IAN 275315 - Lighting Livarno Lux - Free user manual and instructions

Product Type	Table lamp
Brand	Livarno Lux
Model	IAN 275315 / Item No. 14111402L or 14111302L
Operating Voltage	230-240 V~, 50 Hz
Rated Power	1 x max. 42 W
Lamp Socket	E14
Protection Class	II
Protection Type	IP20 (suitable for indoor use only)
Dimensions (14111402L)	∅ 10 x 24 cm
Dimensions (14111302L)	10 x 10 x 24 cm (W x L x H)
Dimmer	Touch dimmer with 3 brightness settings
Use	Indoor, dry enclosed spaces
Warranty	36 months
Scope of Delivery	Table lamp, glass shade, instructions
Maintenance	Clean with dry, lint-free cloth; do not use water or solvents
Safety Notes	Do not use with external dimmers; do not cover; do not look directly into light source

Frequently Asked Questions - IAN 275315 Livarno Lux

How do I assemble the Livarno Lux table lamp?

Loosen the threaded ring and remove the retaining ring from the lamp socket. Place the glass shade over the socket and fasten with the threaded ring and retaining ring. Screw the bulb (E14, max 42W) into the socket clockwise. Plug into a properly installed socket.

How do I operate the dimmer function?

Touch the lamp base to switch the light on or off. Touch the lamp base multiple times to cycle through three brightness settings.

How do I replace the bulb?

First unplug the lamp from the mains and allow it to cool completely. Unscrew the defective bulb counter-clockwise. Screw a new E14 bulb (max 42W) clockwise into the socket. Use a dry, lint-free cloth when handling the bulb.

Can I use this lamp with an external dimmer?

No, the lamp is not suitable for external dimmers or electronic switches. Use only the integrated touch dimmer.

How should I clean the lamp?

Always unplug the lamp first and allow it to cool. Clean only with a dry, lint-free cloth. Do not use water, solvents, or other liquids.

What is the warranty period and how do I claim?

The lamp comes with a 36-month warranty from the date of purchase. In case of defects, send the lamp to the listed Service Centre with the item number (14111402L or 14111302L) and proof of purchase. Wear parts like bulbs are excluded.

Can I use this lamp outdoors?

No, the lamp is only suitable for indoor use in dry, enclosed spaces. It has an IP20 rating, meaning it is not protected against water.

What should I do if the lamp stops working?

Check the mains plug and socket. Verify the bulb is screwed in correctly. If the problem persists, contact the service centre. Do not attempt to repair the lamp yourself.

How do I dispose of the lamp?

Do not dispose of it with household waste. Take it to a recycling centre for electrical and electronic appliances. Dispose of packaging materials via your local recycling facility.

Can children use this lamp?

Children aged 8 years and up can use the lamp under supervision. Children must not play with the lamp or perform cleaning and maintenance without supervision. Keep packaging materials away from children.

USER MANUAL IAN 275315 Livarno Lux

Operation and Safety Notes

IAN 275315

GB IE

Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device.

A

14111302L

graph TD
    A["1 Light Bulb"] --> B["2 Glowed Bulb"]
    B --> C["3 Glowed Bulb"]
    C --> D["4 Lighted Bulb"]
    D --> E["5 Lighted Bulb"]
    E --> F["6 Light Bulb with Arrow"]
    F --> G["7 Cable Connection"]

A

14111402L

B

graph LR
    1["Light Bulb 1"] --> 2["Light Bulb 2"]
    2 --> 3["Light Bulb 3"]
    3 --> 4["Light Bulb 4"]
    4 --> 5["Light Bulb 5"]

List of pictograms used....Page 6

Introduction......Page 6

Intended use....Page 6

Scope of delivery....Page 6

Parts Description......Page 7

Technical Data Page 7

Safety Page 7

Safety notices Page 7

Initial use....Page 8

Assembling the light....Page 8

Switching the light on/off/dimming....Page 8

Replacing the bulb....Page 8

Maintenance and Cleaning....Page 8

Disposal Page 8

Warranty and Service......Page 9

Warranty Page 9

Service address....Page 9

Declaration of conformity....Page 9

Manufacturer....Page 9

List of pictograms used
	Read the instructions!		Danger to life and risk of accident for infants and children!
	This light is only suitable for indoor use in dry and enclosed spaces.		Caution - Risk of electric shock!Danger to life!
	Volt (AC)		This light is not suitable for external dimmer and electronic switches.
	Hertz (mains frequency) Safe working
	Watt (effective power) Caution! Danger	ns!
	Safety class II		Dispose of packaging and device in an environmentally-friendly way!
	Observe the warning and safety instructions!

Table lamp

- Introduction

Congratulations on your new product. You have selected a high quality product. The instructions for use are a part of the prod-

uct. They contain important information about safety, use and disposal. Before using the product, please familiarise yourself with all the operating and safety instructions. Only use the product as described and for the indicated purpose. When passing this product on to others, please be sure to include all its documentation. Before using this product for the first time verify the correct voltage and that all parts are properly installed.

- Intended use

This light is only suitable for indoor use in dry and enclosed spaces.

This product is intended for private household use only.

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 Table lamp
1 Glass shade
1 Instructions for use

Parts Description

1 Threaded ring
2 Retaining ring
3 Lamp glass
4 Lamp socket
5 Mains plug
6 Illuminant
7 Lamp base

- Technical Data

Item no.: 14111402L or 14111302L

Operating voltage: 230-240 V\~, 50 Hz

Rated power: 1 x max. 42 W

Lamp socket: E14

Protection class: II/

Protection type: IP20

Dimensions: 14111402L = ∅ 10 x

height 24 cm

$$ 1 4 1 1 1 3 0 2 \mathrm{L} = 1 0 \times 1 0 \times $$

$$ 2 4 \mathrm{cm} (\mathrm{w} \times \mathrm{l} \times \mathrm{h}) $$

- Safety

Safety notices

Damage due to failure to comply with these operating instructions will invalidate the warranty! We assume no liability for consequential damage! We assume no liability for material damage or personal injury due to improper handling or failure to comply with the safety instructions!

WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZ-ARD FOR TODDLERS AND SMALL

CHILDREN! Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers.

This device may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities,

or lacking experience and/or knowledge, when supervised or instructed in the safe use of the device and they understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be performed by children without supervision.

RISK OF INJURY! Do not leave the lamp or packaging material lying unattended. Plastic film or bags, Styrofoam etc. can become dangerous toys for children.

Avoid the risk of fatal injury from electric shock

■ Always check the mains plug for damage before connecting the light to the mains. Never use the light if it shows any signs of damage.
In the event of damage, repairs or other problems with the light, please contact the service centre or an electrician.
- Ensure that the light does not come into contact with water or other liquids under any circumstances.
- Never open or insert anything into electrical fittings or equipment (e.g. switches, fitting socket). This will pose a risk of fatal injury from electric shock.
■ Only touch the insulated area of the mains plug when connecting to or disconnecting from the mains!
The flexible outer cable is not replaceable; if the cable is damaged, the lamp must be disposed of.
Before every use, verify the available mains voltage matches the required operating voltage of the light (230-240 Volt \~).
■ Always unplug the mains plug, respectively, from the mains prior to assembly, disassembly, cleaning, or when the light will not be used for extended periods.

This light is not suitable for external dimmer and electronic switches.

Safe working

■ Position the lamp so it is protected from moisture and dirt.
■ Always be attentive! Always pay attention to what you are doing and use common sense.
Do not cover the lamp with objects. Excessive heat can result in fire.
Do not look into the illuminant from a close distance during operation.
Do not use optical instruments to look at the illuminant.

- Initial use

- Assembling the light

☐ Loosen the threaded ring 1 and remove the retaining ring 2 from the lamp socket 4.
Place the glass shade 3 over the lamp socket 4 and fasten with the threaded ring 1 and the retaining ring 2 (see Fig. A).

Be sure it is correctly positioned.

☐ Screw the illuminant 6 clockwise into the lamp socket 4 (see Fig. B).
☐ Plug the mains plug 5 into a properly installed socket.

Your light is now ready to use.

- Switching the light on/off/dimming

Note: The light has three dimmer settings.

☐ Touch the lamp base 7 to switch the light on or off (see Fig. B).
☐ Touch the lamp base 7 multiple times to select the desired brightness (see Fig. B).

● Replacing the bulb

CAUTION! RISK OF ELECTRIC SHOCK!

First unplug the mains plug 5 from the socket.

CAUTION! DANGER OF BURN INJURIES!

Allow the lamp to cool down completely.

☐ Use a clean, lint-free, dry cloth when replacing the illuminant 6.
□ Unscrew the defective illuminant 6 from the lamp socket 4, turning counter-clockwise.
☐ Screw a new illuminant, E14 max. 42 W, clockwise into the lamp socket 4.
☐ Plug the mains plug 5 into a properly installed socket.

Your light is now ready to use.

● Maintenance and Cleaning

CAUTION! RISK OF ELECTRIC SHOCK!

First remove the mains plug from the socket.

CAUTION! DANGER OF BURN INJURIES!

Allow the lamp to cool down completely.

CAUTION! RISK OF ELECTRIC SHOCK!

For electrical safety, never clean the light with water or other liquids, or immerse it in water.

• Do not use solvents, benzene or similar substances. They could damage the light.
  ☐ Unplug the mains plug 5 from the socket.
  ☐ Only use a dry, lint-free cloth for cleaning.
  ☐ Plug the mains plug 5 into a properly installed socket.

- Disposal

The package and packaging materials consist entirely of environmentally friendly materials. They can be disposed of at your local recycling facility.

The symbol of the wheelie bin with the line through it means that, in the European Union, the product has to be disposed

of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Do not dispose of products bearing this symbol in your normal household waste, but instead they must be taken for recycling to a collection site for

electrical and electronic appliances. Recycling helps to reduce the consumption of raw materials and protects the environment.

● Warranty and Service

Warranty

You receive a 36 month warranty on this product, valid from the date of purchase. The appliance has been carefully produced under strict quality control. Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect during the warranty period, please send the appliance to the listed Service Centre address, referencing the following item number: 14111402L or 14111302L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty. The performance of services under the warranty does not extend or renew the warranty period.

Serviceaddress

Please have your receipt and the item number (e.g. IAN 12345) ready as your proof of purchase when enquiring about your product.

Declaration of conformity CE

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer

59929 Brilon (Germany)

Last Information Update: 04 / 2016

Ident.-No.: 14111402L/14111302L042016-GB/IE