Perfect Clean CW1010 - Vacuum Cleaner Concept - Free user manual and instructions

Product type	3-in-1 window vacuum
Brand	Concept
Model	Perfect Clean CW1010
Battery voltage	DC 3.7 V
Battery type	Li-ion 2000 mAh
Run time	Approx. 35 minutes
Charging time	Approx. 4 hours
Charger voltage	Input: 100–240 V ~ 50/60 Hz; Output: DC 5 V / 500 mA
Sound power	< 65 dB(A)
Clean water tank capacity	Approx. 100 ml
Dirty water tank capacity	Approx. 100 ml
Included accessories	Suction nozzle with spatula, spray nozzle, microfibre cover, charger
Main functions	Spraying, suction, wiping
Charge indicator	Yes (red while charging, green when fully charged)
Cover maintenance	Washable in warm soapy water
Body cleaning	Wipe with a damp cloth
Safety	Do not immerse, unplug before cleaning, keep out of reach of children
Protection class	III
Insulation	Reinforced
Product warranty	24 months
Battery warranty	6 months
Estimated net weight	Approx. 0.8 kg

Frequently Asked Questions - Perfect Clean CW1010 Concept

How to assemble the Perfect Clean CW1010 vacuum?

Insert the nozzle onto the body until it clicks, then attach the microfibre cover using the Velcro strips.

How to charge the vacuum?

Plug the charger into the charging port (11) and then into a socket. The red indicator lights up during charging. When it turns green, charging is complete. Unplug the charger.

What is the charging and usage time?

Full charging takes about 4 hours. The battery life is about 35 minutes.

What to do if the sprayer does not spray?

Check that the clean water tank is filled. If the nozzle is blocked, fill the tank with hot water and gently press the lever. If that doesn't work, contact customer service.

Why is the tank leaking?

The dirty water tank may be full or the rubber seal of the filter unit is damaged. Empty the dirty water tank. If the seal is damaged, contact your supplier.

The vacuum loses suction, what to do?

Make sure the vacuum is sufficiently charged. Recharge it fully. If the problem persists, check that the intake paths are not blocked.

How to clean and maintain the vacuum?

Unplug the charger. Wash the microfibre cover in warm soapy water and let it dry. Wipe the body with a damp cloth. Never immerse the appliance in water.

What to do if the charge indicator flashes?

This means the device is not charging. Press the on/off button to restart charging.

What accessories are included and can they be replaced?

The suction nozzle with spatula, spray nozzle, microfibre cover, and charger are included. If needed, contact customer service to order spare parts.

How to dispose of the appliance at end of life?

Do not dispose of the appliance with household waste. Take it to a collection center for electrical and electronic equipment. The Li-ion battery must be removed and taken to an authorized collection center.

USER MANUAL Perfect Clean CW1010 Concept

Window vacuum cleaner 3 in 1

Fenstersauger 3 in 1

3D rendering of a concept air purifier device with visible internal structure (no text or symbols on the device itself)

CZ

The image contains no text or characters. It is a blank gray rectangle with no visible content, figures, or markings.

The image contains no text or characters. It is a blank gray square with a thin border. Therefore, there is no OCR result to output.

HU LV DE

RENSK PL

The image contains no text or characters. Therefore, the correct OCR output is an empty string.

IT ES

RO

concept

CZ

Poděkování

INSTRUKCJA OBSŁUGI

PRZED PIERWSZYM UŻYCIEM

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life.

Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure that any persons handling the vacuum cleaner are also familiar with this Operating Manual.

Technical parameters
Accumulator voltage DC 3.7 V
Charging adapter voltage	input: AC 100–240 V ~ 50/60 Hz
	output: DC 5 V, 500 mA
Noise level <65 dB (A)
Accumulator Li-ion 2000 mAh
Time of operation approx. 35 min
Time until fully charged approx. 4 hours

Reinforced insulation. Protection class III.

IMPORTANT SAFETY PRECAUTIONS

• Use the unit only as described in this operating manual.
• Make sure the mains voltage corresponds to the values on the rating plate of the charging adapter.
• Do not leave the unit unattended when switched on.
• When disconnecting the charging adapter from the wall outlet, never pull the power cord. Grasp the plug and disconnect it by pulling.
• Do not allow children or unskilled people to handle the unit. Use the unit out of the reach of these individuals.
  • Take extra care when using the unit near children.
• Don't let anyone use the unit as a toy.
• Use only accessories recommended by the manufacturer.
• Never use a charging adapter with a damaged power cord or plug. Contact an authorized service center immediately to have the defective components repaired or replaced.
• Keep the product away from heat sources such as radiators, ovens, etc. Do not expose the product to direct sunlight or moisture.
• Do not touch the unit with wet or damp hands.
• Do not insert any objects into the openings. Do not use the vacuum cleaner if any openings are obstructed.

EN

concept

concept

EN

• Extra care should be taken while vacuuming on stairs.
• If the suction inlet of the unit is obstructed, turn the unit off and remove the blockage before resuming operation.
• Turn the product off and disconnect the charging adapter from the mains outlet before installing accessories, performing maintenance, or in the case of any failure.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not vacuum any burning objects such as cigarettes, matches, or hot ash.
• Do not use the unit in wet rooms. Do not vacuum wet objects, liquids, or flammable fluids such as gasoline. Do not use the vacuum cleaner in areas where such substances may be present.
• Do not immerse the power cord, charging adapter, or appliance into water or any other liquid.
• Check the appliance as well as the power cord of the charging adapter for damage regularly. Do not switch on a damaged unit.
• Turn the unit off and let it cool down before maintenance and after use.
• Do not discard the accumulator of the unit into the fire or expose it to temperatures above 40 °C.
• Do not touch the driven moving parts while the unit is in operation.
• Do not repair the appliance yourself. Contact an authorized service center.
• This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Children must not play with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.

Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

1 Squeegee vacuum head

2 Spray nozzle
3 Clean water tank cap
4 Clean water tank
5 Charger
6 Dirty water tank cap

7 Microfibre cloth
8 Power button
9 Trigger
10 Charge indicator
11 Charging port
12 Dirty water tank

OPERATING INSTRUCTIONS

BEFORE FIRST USE

1. Carefully remove all contents from packaging and inspect the product for damage.
2. Assemble the appliance as per the instructions.
3. Charge the product for 4 hours.
4. Your appliance is now ready for use.

Dispose of the packaging in a responsible manner.

EN

concept

concept

EN

CHARGING

Before first use, charge the product for 4 hours.

The window vacuum needs to be charged for 4 hours for 30 minutes of continuous use.

How to charge:

1. Connect the lead from the charger to the charging port (11) on the window vac.
2. Plug the charger into the mains. During charging the indicator (10) will light red. When the window vac is fully charged, the indicator will light green.
3. Remove the charger from the mains and the connector from the window vac.

Note: If the indicator is flashing, the window vac is not charging, press the power button (8) to reset the window vac.

ASSEMBLY

1. Put the squeegee vacuum head (1) on the main body. An audible click will be heard, when it is in place.
2. Use the velcro to attach the microfibre cloth (7) on the squeegee vacuum head.

HOW TO USE THE APPLIANCE

1. Wipe the front edge of the squeegee (1) to remove any impurities.
2. Remove the clean water tank cap (3) and fill the tank with water using the water jug. Make sure not to overfill. You can add a small amount of window cleaning solution.
3. Pull trigger (9) to spray the solution on a window and wipe any excess dirt with the cloth.
4. Turn the window vac on by pressing the power button (8).
5. Move the window vac vertically from the top to the bottom of the window, until the window is clean.
6. Hold the window vac at the bottom of the window to suck any excess dirty water.
7. Turn the window vac off when the dirty water tank (12) is full.
8. Open the dirty water tank cap (6) and pour the content away.

Note: Always unplug the window vac from the charger before assembly, cleaning or maintenance.

TROUBLESHOOTING

Questions Answers
It does not spray Fill the water tank with water. Spray nozzle is blocked. Fill the tank with warm water and gently pull the trigger to unblock the nozzle. If this fails, contact the customer service.
Water is leaking from the tank	The water tank is overfilled or the dirty water tank is full. Check the rubber sealing of the filter unit, if it is damaged, contact the dealer to provide a new one.
It does not suck The vacuum is not charged sufficiently.

CLEANING AND MAINTENANCE

• Do not immerse the main body in water.
  • Always unplug the window vac from the charger before cleaning or maintenance.
• Wash the microfibre cloth in warm soapy water and let it dry properly
  • To clean the exterior of the window vac, wipe it with a soft damp cloth and then let it dry properly.
• Clean the squeegee vacuum head and spray head in warm soapy water and let it dry.

SERVICE CENTRE

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by a qualified service centre.

ENVIRONMENTAL PROTECTION

• Recycle packaging materials and old appliances rather than throwing them away.
• The appliance box may be disposed of at a sorted waste collection point.
• Deliver polyethylene (PE) plastic bags to a waste collection facility for recycling.

Recycling the product at the end of its service life

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The disposal of such material has to be done according to the recycling regulations. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the appliance.

Disposal of accumulators and battery cells

If an appliance contains an accumulator or a battery cell, these components contain substances that may damage the environment when decomposing. Prior to the appliance disposal or the accumulator or battery cell replacement, it is necessary to remove the original component and take it to a suitable designated collection yard.

WARNING!

An accumulator or battery cell:
- Never throw into a fire!
- Never disassemble it!
- Never short-circuit its terminals!
Should an accumulator or battery cell leakage occur, the leaked solution is of an alkaline character. If your skin gets stained, rinse it immediately with soap and water and seek medical treatment.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.

36

Danksagung

MANUALE D'USO

COSA FARE PRIMA DEL PRIMO USO

CONCEPT POLSKA sp. z o.o.

The manufacturer (or importer) is responsible for ensuring the product complies with the requirements of applicable legal regulations as well as those of the relevant technical standards. Moreover, they are responsible for ensuring the product has the properties the manufacturer described in documents related to the goods or those reasonably expected by the customer with regard to the nature of the goods or based on advertising produced by the manufacturer, and further they are responsible for ensuring the product is fit for the purpose proposed by the manufacturer or that a product of the same type is normally used for.

The quality warranty term is 24 months from product takeover by the customer.

The warranty does not apply to wear and tear caused by regular use. The customer shall not be entitled to any warranty claims if, prior to taking the product over, they knew the product contained a defect or if the defect is attributable to the customer.

In terms of these warranty conditions, a defective battery is considered a battery that is electronically inoperative (i.e., does not communicate with the base unit, the charging or discharging circuits are defective, etc.) or has an internal short circuit.

Defects or changes in parameters caused by normal use and wear (e.g. natural capacity decrease) are in no way considered a defect in terms of warranty.

The battery is provided warranty service for a period of 6 months. In terms of these warranty conditions, the battery has the nature of a consumable, for more details see „Consumables”.

Consumables

For consumables (batteries, etc.) we guarantee the preservation of technical parameters for 6 months, in case it was not damaged by improper use and its lifetime has not expired.

The warranty specifically does not apply:

• If the product installation, operation and service conditions stipulated in the product operating manual have not been adhered to,
• to malfunctions caused due to mechanical, heat or chemical damage, short circuit, over voltage or incorrect installation,
  • to malfunctions caused by an inexpert third-party intervention,
  • to malfunctions caused by natural disaster,
• to malfunctions caused by insufficient or inappropriate maintenance in violation of the operating manual, including malfunctions caused by water and other sediments.
  • to changes in colour of the heating surface or to scratching of the surface caused as a result of using the products in an unusual manner,
  • to appearance and functional changes caused by exposure to sunlight, thermal radiation of water and other sediments,
• If the service life of certain product parts expires, e.g. for accumulators, bulbs, etc.

The warranty does not apply to any products and services provided along with the product (gifts, promotional articles, etc.).

Filing a complaint

A complaint against a product defect must be filed as soon as identified, yet no later than before the end of the warranty term.

The customer must file a product complaint with the dealer from which they have purchased the product, or with any authorised service centre, a list of which is included in the product package, or available at www.my-concept.com.

While filing a product complaint, the product must be duly cleaned and securely packed so as to prevent any damage during its transport to an authorised service centre, where relevant, unless the product is delivered in person.

The customer must submit proof of having concluded a purchase contract for the product by producing the receipt.

While filing their complaint, the customer must indicate the noted defect and identify the preferred complaint application method.

Complaints processing

As long as the noted defect may be removed, the user has the right to have the defect duly removed free of charge on a timely basis.

If the noted defect is not removable, or if the customer becomes entitled to replacement of the product or a part thereof, yet the replacement is not possible, for example due to the product having been sold out, the customer has the right to return the product (withdrawal from the contract).

The customer shall have the right to a new product (replacement) or to replacement of a part of the product even if the defect can be removed, provided they cannot properly use the product due to repeated occurrence of the defect or due to a high number of such defects. In such a case, the customer also has the right to return the product (by withdrawing from the contract).

If the product is not returned (the customer does not withdraw from the contract), or if the customer does not apply the right to a new defect-free product (replacement), to replacement of a part thereof or to repair of the product, they may request a reasonable discount. The customer also has a right to a reasonable discount if a new defect-free product cannot be supplied to them, or if a product part cannot be replaced or the product repaired unless the situation is remedied within a reasonable time limit, or if remedying the situation would create major discomfort on the part of the customer.

The seller, authorised service centre or a staff member authorised by them must decide about each complaint immediately or within three business days in complicated cases. This term does not include a reasonable period of time, depending on the type of product concerned, required for the defect to be assessed by an expert. A complaint, including defect removal, must be dealt with without any undue delay, yet no later than within 30 calendar days of the complaint filing date, unless the seller and the customer agree on a later deadline.

On returning the product (withdrawing from the contract) the customer must return any accessories and documents supplied along with the product.

The customer does not have the right to keep the defective parts and components of the product replaced as part of a repair of the product.

This shall be without prejudice to any other rights the customer may have in relation to the purchase of the product.

Remark: Complaints against products damaged in transport are governed by the carrier's complaints procedure.

Manufacturer

Jindřich Valenta - Concept

Vysokomytská 1800, 565 01 Chocen

Czech Republic

tel.: [phone]

tax [phone]

Company ID No. 13216660

email: [e-mail]

www: www.my-concept.com

Product data

Model:
Production number:
Date of purchase: Seal and signature of vendor:

concept concept

DE

GARANTIEBEDINGUNGEN

Garantie

CONDITIONS DE GARANTIE

Garantie

CONCEPT POLSKA sp. z o.o.

Ostrowskiego 30, 53-238 Wroclaw Tel.: [phone], Fax: [phone] www.my-concept.pl

ASPICO KFT