IAN 110443 - Lighting Livarno Lux - Free user manual and instructions
Find the device manual for free IAN 110443 Livarno Lux in PDF.
User questions about IAN 110443 Livarno Lux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lighting in PDF format for free! Find your manual IAN 110443 - Livarno Lux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 110443 by Livarno Lux.
USER MANUAL IAN 110443 Livarno Lux
natural_image
Exterior view of a mechanical device with glass and metallic components (no visible text or symbols)LED-SOLARLEUCHTE

B M D
Before reading, unfold the page containing illustrations and familiarise yourself with all functions of the device.

UNI-ELEKTRA GMBH
Krichan 48
72145 Härgen
Deutschland
Stand der Informationen - Version des informations Versione delle informazioni - Last Information Update: 01/2015 Idere, No.: 10194032014 DE/AT/CH/TR/IT/CB
DE AI CH
LED-SOLARLEUCHTE
Operation and Safety Notes
GB Operation and Safety Notes Page 21
IAN 1104 43 IAN 1104 43

DE ATCH

text_image
Technical diagram of a mechanical device with numbered components for identification
text_image
A 12
natural_image
3D diagram of a mechanical device with labeled parts (no text or symbols present)
text_image
C O+ PHCO 8 9 10Inhalt
Einleitung 6
(5000-6000K) circa 60
Lumen (PIR), circa 15 Lumen (ECO)
Cleaning and Care 24
Disposal 24
Warranty and Service 25
Declaration of conformity C€ 25
LED Solar light
●Introduction

Congratulations on the purchase of your new device. You have bought a quality product. These operating instructions are part of this product. They contain important information regarding safety, use and disposal. Please familiarise yourself with all operational and safety notes prior to using your product. Use the product only in the manner as described and for the areas of application as stated. When passing the product to a third party be sure to also supply all papers.
Intended use
This product is only suitable as outdoor lighting for private use. Other uses or changes to the product constitute improper use and carry serious risks of accidents. The manufacturer is not liable for any damages due to improper use. The product is not intended for commercial use.
●Technical Data
Model: 10278A
LEDs: 3 x SMD LG5630 (patented), 0.5 W white LED (5000-6000K) ca. 60 Lumen (PIR), ca. 15 Lumen (ECO)
Battery type: 1 x 1400 mAh, 1.2 V, AA type Ni-MH battery (included)
Solar panel: polycrystalline 0.6 W with twilight feature
Light on period PIR: 90 seconds after last motion detection
Light on period
ECO: ca. 8 hours with reduced light intensity
Range: approx. 5–12 m
Detection range: approx. 120°
Material: Stainless steel 201
Plastic (PC and ABS)
Protection rating: IP44
●Parts description
1 Solar panel
2 Spotlight head
3 LED-cover
4 Mounting plate
5 Reflector
6 Spotlight cover
7 Motion sensor
8 ECO/OFF/PIR switch
9 LEDs
10 Battery compartment
11 Screws
12 Rawlplugs
- Scope of delivery
1 LED Solar light
2 Screws
2 Rawlplugs
1 Instructions for use

Safety notes
Please read all the safety information and instructions. Failure to observe the safety information and instructions can result in electric shock, fire and / or serious injury. The manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty is voided.
PLEASE KEEP ALL SAFETY INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!
RISK OF WARNING! FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN!
Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material. This product is not a toy.
Children or persons lacking knowledge or experience in handling the device or have limited physical, sensory or mental abilities, must not use the device without supervision or instruction by a person responsible for their safety. Children must be supervised at all times to prevent them from playing with the device.
CAUTION! DANGER OF INJURY!
Please do not use this device if you find that it is damaged in any way.
■Verify all parts are correctly installed. Incorrect assembly could lead to injury.
■The LEDs cannot be interchanged.
■When opening the top, please make sure you hold the spurts so they will not turn with the top.
This product is treated with a special anti-corrosion coating. Please make sure you treat it carefully and do not scratch the housing to prevent corrosion.

Safety instructions for rechargeable batteries
A N G E R N I O G I F E!
Rechargeable batteries are not intended to be in the hands of children. Do not leave batteries lying around. They may otherwise be swallowed by children or pets. If accidentally swallowed seek immediate medical attention.

EXPLOSION HAZARD! Never
short-circuit and/or open rechargeable batteries. The battery may overheat, ignite or explode. Never throw rechargeable batteries into fire or water. The batteries could explode.
■Regularly check rechargeable batteries for leaks.
■Skin contact with leaking or damaged rechargeable batteries could cause chemical burns; in this case therefore always wear suitable safety gloves!
When inserting the battery ensure the correct polarity! The correct polarity is shown inside the battery compartment. The rechargeable batteries could otherwise explode.
●Assembly
■ Only optional personnel may perform the installation.
■ Make water, water, or power lines are not located in the drilling area of the wall.
- Select a suitable place for installation
Ensure that
- the motion detector will not be functionally inhibited at the desired place of installation due to obstacles or constantly moving objects.
- the light is mounted in a place with direct sunlight.
- the spotlight is not installed where there are strong temperature fluctuations, e.g. due to heating devices.
- the spotlight is installed far away from unnatural light sources and in southern direction.
- the supplied screws and rawlplugs are suitable for the type of wall. If not, use other suitable screws and rawlplugs. The manufacturer is not responsible for improper use of wall connections.
●Mounting the light
Ensure that
- the light is placed with the spotlight head upwards. Do not install the spotlight in any other position.
☐Secure the light to a stable and solid surface according to the instruction in figure A.
- Initial use
Note: the rechargeable battery is always factory installed.
☐To achieve a long battery life, fully charge the rechargeable battery in OFF mode (approx. 3x8 hours in summer).
☐Then fully discharge the rechargeable battery, (turn on PIR mode approx. 35 x 90 seconds).
☐Repeat this process once or twice.
☐If the product has not been used for more than 6 months please repeat this process
Use
☐The light features three settings (see Figure C): ECO: Permanent light.
OFF: Light always off
PIR: Motion detector controls the light
In „ECO“ the light switch on at twilight. The light is on with reduced light intensity. The light switch off after 8 hours (by full charged battery).
☐ In „OFF“ the light is off, but the solar panel is still charging.
In „PIR“ the light will switch on if the surroundings are very dimly lit and motion is detected (infrared sensor). The light will automatically switch off after 90 seconds if motion is no longer detected.
Attention: a light sensor is located inside the solar panel on top of the light. The panel must therefore be mounted far away from artificial light sources.
Note: when the light is put from the OFF-position to the PIR-position, it takes 5 seconds before the PIR setting is activated.
●Maintenance
●Changing the battery
☐Change the battery according to the instructions in figure B and C.
●Troubleshooting
☐This product contains delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. This could be, for example, mobile telephones, walkie talkies, CB radios, remote controls and microwaves. If interference occurs, move such objects away from the appliance.
☐Electrostatic discharges can lead to malfunctions. In the event of such malfunctions briefly remove and reinsert the rechargeable batteries.
●Cleaning and Care
■Never use cleaners or a rough cloth. These could dame the motion sensor.
■Clean the product with a dry, lint-free cloth.
■Make sure the solar cell is free of dirt and free of snow and ice in winter. Otherwise the performance of the solar panel will diminish.
●Disposal

The packaging is made of environmentally friendly materials, which may be disposed through your local recycling facilities.
Do not dispose of used and/ or defective modules with household waste! Dispose of these items in a collection centre provided by your local council.

Do not dispose of electrical equipment in the household waste!
In accordance with European Directive 2012/19/EC relating to old electrical and electronic appliances and its translation into national law, used electrical equipment must be collected separately and recycled in an ecologically compatible way.
If you wish to part with the product, please dispose of it in accordance with the regulations applicable at such time. Advice is available from your local council.

Environmental damage through incorrect disposal of the rechargeable batteries!
Rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
●Warranty and Service
This product has a 3 year guarantee from the date of purchase extended only to the original buyer, not transferable. Please keep your receipt as proof of purchase. The guarantee applies to material or manufacturing defects only. It does not cover wear items or damage caused by improper use. Any modifications will void the guarantee. This warranty does not limit your legal rights. In the event of a warranty claim, please contact the service centre. This is the only way to return your product free of charge.
●Service address
Please contact us before returning the defective product. We will gladly also call you back! The guarantee will only be honoured if the defective device is accompanied by a copy of the receipt. We cannot accept parcels sent carriage forward, please request a return label.
Uni-Elektra GmbH
Kirchstr. 48
72145 Hirrlingen
Germany
Tel.: +49 (0) 74 78 / 9 13 85-0
E-Mail: service@uni-elektra.de
IAN 110443
Please have your receipt and product number (e.g. IAN 12345) ready as your proof of purchase when making enquiries.
Manufacturer
Uni-Elektra GmbH
Kirchstr. 48
72145 Hirrlingen
Germany
●Declaration of conformity €
This product conforms to the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.