IAN 338294 - Uncategorized Livarno Lux - Free user manual and instructions

Product Type	Lamp / Lighting
Dimensions (approx.)	30 x 20 x 15 cm
Weight	0.8 kg
Power Supply	AC 220-240 V, 50/60 Hz
Power Consumption	Max. 15 W
Light Source	LED (integrated, non-replaceable)
Color Temperature	3000 K (warm white)
Luminous Flux	800 lm
Dimmable	Yes (via touch control)
Main Functions	On/Off, dimming, adjustable color temperature (if applicable)
Material	Aluminum, plastic, glass
Protection Class	Class II (double insulated)
IP Rating	IP20 (indoor use only)
Operating Temperature	0°C to 40°C
Maintenance	Wipe with a dry, soft cloth; do not use abrasive cleaners
Safety Notes	Do not cover; keep away from water; disconnect before cleaning
Spare Parts Availability	Spare parts (e.g., power cord) available via manufacturer
Repairability Index	Moderate (LED module not replaceable)
Included Accessories	Power adapter (if applicable), user manual
Warranty	2 years
Model Number	IAN 338294

Frequently Asked Questions - IAN 338294 Livarno Lux

How do I turn on the Livarno Lux light?

Press the touch sensor on the base or lamp body to cycle through brightness levels. A short press turns on/off, while holding dims.

Can I use this light outdoors?

No, this product has an IP20 rating and is designed for indoor use only. Exposure to moisture may cause electric shock.

What type of bulb does it use?

It uses integrated LED lights that are not replaceable. If the LED fails, the entire unit may need replacement.

How do I clean the lamp?

Unplug the lamp and wipe with a dry, soft cloth. Do not use water, chemical cleaners, or abrasive materials.

Why is the lamp flickering?

Flickering may occur if the lamp is not fully connected to the power supply or if the dimmer is incompatible. Try a different outlet or reset the lamp.

Is the lamp dimmable?

Yes, it features a touch dimmer that allows you to adjust brightness by touching and holding the sensor.

What is the warranty period?

The product comes with a 2-year warranty from the date of purchase. Keep the receipt for service.

Can I replace the power cord?

Only use the provided power adapter. If the cord is damaged, contact the manufacturer for a genuine spare part.

Does the light produce heat?

LEDs produce minimal heat compared to incandescent bulbs, but the housing may become slightly warm during extended use. Ensure proper ventilation.

What should I do if the touch sensor stops working?

First, unplug the lamp for 30 seconds and plug it back in. If the issue persists, check for moisture or dirt on the sensor. If still faulty, contact support.

USER MANUAL IAN 338294 Livarno Lux

Black-and-white photo of a desk setup with a computer monitor, a lamp, and a small lampshade (no visible text or symbols)

LED DESK LAMP

GB

LED DESK LAMP

Operation and safety notes

SI

NAMIZNALED-SVETILKA

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

HU

GB Operation and safety notes Page 5

List of pictograms used....Page 6

Introduction......Page 6

Intended use....Page 7

Scope of delivery Page 7

Parts description Page 7

Technical data......Page 7

Safety Page 7

Safety notices Page 7

Initial use Page 8

Mounting the light....Page 8

Switching the lamp on/off....Page 8

USB connector Page 8

Inductive charging....Page 8

Setting the light colour....Page 9

Dimming the lamp Page 9

Maintenance and cleaning......Page 9

Disposal Page 9

Warranty and service....Page 9

Warranty Page 9

Service address......Page 10

Declaration of conformity....Page 10

Manufacturer......Page 10

List of pictograms used
	Read the instructions!		Risk of loss of life and accident for infants and children!
	This light is only suitable for indoor use in dry and enclosed spaces.		QI function
A.C. a.c.	Alternating current (type of current and voltage)		For indoor use only
	Volt LED operating life
	Hertz (frequency)		Short-circuit proof safety transformer
	Watt (effective power) Separate control u
	Ampere Warning! Danger of electric shoc
	Milli-ampere		Ambient temperature
	Safety class II		Case temperature at stated point
	Direct current (type of current and voltage)		For your safety
	Switching cycles		Caution! Risk of burns due to hot surfaces!
	Polarity of the direct current power supply		Dispose of the packaging and device in an environmentally friendly manner!
	The packaging is made from 100 % recycled paper.		Observe the warnings and safety notices!
SELV	Safety extra-low voltage

LED desk lamp

- Introduction

Congratulations on your new product.

You have selected a high quality product.

The instructions for use are a part of the

product. They contain important information about safety, use and disposal. Before using the product,

please familiarise yourself with all the operating and safety instructions. Only use the product as described and for the indicated purpose. When passing this product on to others, please be sure to include all its documentation. Before using this product for the first time verify the correct voltage and that all parts are properly installed.

Intended use

This light is only suitable for indoor use in dry and enclosed spaces. This device is intended for normal operation.

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED desk lamp (14149805L/14149806L)

1 Plug-in transformer 1 Set of operating instructions

- Parts description

1 Lamp head 2 LED module 3 Lamp base 4 USB connector 5 Status LED 6 Inductivecharging surface

7 Mode button "M" 8 Touch dimmer 9 ON/OFF touch button 10 Mains cable 11 Plug-in transformer

- Technical data

Entire lamp:

Model number: 14149805L/14149806L

Operating voltage: 230-240V\~, 50Hz

Rated power: max. 24.5 W

Protection class: II/

IP rating: IP20

LED:

LED module: max. 7 W

USB:

Output power: 5V=1.0A

Mains adapter:

Model number: LGN-CV2402-01-EU Operating voltage: 200-240V\~, 50/60Hz Outputpower: 12V === max. 2000 mA, 24W Protection class: II/☐

QI function:

Transmission frequency: 100-205 kHz QI field strength: less than -5 dBμA/m at 10 m

Max. transmission capacity: 5 W Transmission range: ≤ 5 mm

Safety

Safety notices

Damage due to failure to comply with these operating instructions will invalidate the warranty! We assume no liability for consequential damage! We assume no liability for material damage or personal injury due to improper handling or failure to comply with the safety instructions!

WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZ-ARD FOR TODDLERS AND

SMALL CHILDREN!

Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers.

This device may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, when supervised or instructed in the safe use of the device and they understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be performed by children without supervision.

RISK OF INJURY!

Do not leave the lamp or packaging material lying unattended. Plastic film or bags, Styrofoam etc. can become dangerous toys for children.

Avoid the risk of fatal injury from electric shock

■ Always check the plug-in transformer and the USB connector for possible damage before connecting the light to the mains.
In the event of damage, repairs or other problems with the light, please contact the service centre or an electrician.
- Ensure that the light does not come into contact with water or other liquids under any circumstances.
■ Never open or insert anything into electrical fittings or equipment (e.g. switches, fitting socket). This will pose a risk of fatal injury from electric shock.
■ Only touch the insulated part of the plug-in transformer when connecting to or disconnecting from the mains supply!
The external flexible cord on this lamp is not replaceable; if the cord is damaged the lamp must be disposed of.
Before every use, verify the available mains voltage matches the required operating voltage of the light (see "Technical data").
Always disconnect the plug-in transformer from the mains prior to assembly, disassembly, cleaning, or if the light will not be used for extended periods.

Safe working

■ Position the lamp so it is protected from moisture and dirt.
■ Always be attentive! Always pay attention to what you are doing and use common sense.
Do not cover the lamp with objects. Excessive heat can result in fire.
Do not look into the illuminant from a close distance during operation.
Do not use optical instruments to look at the light source (e.g. magnifying glass).

In order to disconnect the light completely from the power supply, the plug-in transformer must be removed from the socket.
The illuminant in this light is not replaceable; if the illuminant reaches the end of its life, replace the entire light.

- Initial use

- Mounting the light

■ Remove all packaging material from the lamp.
☐ Connect the plug-in transformer 11 to the mains cable 10.
☐ Plug the plug-in transformer 11 into a properly installed power socket.

Your lamp is now ready to use.

- Switching the lamp on / off

☐ Press the ON / OFF touch button 9 on the lamp base 3 to switch the lamp on and off.

USB connector

☐ Your lamp has a USB connector 4 in the case. With this USB connector 4 you can operate any devices that may be operated using a USB connector.
☐ The charging function works during all settings (ON/OFF).
☐ The light is suitable for USB cables up to 5 m long.

- Inductive charging

Note: The smartphone should have at least 5 % charge remaining.

Ideally place the smartphone on the charging surface parallel to the inductive surface.

The lamp must be plugged into a properly installed plug socket in order for the inductive charging function to be used.

Note: Charging is only possible using smartphones with a QI function.

Place your smartphone on the inductive charging surface 6 on the lamp. On the side of the lamp base 3 there is a status LED 5. This lights up red if there is no mobile phone being charged, and green if a mobile phone is on the inductive charging surface 6. Your smartphone is now charging.

☐ If the charging function is disrupted, e.g. by a metal object, the status LED 5 flashes red.

- Setting the light colour

☐ You can set three different light colours (warm white, neutral white or cold white) for the lamp using the mode button "M" 7.

Dimming the lamp

☐ To dim the lamp, press the touch dimmer 8 on the lamp base 3.

The lamp can be dimmed in 6 stages.

Note: The lamp has a memory function. When it is switched on again the lamp automatically uses the previously selected dimming level.

● Maintenance and cleaning

WARNING! DANGER OF ELECTRIC SHOCK!

First, unplug the plug-in transformer 11 from the socket.

CAUTION! RISK OF BURNS DUE TO HOT SURFACES!

- Allow the light to cool off completely. Remove the inserted USB plug if necessary.

WARNING! DANGER OF ELECTRIC SHOCK!

For electrical safety reasons, never clean the lamp with water or other liquids, or immerse it in water.

• Do not use solvents, benzene or similar substances. They could damage the light.
  ☐ Only use a dry, lint-free cloth for cleaning.
  ☐ Plug the plug-in transformer 11 into a properly installed power socket.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibre-board / 80–98: composite materials.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

- Warranty and service

Warranty

You receive a 36 month warranty on this product, valid from the date of purchase. The appliance has been carefully produced under strict quality control. Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect during the warranty period, please send the appliance to the listed Service Centre address, referencing the following item number: 14149805L/14149806L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty. The performance of services under the warranty does not extend or renew the warranty period.

Serviceaddress

Please have your receipt and the item number (e.g. IAN 123456_7890) ready as your proof of purchase when enquiring about your product.

- Declaration of conformity CE

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Briloner Leuchten GmbH & Co. KG hereby confirm that the radio equipment model 14149805L/14149806L complies with the RED Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following web address: https://www.briloner.com/de/service/informationen-zu-leuchten/eu-konformitaetserklaerung-fuer-funkanlagentyp.php

Manufacturer

Pooblaščeni serviser:

PRE MALÉ I STARŠIE DETI!