TRA-130D+ - Radio ROADSTAR - Free user manual and instructions

Product type	Portable DAB+/FM radio
Brand	Roadstar
Model	TRA-130D+
Power supply	Built-in lithium battery, rechargeable via USB (5V)
Main functions	DAB/DAB+ and FM reception, 10 DAB presets and 10 FM presets, Sleep timer, Information display (Radio text, PTY, frequency, bit rate, etc.)
Antenna	Telescopic antenna for better reception
Speaker	Built-in
Headphone jack	3.5 mm jack output
Included accessories	USB charging cable
DAB frequency range	Band III 174.928 - 239.200 MHz
FM frequency range	87.5 - 108 MHz
Maintenance and cleaning	Clean with a dry cloth only
Safety	Do not open, avoid moisture and high temperatures, use specified voltage
Spare parts and repairability	No user-serviceable parts, contact a qualified technician
General information	Compliant with directive 2014/53/EU

Frequently Asked Questions - TRA-130D+ ROADSTAR

How to recharge the radio battery?

Connect the micro USB cable to the port on the back of the radio, then plug the other end into a 5V power source. The red LED indicates charging. When the radio is turned off, the LED turns green once charging is complete.

How to switch between DAB and FM modes?

Press the Power/Mode button (2) to toggle between DAB and FM sources.

How to save a station as a preset?

Set the desired station, press Preset (4), choose a number with CH -/+ (8/9), then hold down Enter (5) until 'Saved' appears.

How to set the sleep timer?

Hold down Info/Sleep (3) to access the menu. Use CH -/+ to select 15, 30, 45, 60, 90 minutes or OFF. Confirm with Enter (5).

What to do if the screen shows 'No DAB Service'?

Press and hold Scan/Preset (4) to start an automatic scan of available DAB stations.

How to check the battery level?

Turn on the radio and press Info/Sleep (3) repeatedly until the battery icon appears at the bottom of the screen.

How to clean the radio?

Use a dry, soft cloth. Avoid liquids and abrasive products.

Can I open the radio to repair it?

No. Never open the casing. Contact a qualified technician for any repairs. The device contains no user-serviceable parts.

How to improve FM or DAB reception?

Extend and orient the telescopic antenna (11) for the best possible reception.

How to reset the radio to factory settings?

Turn off the radio, then simultaneously hold down the Power/Mode (2) and Scan/Preset (4) buttons until the screen displays 'RESET System'.

USER MANUAL TRA-130D+ ROADSTAR

- Your new unit was manufactured and assembled under strict ROADSTAR quality control. Thank-you for purchasing our product for your music enjoyment. Before operating the unit, please read this instruction manual carefully. Keep it also handy for further future references.

BACK

1 English

LOCATION OF CONTROLS

1. LCD DISPLAY

2. POWER ON - OFF / MODE

• PRESS BRIEFLY TO POWER ON
• PRESS AND HOLD TO POWER OFF
• WHEN THE RADIO IS ON, PRESS TO SELECT BETWEEN DAB AND FM

3. INFO / SLEEP

• PRESS REPEATEDLY TO VIEW VARIOUS INFO
• PRESS AND HOLD TO ENTER THE SETTING OF SLEEP TIMER

4. SCAN / PRESET

• PRESS AND HOLD TO START THE RADIO SCAN
• PRESS TO ENTER PRESET MENU

5. ENTER

1. VOLUME -
2. VOLUME +
3. CHANNEL -
4. CHANNEL +
5. SPEAKER
6. ANTENNA
7. USB CHARGING PORT (FOR CHARGING BUILT-IN BATTERY)
8. LED INDICATOR (FOR BATTERY CHARGING)
9. EARPHONE OUT

PRECAUTIONS

• The radio should not be used in a high temperature or high humidity environment over prolonged periods of time as this may damage the unit.
• Keep the radio away from liquids as it may get damaged. Please switch off the radio immediately if water or liquids is spilled into the radio. Consult with the shop you bought this radio for any question.
• Avoid using or storing the unit in dusty or sandy environment.
• Do not open and repair the radio by yourself.
• Use only the specified power input voltage to charge the battery. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous.
  • Clean only with dry cloth.

CHARGING BATTERY

The radio is powered by the built-in lithium battery. (An USB charging cable is supplied in the product package).

To check the battery level, when the radio is on, press repeatedly the [Info/Sleep] button (3) until you see the battery indicator on the bottom right of the display.

When battery power is low, it will prompt with message “Battery Low” to remind for battery charging.

To charge the battery, connect the micro USB plug to the port (12) at the rear side of the radio, connect the other end to a power source supplied with 5V OUT.

The LED (13) will light up in red indicates the battery is charging.

Note: If the radio is in OFF mode while charging, the LED (13) will turn to green when charging is done.

If the radio is ON when charging, the LED (13) remains red even charging is completed. Please check the battery indicator to see the status of charging.

TO USE THE RADIO

1. Press the [Power/Mode] button (2) to power on;
2. (The first time you power on the radio, the radio will scan the DAB radio stations automatically. It will display and play the first station after the scan is done);
3. Select the band (DAB or FM) by pressing the [Power/Mode] button (2);
4. Adjust radio frequency to your desired station by pressing [CH -/+] buttons (8/9);
5. Adjust the volume with the [VOL +/-] buttons (6/7) to the desired level;
6. To power off the radio, press and hold the [Power/Mode] button (2).

Note: For a better reception reorient the antenna (11).

TUNE DAB STATION

- To select the desired radio station press repeatedly the [CH -/+] button (8/9). Note: In case the display shows “No DAB Service”, press & hold the [Scan/Preset] button (4) to start scanning.

FM STATION SCAN

• Use the [CH +/-] buttons (8/9) to fine tune the frequency in a step of 0.05 MHz.
• Press and hold the [Scan/Preset] button (4) to scan the next available station.

PRESET

There are 10 presets available for DAB and 10 presets for FM.

1. Set the desired radio station frequency as explained previously;
2. Press the [Preset] button (4) and it will display "Preset 1 unset";
3. Choose the number of preset by pressing [CH -/+] button (8/9);
4. Press & hold the [Enter] button (5) until the display shows "Saved".

RECALL A PRESET STATION

1. Press the [Preset] button (4);
2. Select the desired preset by pressing [CH -/+] button (8/9);
3. Confirm with the [Enter] button (5).

INFO

When the radio station is playing, press the [Info/Sleep] button (3) repeatedly to cycle through the information broadcasted by the radio as follow:

UNDER DAB

• DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station such as the news, songs being played...etc.
• PTY (Programme Type): shows which type of programme you are listening to, "Music", "Talk", "News" etc. If there is no information, it will display "Programme Type".
• Channel/Frequency: The frequency of DAB is displayed such as “11C 220.352MHz”.
  • Audio info: The display shows the digital audio bit rate of the current reception.
• Signal error: The signal strength is displayed graphically.
• Time/Date: The time and date are set automatically.
• Software version

UNDER FM

• RT (Radio text): Text broadcasted from the FM station
• Signal error: The signal strength is displayed graphically.
• Time/Date: The time and date are set automatically.
• Frequency: the FM frequency for the radio station in playing.
  • Auto / Stereo: Automatic switching between mono and stereo reception.

Note: The time and date accuracy depends on the info broadcasted from the radio station.

SLEEP TIMER

The sleep timer switches the radio off automatically after an adjustable time.

1. Long pressing the [Info/Sleep] button (3) will enter the Sleep timer setting with options 15/30/45/60/90/OFF;
2. Press the [CH -/+] button (8/9) to choose the timer;
3. Press [Enter] button (5) to confirm.

The timer will display on the top right corner of the display. If 15 minutes is set, it will display S15 and the radio will switch off automatically after 15 minutes.

CANCEL SLEEP TIMER

1. Long pressing the [Info/Sleep] button (3) will enter the Sleep timer setting;
2. Press the [CH -/+] button (8/9) to choose OFF;
3. Press [Enter] button (5) to confirm.

FACTORY RESET

1. Power off the radio;
2. Hold the [Power/Mode] (2) and [Scan/Preset] (4) together until the display is lit and show "RESET System";
3. Release both buttons. The radio will reboot and scan DAB stations.

TECNICAL SPECIFICATIONS

Power Input: DC 5 V = 1 A.

Battery: Lithium Battery 1200mAh.

Radio Frequency Coverage

DAB+ / DAB:

BAND III 174.928MHz - 239.200MHz.

FM:

87.5 - 108 MHz.

Speaker

Output Power: 1 x 2 Wrms

General

Earphone Out: 3.5mm jack plug.

Accessories:

USB Charging Cable.

Specifications and design are subject to possible modifications without notice due to improvement.

WARNINGS

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.

To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside the unit. Refer all servicing to qualified personnel.

This unit operates on 230V \~ 50Hz. If the unit is not used for a long period of time, remove the plug from the AC mains.

Ensure all connections are properly made before operating the unit.

This unit must not be exposed to moisture or rain.

This unit should be positioned so that it is properly ventilated. Avoid placing it, for example, close to curtains, on the carpet or in a built-in installation such as a bookcase.

Do not expose this unit to direct sunlight or heat radiating sources.

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

ORT DER BEDIENELEMENTE

1. LCD-ANZEIGE

2. POWER ON-OFF / MODE (POWER EIN-AUS / MODUS)

Simple line drawing of a trash bin with two crossed lines above and below, no text or symbols present.

KORREKTE ENTSORGUNG DIESES PRODUKTS (Elektromüll)

Power Input: DC 5 V = 1 A.

Batterie: Batterie au lithium 1200mAh.

Puissance: 1 x 2 Wrms.

Général

Simple line drawing of a trash bin with two crossed lines and a black bar at the bottom (no text or symbols)

COMMENT ÉLIMINER CE PRODUIT

Simple line drawing of a trash bin with two crossed lines and a solid black bar below (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a solid black bar below (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

CORRECTE AFVALVERWERKING VAN HET PRODUCT (elektrisch en elektronisch afval)

Hereby, Roadstar Management SA declares that the radio equipment type TRA-130D+ is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

http://roadstar.com/images/ce/TRA-130D+.pdf

or by scanning the following QR Code.

http://roadstar.com/images/ce/TRA-130D+.pdf

http://roadstar.com/images/ce/TRA-130D+.pdf

http://roadstar.com/images/ce/TRA-130D+.pdf

http://roadstar.com/images/ce/TRA-130D+.pdf

http://roadstar.com/images/ce/TRA-130D+.pdf

VER.1

06.2018

Roadstar Management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)