IAN 330867 - Alarm clock radio AURIOL - Free user manual and instructions
Find the device manual for free IAN 330867 AURIOL in PDF.
| Product Type | LCD Radio-Controlled Alarm Clock |
| Power Supply | 1 x 1.5V AA battery (LR6/R6) |
| Radio Signal | DCF77 (auto sync daily 1:00-4:00) |
| Display | Time, date, day of week, temperature, alarm indicators, snooze, 12/24h format |
| Alarms | 2 separate alarms: Alarm 1 (Mon-Fri), Alarm 2 (Sat-Sun) |
| Snooze | Approx. 8 minutes, press SNOOZE/LIGHT button |
| Backlight | Brief activation via SNOOZE/LIGHT button |
| Temperature Display Range | -10°C to 50°C (indoor) |
| Temperature Unit | Selectable °C or °F |
| Day of Week Languages | GE, EN, IT, FR, DU, SP, HU, SL |
| Time Zone Adjustment | Adjustable in hours (e.g., -01) from UTC+1 |
| Manual Time Setting | Possible if radio reception fails |
| Cleaning | Soft, dry, lint-free cloth; do not submerge |
| Safety Precautions | Keep away from water, heat, direct sunlight, magnetic fields, open flames; not for high humidity |
| Battery Safety | Keep out of children’s reach; correct polarity; do not recharge non-rechargeable |
| Disposal | Separate e-waste and batteries according to local regulations |
| Warranty | 3 years from purchase date, subject to conditions |
| Service Contact | digi-tech gmbh, email: support@inter-quartz.de, phone: +49 (0)6198 571825 |
| Compliance | EU RED 2014/53/EU; declaration at http://www.digi-tech-gmbh.com/ce/330867_1907_RC-WE.pdf |
Frequently Asked Questions - IAN 330867 AURIOL
User questions about IAN 330867 AURIOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual IAN 330867 - AURIOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 330867 by AURIOL.
USER MANUAL IAN 330867 AURIOL
Usage and safety instructions

RADIO-OHJATTU LCD-HERÄTYSKELLO
Scope of delivery....- 2 -
Technical specifications - 2 -
Important safety information Important safety.information.... - 2 -
Important safety information for users - 2 -
Important safety information for the batteries.... - 3 -
Set up the alarm clock safely - 3 -
Display and controls....- 3 -
Setup -4-
Time zone adjustment - 4 -
Restart....- 5 -
Activating/ deactivating radio signal reception ....- 5 -
Reception problems - 5 -
Light 5
Temperature display - 5 -
Speed setting....- 5 -
Basic settings....- 6 -
Alarm....-6-
Activating and deactivating the alarms -6-
Snooze....-6-
Cleaning instructions....-7 -
Simplified EU declaration of conformity -7-
Disposal....-7-
Disposal of the electronic appliance ....- 7 -
Disposal of the batteries -7-
Recycling....-7-
Waste disposal - 8 -
digi-tech gmbh warranty - 8 -
Warranty conditions - 8 -
Warranty period and defects liability - 8 -
Scope of the warranty - 8 -
Warranty claim procedure - 8 -
Service....-9-
Supplier....-9-
LCD RADIO-CONTROLLED ALARM CLOCK
Introduction
Congratulations on the purchase of your new alarm clock. You have chosen a high quality appliance. The manual is part of the appliance. It contains important safety, usage and disposal information. Please read all usage and safety instructions before using the appliance. Please only use the appliance as described and for the described uses. If you sell or give this alarm clock to someone else it is very important to also include this manual. Please keep the packaging and the instruction manual for future reference.
Intended use
This electronic appliance is intended for time display and the described additional features. Any other use or modification of the electronic appliance does not comply with the intended uses. The manufacturer is not liable for damages caused by improper use or misuse. The device is not intended for commercial use.
Scope of delivery
Please note: Check the scope of delivery after purchase. Please ensure that all parts are included and undamaged.
- 1 x Alarm clock
- 1 x Battery 1,5 V AA LR6
- 1 x Instruction manual
Technical specifications
• Measuring range (inside): -10^ -50^
• Batterie: 1 x 1,5 V AA R6/LR6
- Symbol for direct voltage

Important safety information
Important safety information for users

WARNING! RISK OF INJURY!
This device may be used by persons (including children over 8 years of age) with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or instructed regarding the safe use of the device and understand the dangers that may arise. Children may not play with the device. Cleaning and user maintenance of the device may not be performed by children without supervision. Keep packaging films out of the hands of children. There is a danger of suffocation.
-2-

Important safety information for the batteries

WARNING!
HEALTH HAZARD!
RISK OF EXPLOSION!
Keep batteries out of reach of small children. If a battery is swallowed, you must seek medical attention immediately. Batteries/rechargeable batteries must always be inserted in the correct polarity. If necessary, clean the battery and device contacts. Never attempt to recharge non-rechargeable batteries. Never short-circuit or attempt to open batteries. Never throw batteries into fire as they may explode.
If the device will not be used for an extended time period, remove the battery and store the device in a dry and dust-free area. Improper use of the battery can lead to explosion or leakage.
If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves. If you are exposed to battery acid, rinse the affected areas with plenty of clean water and immediately seek medical attention. Remove discharged batteries from the device as they present an increased risk of leakage.
Set up the alarm clock safely
The alarm clock is not intended for use in rooms with high humidity (example: bath room). Make sure that:
- the device isn't placed on a thick carpet or bed during operation;
- no direct heat sources (i.e. radiators) influence the device;
- no direct sunlight reaches the device;
- contact with splashing or dripping water must be avoided (don't place any items filled with liquids, i.e. vases, onto or next to the device);
- the device doesn't stand near magnetic fields (i.e. speakers);
- candles and other open flames must be kept away from this product at all times to prevent the spread of fire;
- no foreign objects penetrate the housing.
Display and controls

-3-

GB
| 1 Display 14 SET / °C / °F | ||
| 2 SNOOZE / LIGHT 15 ALARM / SET | ||
| 3 Time 16 RCC / RESET | ||
| 4 Seconds 17 | ▲/ ALARM ON / OFF | |
| 5 Radio tower indicator 18 / RCC OFF | ▼ | |
| 6 Temperature indicator 19 Battery compartment | ||
| 7 Day of the week indicator | ||
| 8 Date indicator, D=day,M=month | ||
| 9 Alarm 2 (6 - 7) | ||
| 10 Alarm 1 (1 - 5) | ||
| 11 Alarm time | ||
| 12 Snooze indicator | ||
| 13 12/24 hour time format | ||
Setup
Remove the protective film from the display of the alarm clock. Open the battery compartment 19 on the backside of the device and insert a 1.5V AA R6/LR6
battery in the correct polarity. Close the battery compartment 19. Radio time signal reception starts automatically after inserting the

battery and the alarm clock will beep once. The radio tower indicator ⚠5 will blink on the display. This process can take 3-10 minutes.
Note: Please do not move the alarm clock during the reception process.
The alarm clock synchronizes the internal clock every day from 01:00 to 04:00 on each full hour. If reception is unsuccessful, the clock will reattempt reception at 05:00 and 06:00. Please set the time manually, if reception fails (see "Basic settings").
If reception is successful, the radio tower indicator ✦5 appears permanently on the display and the time, date and day of the week are set automatically. During daylight saving time, DST appears on the display next to the radio tower indicator.
Time zone adjustment
If you are in a country in which the current time is incorrect even though the DCF77 signal was received, please use the time zone adjustment to adjust the time zone to a different setting than the standard setting (UTC+1 = Central European Time). Set the difference in hours (for example -01) to the required time zone.
Press and hold SET / °C / °F 14 for 3 seconds in normal time display mode. The language of the day of the week will blink. Press SET / °C / °F 14 8x.
-4-

Now the time zone will blink (00) and can be set using ▲ ALARM ON / OFF 17 or ▼ / RCC OFF 18. Confirm your setting by pressing SET / °C / °F 14. Now perform a restart. The clock will continue to receive the DCF-77 radio control signal but will show the changed time (for example, 1 hour less).
Restart
Radio reception can be manually restarted by pressing RCC / RESET 16 on the backside of the clock for 4 seconds. The radio tower ✦5 will blink on the display. This process can take from 3 to 10 minutes. If radio reception fails, the time must be set manually (see basic settings).
Activating/ deactivating radio signal reception
Radio signal reception can be deactivated manually by pressing ▼ / RCC OFF 18 on the backside of the clock for 4 seconds. The radio tower ⚠ will disappear from the display. Press for 2

seconds ▼ / RCC OFF 18 again. The radio waves will disappear from the display. The clock will now no longer receive the radio signal. Set the time manually as described in basic settings. Radio signal reception can be restarted by pressing RCC / RESET 16 on the backside of the clock for 4 seconds. The radio tower 5 will blink on the display. This process can take from 3 to 10 minutes. If radio reception fails, the time must be set manually (see basic settings).
Reception problems
The DCF77 radio signal is transmitted from a location near Frankfurt am Main and can be received within a radius of approximately 1500 km around Frankfurt am Main. However, there are some obstacles and sources of interference, which may substantially hinder reception. If your alarm clock does not correctly receive the DCF77 radio signal, please hang or place the alarm clock a different location at your site. Please note that devices such as computers, telephones, radios and televisions may cause electromagnetic radiation which can interfere with the DCF77 signal reception. Other possible detriments to reception are: strong building insulation (metal building materials), nearby mountains or atmospheric interference. It may also be necessary to replace the batteries.
Light
Press SNOOZE / LIGHT 2 on the top of the clock to briefly activate the light.

Temperature display
Press SET / °C / °F 14 to select the temperature unit Celsius (°C) or Fahrenheit (°F).

Speed setting
When setting numerical settings, press and hold the relevant button to use the speed setting feature.
-5-

Basic settings
The following settings are possible: Language of the day of the week, 12/24 hour time format, year, date format (M=month, D=day), month, day, hours, minutes and time zone.
Press and hold SET / °C / °F 14 in normal time display mode for 3 seconds. The language of the day of the week will blink on the display and can be set using
▲ / ALARM ON / OFF 17 or ▼ RCC OFF 18. The following languages are available: GE=German, EN=English, IT=Italian, FR=French, DU=Dutch, SP=Spanish, HU=Hungarian, SL=Slovenian. Press SET / °C / °F 14 to confirm your setting. Set the 12/24 hour time format, the year, the date format (M=month, D=day), the month, the day, the hours, the minutes and the time zone in the same way.
Alarm
2 different and separate alarm times are available for setting.
Alarm 1 (1 - 5) for the days Monday to Friday.
Alarm 2 (6 - 7) for Saturday and Sunday.
Press and hold ALARM / SET 15 to enter alarm time setting mode. The hours of alarm 1 (1 - 5) will blink on the display. Press ▲/ ALARM ON / OFF 17 ▼/ RCC OFF 18 to adjust the setting and press ALARM / SET 15 to confirm your setting. Set the minutes and the alarm time of the second alarm (6 - 7) in the same way.
Activating and deactivating the alarms
Press ▲ALARM ON / OFF 17 in normal time display mode
1 time to activate Alarm 1(1 - 5) 10 and
2 times to activate Alarm 2 (6 - 7) 9,
3 times to activate both alarms.

Press ALARM / SET 15 to switch between the alarm time
displays of Alarm 1(1) - 5 and 2 (627).
1-5
②

1
②6-7

4 times to deactivate both alarms.
When the alarm is activated, the bell symbol will appear ⚠️. ⚡ The alarm will sound at the set time and will increase in frequency 3 times every 10 seconds. If the alarm is not switched off, it will switch off automatically after 3 minutes.
Snooze
Press SNOOZE / LIGHT 2 on the top of the case when the alarm sounds. The light will briefly turn on and Z^Z 12 and the bell symbol
/ will blink on the display. The alarm will be turned off temporarily and will sound again after around 8 minutes.
-6-

GB
Cleaning instructions
Improper cleaning can damage the device. Do not submerge the device in water or other liquids. Do not use aggressive cleaners, brushes with metal or nylon bristles, or sharp or metallic cleaning tools such as knives, scrapers or similar implements. These may damage the surface of the device. Clean the device using a soft, dry, lint-free cloth, such as a glasses cleaning cloth.
Simplified EU declaration of conformity

Hereby, digi-tech gmbh declares that the radio equipment type 4-LD5270 is in compliance with Directive RED 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.digi-tech-gmbh.com/ce/330867_1907_RC-WE.pdf
Disposal
This device and all the packaging materials are recyclable. Please dispose of them separately for better waste handling. You can find out about disposal options for your product by contacting your municipality.
Please take note of the marking of packaging material when separating waste materials. They are marked with abbreviations (a) and numbers (b) with the following meanings: 1-7 plastics / 20-22: paper and cardboard / 80-98: composite materials.

Disposal of the electronic appliance
This alarm clock may not be disposed of with normal household waste. In the interest of the environment, when your device has reached the end of its usefulness, do no throw it in the normal household trash. Dispose of it in the proper and correct way. You can find out about collection sites and their business hours from your public administration. Please adhere to applicable requirements.

Disposal of the batteries
Defective or spent batteries/rechargeable batteries must be recycled in accordance with directive 2006/66/EC and its revisions. Return batteries, rechargeable batteries or the device at the available collection sites.

Improper disposal of batteries / rechargeable batteries causes environmental damage!
Batteries / rechargeable batteries may not be disposed of in normal household waste. They may contain toxic heavy metals and are subject to hazardous waste treatment. The chemical symbols of the heavy metals are as follows: Cd = Cadmium, Hg = Mercury, Pb = lead. Therefore, please dispose of spent batteries / rechargeable batteries at a communal collection site.
Recycling
The product packaging consists of recyclable materials. Dispose of the packaging in an environmentally sound manner using the proper collection systems.

-7-

Waste disposal
Dispose of the packaging in an environmentally responsible fashion. Please note the marking of the different packaging materials and separate them if applicable.

digi-tech gmbh warranty
This alarm clock includes a 3 year warranty starting on the day of purchase. In case of defects of this alarm clock you have, by law, certain rights regarding the vendor of the alarm clock. These rights are not changed by the warranty which is described in the following paragraphs.
Warranty conditions
The warranty duration starts on the date of purchase. Please keep the original receipt in a safe place. The receipt is needed as a proof of purchase. If a defect occurs in the alarm clock within 3 years, the alarm clock will be repaired or replaced (according to our choice) free of charge. This warranty requires that, within the 3 year warranty period, the alarm clock and the receipt can be made available to us along with a short written description of the defect and when it occurred. If the defect is covered by the warranty, you will receive the repaired alarm clock or a new alarm clock. Repair or replacement does not cause the warranty period to restart.
Warranty period and defects liability
The warranty period is not increased by the defect liability. This also applies to repaired or replaced parts. If defects are noticed at the time of purchase they must be reported immediately upon unpacking the item. Paid repair may be available after the end of the warranty period.
Scope of the warranty
The alarm clock was manufactured according to strict quality guidelines and was carefully inspected before delivery. The warranty does not include parts that experience normal wear and tear and can thus be seen as wear parts or fragile parts that are damaged. Examples include Switches, Batteries or parts made of glass. This warranty becomes void if the alarm clock is damaged, is not used in the recommended way or is improperly repaired. For proper use of the alarm clock all instructions in this manual must be adhered to exactly. Use of the alarm clock in a way that is discouraged in the manual must be avoided. The alarm clock not intended for commercial use. Abusive or improper use, excessive force and changes that are made by non-authorized repair centres will void the warranty.
Warranty claim procedure
To ensure that your call is processed in a fast and efficient manner please note the following directions:
- Have your receipt (as proof of purchase) and the article number (330867_1907) handy.
- The article number can be found on the type label, an engraving, the front page of the manual (bottom left) or a sticker on the backside or bottom side of the case.
- In case defects occur, please first contact the service centre (see below) by phone or email.
-8-


Visit www.lidl-service.com to download this and many other manuals, product videos and software.

With this QR-Code you can reach the Lidl-Service-Site (www.lidl-service.com) directly and you can open your manual by entering the article number (330867_1907).
Service
Please note that the following address is not a service address.
Please first contact the service address (see above).
Name: digi-tech gmbh
Street: Valterweg 27A
Town: DE-65817 Eppstein
Country: GERMANY

-9-

Sisällysluettelo
FI
E-post: support@inter-quartz.de
Telefon: : +49 (0)6198 571825


8800 33139
IAN 330867_1907
Art.-Nr.: 4-LD5270

Leverantör
Olulised ohutusjuhised
E-post: support@inter-quartz.de
E-pasts: support@inter-quartz.de
Tālrunis: +49 (0)6198 571825

LT 8800 33139
IAN 330867_1907
Art.-Nr.: 4-LD5270
