IAN 37695 - Lighting Livarno Lux - Free user manual and instructions

Product Type	LED Lamp Set
Brand	Livarno Lux
Model	IAN 37695
Number of Lamps in Set	3
Light Source	4 LEDs per lamp (non-replaceable, 0.4 W each)
Total Power Consumption	1.2 W (3 x 0.4 W)
Battery Type	3 x 1.5 V AAA batteries per lamp
Batteries Included	Yes, 9 AAA batteries
Mounting Method	Self-adhesive pad on battery compartment cover
Operation	Press center of lamp to switch on/off
Intended Use	Indoor, dry, private domestic rooms
Safety Features	LED radiation warning (do not look into beam), battery safety (keep away from children)
Battery Installation	Turn battery compartment cover anticlockwise to open, insert batteries with correct polarity
Cleaning Instructions	Use a dry cloth; avoid petrol, solvents, or plastic-damaging cleaners
Disposal Instructions	Dispose of product and batteries at local recycling facilities; do not dispose in household waste
Certification	CE marked
Troubleshooting	Keep away from radio transmitters (e.g., mobile phones); remove batteries briefly if device fails
Package Contents	3 LED lamps, 9 AAA batteries, installation instructions

Frequently Asked Questions - IAN 37695 Livarno Lux

How do I install the Livarno Lux LED lamp?

Peel off the protective film from the self-adhesive pad on the battery compartment cover, then attach the lamp to a dry, smooth, dust-free surface. Do not remove the pad for the first 24 hours to ensure adhesion.

How do I insert or replace the batteries?

Turn the battery compartment cover anticlockwise and remove it. Insert three AAA 1.5V batteries with correct polarity (shown inside the compartment). Replace the cover and turn clockwise to tighten. Ensure the lamp is switched off before replacing batteries.

How do I turn the lamp on or off?

Simply press the center of the lamp to switch it on or off.

Can I replace the LED bulbs?

No, the LED bulbs cannot be replaced. They are built into the lamp and are non-serviceable.

Is the lamp waterproof or suitable for outdoor use?

No, the lamp is intended only for indoor use in dry, enclosed areas. Do not expose it to humidity or outdoor conditions.

What batteries does the lamp use?

Each lamp requires 3 x AAA 1.5V batteries. The set includes 9 batteries (enough for all three lamps). Use only batteries of the same type and replace all at once.

How do I clean the lamp?

Use a dry cloth to clean the lamp. For stubborn dirt, use a slightly damp cloth. Avoid petrol, solvents, or cleaners that attack plastic.

What should I do if the lamp stops working?

First, check if the batteries are inserted correctly and are not depleted. If the lamp still fails, remove the batteries for a short time and then reinsert them. Keep the lamp away from devices that transmit radio signals (e.g., mobile phones) as they may cause interference.

How should I dispose of the lamp and batteries?

Do not dispose of the product or batteries in household waste. Take them to a local recycling facility. Defective or used batteries must be recycled according to Directive 2006/66/EC.

Is the lamp safe for children?

The lamp is not a toy. Keep children away from packaging material (suffocation risk) and supervise children if they use the lamp. Do not let children play with the lamp and keep batteries out of their reach.

USER MANUAL IAN 37695 Livarno Lux

Operation and Safety Notes

FI

LED-vaLosarja

GB / IE Operation and Safety Notes Page 4

Diagram of a spiral-shaped object with concentric rings and directional arrows, labeled 'A' in top-left corner (no text or symbols on the object itself)

Table of Contents

Introduction

Intended Use Page 5

Description of parts....Page 5

Technical data....Page 5

Includes......Page 5

General Safety Instructions

Battery Safety Instructions......Page 6

Bringing into use

Inserting / replacing the batteries....Page 7

Installing the light Page 7

Switching On/Off......Page 7

Troubleshooting Page 8

Cleaning and care....Page 8

Disposal Page 8

LED Lamps

- Introduction

The instructions for use are to be considered as part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. The product must only be used as described and for the stated fields of application. If you pass the product on to third parties, please give them all of the documentation as well.

- Intended Use

This LED lamp set is suitable exclusively for providing illumination in dry interior rooms in a private, domestic environment. The light is intended for battery operation only. Other uses or changes to the product are considered to be contrary to the intended use and may harbour risks of injury and damage. The manufacturer does not accept any liability for injury or damage resulting from use of this product contrary to its intended use. The product is not intended to be used for commercial purposes.

● Description of parts

1 LED lamp
2 Battery compartment
3 Battery compartment cover
4 Self-adhesive pad
5 LED bulb
6 1.5V AAA battery

- Technical data

Bulbs: 4 x LEDs, 0.4 W (The LED bulbs cannot be replaced)

Batteries: 3 x 1.5 V ——, AAA (included)

- Includes

Immediately after unpacking please check the package contents for completeness and if all parts and the product are in good condition. Do not under any circumstances use the product if the delivery is incomplete.

3 LED lamps

9 1.5V---AAA batteries

1 Installation instructions

General Safety Instructions

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

WARNING! DANGER OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!

Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material. This is not a toy.

Children or other individuals who do not know or have no experience of handling this device, or whose physical, sensory or mental abilities are restricted, must not use the device without supervision or instruction by an individual responsible for their safety. Children must be supervised in order to ensure that they do not play with the device.
⚠️ CAUTION! RISK OF INJURY! Please do not use this device if you find that it is damaged in any way.
- Check whether all of the parts are correctly fitted. If the device is not correctly assembled there is a danger of injury.
- Keep the product away from humidity.

CAUTION! LED RADIATION!

Avoid damage to the eyes! Never look into the beam of the LED. Never

use optical devices such as magnifying glasses or similar to look into the beam of the LED.

Protect yourself and your environment by taking proper precautions.

■ Never point the LED beam at reflective surfaces, people or animals. This could result in blindness or irritation of the eyes. Even weak LED radiation could lead to eye injuries.
- Do not subject the device to any extreme temperatures or severe mechanical stress. Otherwise this may result in deformation of the product.
The lamps are only intended for use indoors, in dry and enclosed areas.
The lamps are only intended for use indoors, in dry and enclosed areas.

Battery Safety Instructions

WARNING! DANGER TO LIFE! Keep

batteries out of the reach of children. Do not leave batteries lying around. There is a risk of children or animals swallowing them. Consult a doctor immediately if a battery is swallowed.

EXPLOSION HAZARD! Never recharge nonrechargeable batteries, short-circuit and / or open batteries.

This can cause them to overheat, burn or burst.

General Safety Instructions / Bringing into use

Never throw batteries into fire or water. The batteries may explode.

■ Remove spent batteries from the product immediately. Otherwise there is an increased risk of leakage.
■ Always replace all batteries at the same time and only use batteries of the same type.
- Do not use different types of batteries or mix used and new batteries together.
- Check regularly that the batteries are not leaking.
- Leaked or damaged batteries can cause chemical burns if they come into contact with the skin; in such cases you must wear suitable protective gloves.
■ Remove the batteries from the product if it is not in use for any length of time.
■ Make sure that the polarity is correct when you insert the batteries. This is indicated in the battery compartment. The batteries can otherwise explode.
■ Remove used batteries from the device. Very old or used batteries may leak. The chemical fluid can damage the product.

● Bringing into use

- Inserting / replacing the batteries

Note: Remove the insulating strips before using the product for the first time.

Note: Switch the product off before you insert or remove the batteries.

LIVARNO LUX

☐ Turn the battery compartment cover 3 anticlockwise and take it off the battery compartment 2 (see Fig. A).
☐ Insert the (new) batteries into the battery compartment 2.
Note: Make sure you fit the batteries the right way round (polarity). The correct polarity is shown inside the battery compartment 2 .
☐ Put the battery compartment cover 3 back in place on the battery compartment 2 and turn it clockwise to tighten it (see Fig. B).

- Installing the light

☐ Pull off the protective film from the self-adhesive pad 4 of the battery compartment cover 3 (see Fig. C).

□ Attach the light in the desired location.

Note: The substrate should be dry, smooth and free of dust and grease.

Note: For the first 24 hours after installation do not remove the self-adhesive pad 4. Otherwise the self-adhesive pad 4 will lose its ability to stick.

- Switching On/Off

☐ Press the light in the middle to switch it on or off.

Troubleshooting/Cleaning and care/Disposal

● Troubleshooting

☐ This appliance has delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. This could be, for example, mobile telephones, walkie talkies, CB radios, remote controls and microwaves. If interference occurs, move such objects away from it.
Electrostatic charge can lead to the appliance failing. In cases of the appliance failing to work remove the batteries for a short while and then replace them.

- Cleaning and care

☐ Use a dry cloth to clean the light – never use petrol, solvents or cleaners that attack plastic.
☐ Use a slightly moist cloth to remove any stubborn dirt.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Defective or used batteries have to be recycled in line with Directive 2006/66/EC. Return batteries and/or the device via the recycling facilities provided.

Environmental damage through incorrect disposal of the rechargeable batteries!

Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used rechargeable batteries at a local collection point.

Product Description:

LED Lamps

Model No.: Z29538A/Z29538B

Version: 10/2010

EMC CE

Sisällysluettelo

Johdanto

EXPLOSIONSGEFAHR! Laden

c/o Milomex Services

Hilltop Cottage

Barton Road

Pulloxhill

Bedfordshire

MK45 5HP

UK

© by ORFGEN Marketing

Last Information Update · Tietojen tila · Informationsstatus

Tilstand af information · Stand der Informationen: 08 / 2010

Ident.-No.: Z29538A/B082010-3

3

Simple L-shaped geometric shape with no text or symbols