Glory Pro - Hair Dryers DREAME - Free user manual and instructions

USER MANUAL Glory Pro DREAME

Dreame Hair Glory High-Speed Hair Dryer User Manual

EN Important Safety Instructions 001
DE Benutzerhandbuch....015
FR Manuel d'utilisation 028
IT Manuale dell'utente 041
ES Manual de usuario 054
RU Руководство пользователя....067
NO Brukerhåndbok 081
SV Användarhandbok 094
FI Käyttöohje....107
DK Brugermanual....120
PL Instrukcja obstugi....133
TR Kullanıcı Kılavuzu 146
HE 160
AR 172 ..... دليل المستخدم
PT Instruções de segurança importantes .... 184
GR Σημαντικές οδηγίες ασφαλείας 198

Read this manual carefully before use, and retain it for future reference.

EN

Precautions

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• CAUTION : In order to avoid a hazard due to inadvertent rese ing of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

WARNING:

Do not use this appliance near bathtubs, showers basins or other vessels containing water.

- when the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off.

EN

- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

WARNING

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Do not block the air intake and air outlet to avoid danger.
• During use, prevent your hair from getting caught in the air intake to avoid danger.
• Please use the hair dryer according to the rated power information indicated on the device, and do not use universal plugs or other voltage converters to avoid danger.

Power Cord & Plug

• Do not use the hair dryer if the power cord or power plug is damaged or overheated, as this may cause burns, electric shocks, or cause fire due to a short circuit.
• Do not use the hair dryer if the power plug that is plugged into the power outlet is loose, as this may cause burns, electric shocks, or cause fire due to a short circuit.
• Do not use the hair dryer if the power plug that is plugged into the power outlet is loose, as this may cause burns, electric shocks, or cause fire due to a short circuit.
• Do not plug in or unplug the power plug with wet hands, as this may result in electric shocks and injury.

- Do not damage, modify, forcefully bend, pull, twist, or squeeze the power cord, nor place heavy objects on top of it, as this may cause electric shocks, or cause fire due to a short circuit.

- Do not pull the power cord when unplugging the power plug. Make sure to hold the power plug when unplugging it. Otherwise, the power cord may get damaged, cause burns, cause electric shocks, or cause fire due to a short circuit.

- Completely and directly plug the power plug into a 220-240 V\~electrical outlet. Do not use a power strip or extension cords, as this may cause electric shocks, or cause a fire due to a short circuit.

- Make sure the hair dryer is unplugged when not in use as well as prior to performing any maintenance or repairs.

- Keep the power cord away from heat sources and other places that may compromise its protection.

Usage & Storage

- Do not block or insert foreign objects into the air outlet and air intake, as this may cause burns, electric shocks, or cause fire due to a short circuit.

- Do not immerse this hair dryer in water.

- Do not use this hair dryer in humid environments.

- Keep the hair dryer dry, otherwise it may cause electric shocks.

- Do not use the hair dryer in environments where aerosol (spray) products are used or where there are flammable sources.

- Do not leave the hair dryer unattended when it is turned on, as this may result in a fire due to a short circuit.

EN

- Do not damage, modify, forcefully bend, pull, twist, or squeeze the power cord, nor place heavy objects on top of it, as this may cause electric shocks, or cause fire due to a short circuit.

- Do not pull the power cord when unplugging the power plug. Make sure to hold the power plug when unplugging it. Otherwise, the power cord may get damaged, cause burns, cause electric shocks, or cause fire due to a short circuit.

- Completely and directly plug the power plug into a 220-240 V\~electrical outlet. Do not use a power strip or extension cords, as this may cause electric shocks, or cause a fire due to a short circuit.

- Keep the power cord away from heat sources and other places that may compromise its protection.

- Make sure the hair dryer is unplugged when not in use as well as prior to performing any maintenance or repairs.

- Do not block or insert foreign objects into the air outlet and air intake, as this may cause burns, electric shocks, or cause fire due to a short circuit.

- Do not immerse this hair dryer in water.

- Do not use this hair dryer in humid environments.

- Keep the hair dryer dry, otherwise it may cause electric shocks.

- Do not use the hair dryer in environments where aerosol (spray) products are used or where there are flammable sources.

- Do not leave the hair dryer unattended when it is turned on, as this may result in a fire due to a short circuit.

- Do not store the hair dryer in a highly humid environment, as this may cause electric shocks, or cause fire due to a short circuit when using the hair dryer.

- Do not store the hair dryer within the reach of children and infants, as this may result in electric shocks and injury.

- Do not repair, disassemble, or modify this product yourself, as this may cause injury or fire due to malfunctioning. Please contact the customer service via https://global.dreametech.com

- Do not immerse the body of the hair dryer containing electrical components in water or other liquid. If the hair dryer falls into water, unplug it immediately and do not continue to use it even after it is dry.

- Do not place the hair dryer on its air intake while it is turned on, as this may cause the heating coil to overheat, which may result in a fire.

- This hair dryer is equipped with a non-self-resetting thermal safety cut-off to prevent overheating. If the hair dryer is cut off due to overheating, unplug it from the power outlet and allow it to cool down.

- Do not touch hot surfaces such as the air outlet during use or immediately after turning off the hair dryer to avoid burns.

- Do not touch the power plug or any part of the product with wet hands to prevent electric shocks.

- Do not use this hair dryer for any purpose other than drying hair, and do not use it on pets nor use it to dry shoes or clothes, etc., as this may cause burns, or cause fire due to a short circuit.

CAUTION

In case of a malfunction or breakdown

- In the event of a malfunction or breakdown, such as no air blowing, frequent stops, internal overheating, or smoking, please stop using the product immediately, unplug the power cord, and contact the customer service via https://global.dreametech.com. The use of this product in these circumstances may result in electric shocks, injury, or fire due to a short circuit.

- The air outlet and air nozzle may get hot during use, so do not touch them with your hands, as this may cause burns.

- Avoid dropping the hair dryer or subjecting it to strong impacts, as this may cause electric shocks, or cause fire due to a short circuit.

- Do not use the hair dryer if the air intake is damaged, as your hair may get caught in it and cause damage to the hair.

- Do not use the hair dryer on infants or young children, as it may cause burns.

Product Features

The Dreame Hair Glory High-Speed Hair Dryer with its constant-temperature drying system, high-speed brushless motor and negative ion hair care technology has been carefully designed by Dreame's aerodynamics laboratory to meet your personal hair-drying needs.

High-Speed Brushless Motor

With its 110,000 rpm high-speed brushless motor, the hair dryer instantly generates strong airflow that dries hair quickly without damaging it.

Negative Ion Hair Care Technology

The built-in negative platinum ion transmitter generates negative ions to neutralize positive and negative charges in the hair, reducing static buildup and avoiding frizz.

Vertical Motor Positioning

The motor is placed vertically in the handle, lowering the hair dryer's center of gravity for a more comfortable and balanced grip.

Noise Reduction Design

Motor optimization modulates sharp high frequency noise to a frequency that is undetectable to the human ear, the noise is reduced further with dynamic balancing and added acoustic foam, giving you a better user experience.

Product Overview

Technical diagram of a laboratory apparatus with numbered components labeled 1, 2, and 3.

4 7 5 6 8 9

1 Air Outlet Vent

6 Hot

2 Handle

7 Hot/Cold Cycle

3 Removable Airflow Filter

8 On/Off Switch & Speed Settings

Do not use the hair dryer without the airflow filter to avoid danger.

9 Temperature Button

4 Cold

5 57^ Constant

Simple line drawing of a bathtub with a red diagonal line and a magnifying glass above it (no text or symbols)

This symbol means "Do not use while bathing or showering."

Illustrations of the hair dryer, accessories, and user interface in the user manual are for reference purposes only. The actual product may vary due to product updates and improvements.

Settings

On/Off Switch & Speed Settings

Slide up and down to quickly switch between the two speed settings.

Make sure that the switch is turned off before plugging the hair dryer in.

Off ( ○ ) Low ( ) High ( ) =

Heat Settings

Press to cycle through the four heat settings: cool air, 57°C constant temperature, hot air drying, and hot/cold cycle.

※	57	※	※
Cold 57°C	Constant Hot Hot/Cold Cycle
Blowscool roomtemperatureair suitablefor hairstyling.	Perfecttemperatureto avoid heatdamage whenblow dryingyour hair.	Suitablefor quicklydrying wethair.	7s of hot airfollowed by 5sof cool air toreduce heatbuildup.

Cleaning and Maintenance

The filter needs to be cleaned regularly to prevent debris from building up and ensure a smooth air flow.

- Before cleaning the filter, make sure that the hair dryer is turned off and unplugged.

Two simple circles with a small symbol inside, no text or labels present

- The airflow filter is magnetically attached. Hold the handle and pull the airflow filter straight down to remove it from the handle.

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

Do not rinse the stainless steel filter with water as this may cause it to not work correctly.

- Use a dry lint-free cloth, soft brush or toothbrush to remove any debris stuck to the surface of the airflow filter or stainless steel filter.

Diagram of a mechanical device with a textured base and a brush applying force (no text or symbols)

- After cleaning, insert the air inlet filter into the handle slot, and listen for a "click," indicating that the magnet is in place and the installation is complete.

Click

Basic Parameters

Product name	Dreame Hair Glory High-Speed Hair Dryer
Model number	AHD6A-WH, AHD6A-RS, AHD6A, AHD7
Rated voltage 220	-240 V~
Rated frequency 50	/60 Hz
Rated power 1600 W
Product dimensions	76 × 82 × 255mm
Date of manufacture	See product packaging

Troubleshooting

Common issue	Possible cause	Solution
Hair dryer won't turn on	Circuit board is damaged	Return for repair
	Not connected to the power	· Check whether the plug is plugged in correctly or not, and restart after confirming that it is.· If the issue is not resolved, return the hair dryer for repair.
Flashing light alert	Power cord issue	· Check the air outlet/ inlet vents for debris. After confirming they are clear, wait until the hair dryer has cooled down before restarting.· If the issue is not resolved, return the hair dryer for repair.
Internal coil is red	Air outlet or inlet vent issue
Heat setting indicator light not working	Motherboard is damaged	Return for repair
Lighting error
Button not working	Button is damaged
Power cord/ plug is overheating	Power cord is damaged
Burning smell during use	Damage to an internal component

EU Declaration of Conformity

We, Dreame Trading (Tianjin) Co., Ltd., here by, declare that this equipment this in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address:https://global.dreametech.com

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Vorsichtsmaßnahmen

Technical diagram of a laboratory instrument with labeled parts 1, 2, and 3

4 7 5 6 8 9

Two simple circular shapes with a small dot above them, no text or symbols present.

Diagram of a mechanical component with internal mesh structure and two downward arrows indicating force or direction (no text or symbols)

DE

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a laboratory instrument with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Sortie d'air

6 Chaud

2 Poignée

7 Cycle chaud/froid

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Uscita dell'aria

5 Costante a 57°

2 Impugnatura

6 Caldo

Off ( ○ ) Basso ( ) Alto ( + ) =

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

IT

Diagram of a mechanical device with a textured base and a brush applying force (no text or symbols)

Technical diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Salida de aire

5 57 °C constantes

2 Mango

6 Caliente

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two downward arrows indicating flow or movement (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a laboratory instrument with labeled parts 1, 2, and 3

4 7 5 6 8 9

Two simple circular diagrams with internal lines, no text or symbols present

Diagram of a cylindrical device with internal granular structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Luftuttak

5 57° konstant

2 Håndtak

6 Varm

3 Avtakbart luftstrømfilter

7 Varm/kald-syklus

Two simple circular diagrams with dot patterns, no text or symbols present

Diagram of a cylindrical device with internal granular structure and two orange arrows indicating downward motion (no text or symbols)

NO

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Brusreduceringsdesign

Technical diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Luftutlopp

5 57° konstant

2 Handtag

6 Varm

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a textured base and a brush applying force (no text or symbols)

Technical diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

Two simple circular diagrams with dotted lines, no text or symbols present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

FI

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a laboratory apparatus with labeled parts 1, 2, and 3

4 7 5 6 8 9

1 Luftudtag

5 57° konstant

2 Håndtag

6 Varm

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two downward arrows indicating flow or movement (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a laboratory apparatus with numbered parts labeled 1, 2, and 3

4 7 5 6 8 9

1 Wylot powietrza

5 State 57^

2 Rączka

6 Goraco

Two simple circles with a small symbol inside, no text or labels present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

PL

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a laboratory apparatus with numbered components labeled 1, 2, and 3.

4 7 5 6 8 9

Two simple circles with a small circle labeled 'φ = μ' above them, no text or symbols present.

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Diagram of a laboratory apparatus with labeled parts 1, 2, and 3

לְרָה 57°
5

4 7 5 6 8 9

Simple diagram with two circles and a vertical line, no text or symbols present

Diagram of a cylindrical device with internal mesh structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Diagram of a mechanical device with Hebrew text label and directional arrow indicating movement or force

בְרָה בְרָה בְרָה

Diagram of a laboratory apparatus with labeled parts 1, 2, and 3

57 درجة منوية ثابتة

5

4 7 5 6 8 9

مخرج الهواء

1

ساخن

6

المبيض

2

Simple diagram with two circles and a dashed line, no text or symbols present

Diagram of a microfluidic device with internal mesh structure and two orange arrows indicating flow direction (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

Technical diagram of a handheld device with labeled parts 1, 2, and 3

4 7 5 6 8 9

Two simple circular diagrams with dotted lines, no text or symbols present

Diagram of a cylindrical device with internal granular structure and two orange arrows indicating downward motion (no text or symbols)

Diagram of a mechanical device with a brush applying material to a perforated cylindrical component (no text or symbols)

Technical diagram of a handheld device with labeled parts 1, 2, and 3

4 7 5 6 8 9

Two simple circular diagrams with a small circle labeled 'm' and a small circle labeled 'o' inside, no text or symbols present.

Diagram of a mechanical component with two downward arrows indicating force or direction (no text or symbols)

Diagram of a mechanical device with a brush applying material to a textured cylindrical component (no text or symbols)

QR code image with a central logo, likely linking to a digital resource or website.

For more details, please scan the QR code to obtain the electronic manual.

EAC

User manual version number: V 2.0

Service website: http://global.dreametech.com

Manufacturer: Dreame Trading (Tianjin) Co., Ltd.

Address: Room 2112-1-1, South District, Finance and

Trade Center, No.6975 Yazhou Road, Dongjiang Bonded

Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China

Made in China