be opened.

The appliance must not be left unattended while it is connected to the supply mains.

Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use.

The appliance must be used and placed on a flat, stable surface.

When placing the iron on its stand or on its heel, make sure that the surface on which the stand or heel is placed is stable.

EN

The appliance should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water.

With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Keep the appliance and its cord out of reach of children under 8 years of age when it is turned on or cooling down.

This appliance is designed only for household use up to 2000m above sea level.

CAUTION. Hot surface. Surface is liable to get hot during use.

IMPORTANT WARNINGS

Carefully read through the operating instructions for the appliance and safeguard them for future reference.

This appliance has been designed exclusively for normal household use in home environment.

This appliance must be used only for the purposes for which it was designed, i.e. as an iron. Any other use will be considered improper and consequently dangerous. The manufacturer will not be held responsible for any damage arising from misuse or improper use.

This appliance is to be connected and used in accordance with the information stated on its characteristics plate.

This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A and has a socket with an earth connection.

The appliance must never be placed directly under the tap to fill the water tank.

The electrical plug must not be removed from the socket by pulling the cable.

Never immerse the appliance in water or any other liquid.

Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.)

This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns if not used properly.

Do not allow the power cable to come into contact with the soleplate when it is hot.

EUROGAMA SP. Z O. O. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

Before the first use

Before using the Steam Station, please ensure you read the user manual and understand all parts and features of the Steam Station. Be sure to remove any packaging material and labels before using for the first time.

In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and there may be traces of dirt on the soleplate.

USING YOUR APPLIANCE

1. Filling the water tank

Fill the water tank. Remove the water tank from the station and fill it through the water inlet cover. Do NOT fill over the MAX level indicator (11).

Make sure when placing it back to the station that it fits correctly.

Important: Once refilled, press the button (4).

Refill the water tank when the indicator light (4) comes on. Three beeps will be heard.

Water to be used

The device is designed for use with tap water.

Important: Do not use additives!

If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your water supplier to determine the type of water in your area. Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.

2. Heating

1. If your steam station is equipped with an iron lock system (14), release the iron by pressing the button.

2. Unwind the supply hose (6) and the mains cable (7). Plug mains cable into an earthed socket.

3. Turn the programme selector (1) to choose the kind of the fabric to be ironed.

4. Press the button (2) to switch the appliance on. The indicator lights (2, 16) will flash indicating that the appliance is heating up.

5. When the iron is ready to use, the indicator light (2, 16) will remain permanently lit. Two beeps will be heard.

3. Ironing programmes

1. Turn the programme selector (1) to choose the kind of fabric to be ironed.

Programme	Suitable for
AntiShine •	Dark and delicate fabrics. Reduces the risk of shiny marks
••	Silk-Wool
•••	Cotton
Max	Linen
SmartCare	All fabrics can be ironed
Healthy

1. Wait until the indicator lights (2, 16) remain lit permanently. Two beeps will be heard.

"SmartCare" programme

If this program is selected, an appropriate combination of temperature and steam is set, which is suitable for all fabrics that can be ironed (symbols: 📄 🐃 🐃

The “SmartCare” program prevents clothes from being damaged due to an unsuitable temperature being selected.

The "SmartCare" program does not apply to fabrics that cannot be ironed (Symbol). Please, check the garment care label for details or try ironing on a part of the cloth not visible normally.

"Healthy" programme

Suitable for all kind of fabrics and extremely efficient for both thick and delicate garments. The unique combination of temperature and interval provides a sanitizing effect requiring no chemical additives.

1. Place the iron on the garment or fabric you want to disinfect.
2. Continuously press the steam release button (15) to release powerful shots of hygienic steam. Slowly iron the whole garment to enhance the final result.

Note: The energy saving setting "Eco" cannot be activated while the "Healthy" programme is selected.

Note: The “Healthy” programme changes automatically to “SmartCare” after 20 minutes. The change will be indicated by 3 beeps and the indicator lights will flash 5 times. If you want to continue using the “Healthy” programme, you would have to change to another programme by turning the programme selector (1) and then coming back to the “Healthy” programme again.

4. Ironing

1. Press the steam release button (15) for ironing with steam.

Important: When placing the iron on the pad, be sure to first insert the heel in the upper side of the control panel, as shown in the figure.

Tip: For better ironing results, iron the last strokes without pressing the steam release button (15) to dry the garment.

Warning: Ironing with an excessive amount of steam may produce condensation of the hot water and dripping from the ironing board or through any other permeable surface.

"Pulse Steam" function

This appliance has a special function for tackling difficult creases.

1. Press the steam release button (15) two times in quick succession (double-click). Powerful shots of steam will be released.

Vertical steam

Can be used to remove creases from hanging clothes, curtains, etc.

1. Choose the "max" setting by turning the selector (1).
2. Hold the iron in an upright position 15 cm away from the garment to be steamed.
3. Press the steam release button (15) repeatedly with pauses of at least 5 seconds.

Warning: Never point the steam jet at garments being worn, or at people or animals.

5. Energy saving

If the energy saving setting is selected, you can save energy and water and still achieve good results when ironing most of your garments.

1. Press the energy saving button "ECO" (5). The indicator light will come on.
2. To switch back to the normal energy setting, press the "ECO" button again. It is advisable to use the normal energy setting to get optimum results on thick and very wrinkled fabrics.

Tips to help you save energy:

If you tumble dry your fabrics before ironing them, set the tumble drier on the iron dry programme.

Try to iron the fabrics while they are still damp and reduce the steam setting. Steam will be generated from the fabrics rather than the iron.

The most efficient way to iron with steam generators is to use the steam function in a forward direction (the steam permeates the fabric and gives volume back to it) and in a backwards direction without steam (fixing the fabric).

6. Auto switch off

For your safety and to save energy, the appliance switches off automatically when it has not been used for 8 minutes.

Three beeps will be heard, and all indicator lights (2,3,4,5) will flash.

1. To switch the steam station back on, press the steam release button (15) again.

CLEANING & MAINTENANCE

1. Descaling process

This appliance is equipped with an automatic clean warning indicator, which indicates that scale particles must be removed from inside the steam chamber.

When activated, three beeps will be heard and the "Calc'nClean" indicator light (1) will flash, indicating that the process should be performed.

You may continue ironing for a time. Once this time has passed, you will only be able to dry iron (without steam).

To start steam ironing again, follow this descaling process:

Descaling the boiler

1. Take special care to ensure that the appliance is cold and unplugged.
2. Empty the water tank.
3. Remove the iron from the pad (13).
4. Unscrew and remove the boiler cap (9) and take it out. Empty the boiler completely.
5. Fill the boiler with approximately 300ml of tap water. Close the boiler cap and shake the base unit for a few moments. Then, empty it completely.

Important: To obtain the best result, we recommend that this operation is being performed twice. Before re-closing, make sure no water remains in the boiler.

1. If your appliance is equipped with limescale collector (9), it must be washed (see the “Descaling the scale collector” section).

2. Replace and tighten up the cap.

EN

Descaling the limescale collector\*

1. Place the limescale collector (9*) under the water tap.
2. Wash it up until limescale residues are removed.

Descaling the iron

1. Fill the tank (7) with water.
2. Plug in the mains cable (5) and press the button (2) to switch the appliance on.
3. Press the descaling button (3) for 2 seconds. Its indicator light will remain permanently lit.
4. Wait until the indicator light (2) stops flashing and remains lit permanently. Two beeps will be heard. Hold the iron in a horizontal position over an empty sink to collect the water.

Warnings:

Boiling water and steam will be released through the soleplate, removing limescale and/or deposits that may be inside.

1. Press the steam release button (15) for 2 seconds. The descaling process will start automatically. During this process, short beeps will be heard.
2. After approximately 3 minutes, the iron will stop releasing steam. A long beep will be heard, indicating that descaling process has finished. The appliance will switch off automatically.
3. To clean the soleplate (17), immediately rub off any residue by running the hot iron over a wet cotton cloth. Wipe the housing of the iron with a cloth.

2. Cleaning the appliance

Regularly clean your appliance for properly maintenance.

Attention! Burn risk!

1. If the appliance is only slightly soiled, wipe it with a damp cotton cloth only, and then dry it.
2. If the cloth is synthetic it may melt due to the high temperature on the soleplate. Switch the steam off and rub off any residue immediately with a thickly folded, damp cotton cloth.
3. To keep the soleplate smooth, you should avoid contact with hard metal objects. Never use a scouring pad, or chemicals to clean the soleplate.

3. Storing the appliance.

1. Unplug the appliance and let it cool down. Empty the water tank (10).
2. Place the iron on the steam station, standing on the pad (13).
3. Store the mains cable and the supply hose in the storage fixing (8). Do not wrap the cords too tight.

Troubleshooting

Problem	Possible cause	Solution
The iron begins to smoke when switched on.	During first use: certain components on the appliance have been lightly greased at the factory and may produce a small amount of smoke when initially heated.	This is completely normal and will stop after a short while.
	During subsequent use: the soleplate may be soiled.	Clean the soleplate according to the cleaning instructions in this manual.
Water runs out of the holes in the soleplate.	Water has condensed in the pipes because you are using for the first time or you have not used it for some time.	Press the steam trigger away from your ironing board until the iron produces steam.
Dirt comes out through the soleplate.	There is a build-up of lime scale or minerals in the iron.	Carry out a cleaning cycle (see the “Descaling process” section).
	Chemical products or additives have been used.	Never add products to the water (see the “Filling the water tank” section). Clean the soleplate with a damp cloth.
The “Calc'nClean” indicator light (3) does not turn off.	The iron descaling process has been stopped before being completed.	Restart and complete the iron descaling process.
The soleplate is dirty or brown and may stain the garment. The clothe sticks in the soleplate.	You are ironing at too high a temperature.	Adjust the temperature dial to a lower heat setting.
The appliance makes a pumping sound.	Water is being pumped into the iron.	This is normal.
Loss of pressure during ironing.	The steam release button has been activated for a too long period of time, meaning it has been pressed too frequently.	Use the steam release button at intervals.
Water spots appear on the garment during ironing.	May be caused by steam condensed on the ironing board.	Wipe the textile cover of the ironing boards, and iron any water drops to dry them.
The hose gets hot during use.	This is normal. It is caused by the steam passing through the hose during steam ironing.	Place the hose on the opposite side so that you do not touch the hose during ironing.
Water leakage from the boiler.	Boiler cap (9) is loose.	Tighten the cap.
The “Water tank empty” indicator light (4) comes on.	The water tank is empty or not correctly fitted onto the appliance.	Fill the water tank or fit it correctly.

If the above tips do not solve the problem, get in touch with our customer service.

ADVICE ON DISPOSAL

Our goods come in optimized packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials. Your local town council can give you information about how to dispose of obsolete appliances.

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.

We hope that you will be satisfied with this product.

WIR MÖCHTEN UNS BEI IHNEN BEDANKEN, DASS SIE SICH FÜR ZELMER ENTSCHIEDEN HABEN. WIR HOFFEN, DASS DAS PRODUKT ZU IHRER ZUFRIEDENHEIT UND IHREM VERGNÜGEN FUNKTIONIERT.

ACHTUNG

EUROGAMA Sp. Z o.o. guarantees compliance of this product for the use for which it is intended for a period of three years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by EUROGAMA Sp. Z o.o.. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a EUROGAMA Sp. Z o.o. authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by EUROGAMA Sp. Z o.o., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty. This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com

GARANTIE-ERKLÄRUNG