DABMAN i420 - Radio Imperial - Free user manual and instructions

USER MANUAL DABMAN i420 Imperial

Thank you for purchasing the DABMANI42OBK. When you use the DABMANI42OBK for the first time, please read these instructions carefully, and retain them for reference in future. You will be able to fully enjoy the many functions of the radio only if you follow the instructions.

These operating instructions are part of the device! If you sell or pass on the device, please be sure to also pass on these operating instructions.

Intended use

This product is a consumer electronics device that serves as a receiver for DAB+ FM and Internet radio signals, for playback and recording of audio files from a USB data carrier and as a Bluetooth playback device. Any other operation or use of the product is considered improper and may result in personal injury or damage to property.

• Only use the product as described in this manual.
  • This product is intended to be used indoors.
  • The product is not intended for professional use.
• This product is intended to be only serviced by the manufacturer or a specialist.
• This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
• The warranty does not cover faults caused by incorrect handling, damage, assembly or attempted repairs. The same applies to normal wear and tear.

Main parts (image A)

1 Power and volume knob

Press the knob to switch the product on or to standby.

Turn left or right to adjust the volume output.

2 DAB/DAB+/FM Antenna

Telescope antenna to get DAB/DAB+/FM signal reception, adjust the length and direction to get good reception.

3 USB

Connect the product to a USB data carrier here to update the firmware if required. Or connect a USB data carrier such as a USB hard drive or USB stick here to play back music files or record radio programmes.

4 Audio out

Analogue audio output right/left: Connect the radio here to the analogue audio input of a hi-fi amplifier or to active loudspeakers to forward the music received from the radio to a sound system.

5 Optical digital audio output (TOSLINK)

Connect the radio here to the optical audio input of a hi-fi amplifier or to active loudspeakers in order to forward the music received from the radio to a sound system.

6 DC IN

Connect the power adaptor attached in the giftbox (5V/2A, Type-C) into the DC IN type-C connetor to supply the power.

Remote control (image B)

The product can be controlled using both the product buttons and the remote control. Using the remote control is the more convenient and simpler way to operate the product.

Note!

You can use the Soundmate app to operate your compatible Internet radio via tablet or smartphone. The app is suitable for both iOS and Android operating systems. (See also chapter Operation via app)

1 Standby button Switch the product on or off using this button.
2 Mode Switches between the various operating modes. This button can be programmed with a different function.

3 Mute Mutes the product's volume to silent.

4 EQ equalizer function Use this button to activate the equalizer function and change individual sound settings.

5 Back Press this button to go back one step in the menu.

6 Navigation up/down - left/right - Volume +/- Use these arrow keys to navigate through the menu. Use these arrow keys to increase or decrease the volume.

7 ENTER/OK This button is used to confirm an entry or selection.

8 LIST/Programme list Opens the radio programme list.

9 FAV+ Use this button to add a selected radio station to your favourites list.

10 Control and selection of music tracks via USB, UPnP or media Fast rewind: Select previous track / fast rewind Stop: Stops playback Playback: Starts or pauses a playback Fast forward: Select next track / fast forward

11 Info Shows information about the current radio programme.

12 Menu Use this button to activate the product's menu.

13 Rec Starts a recording of the current radio programme on a connected USB data carrier. Press and hold the button for longer than 2 seconds to activate the timer menu for recording a radio programme.

14 Numerical keypad 15 VOL + / VOL - Use these buttons to increase or decrease the volume.

16 Sleep Use this button to set a sleep timer. The radio switches off after the time period you have set.

Items supplied

Quantity Declaration
1 DABMANI420BK
1 Remote control
1 External power supply unit
1 Telescopic antenna
1 Cable for connections (Audio L/R/Coax)
1 Battery for remote control type CR2025/3V (already insterted in remote control)
1 Operating manual

SAFETY NOTICES

Please read the safety notices carefully before operating the product. Please note all warnings and instructions both on the product and in the operating manual.

Explanation of safety notices

You will find the following categories of safety notices in the operating manual:

This signal word indicates a hazard with a medium degree of risk that can result in death or serious injury if the warning is ignored.

This signal word indicates a hazard with a low degree of risk that may result in minor or moderate injury if the warning is ignored.

Instructions with the word NOTE will warn you of possible material or environmental damage. These notes contain special advice related to the economic operation of the receiver.

Basic safety notices

Choking hazard:

- Do not let children play with packaging material. Packaging materials can lead to choking and suffocation. Always keep the packaging material out of reach of children.

Electrical hazard:

• Never insert any object into the ventilation opening of the product. The product contains electrical components.
• Do not expose the product to water, rain, moisture, or high humidity.
• Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a vase.
• Do not use this product in environments where condensation may form. If the product is used in a warm, humid room, moisture or water droplets can build up inside, which may cause it to malfunction. If this happens, turn off the product and leave it unplugged for 1 to 2 hours to allow it to dry completely before turning it back on.
• Only power the product with the voltage corresponding to the markings on the product.
• Keep the product away from pets and other animals. Animals can bite through the power cable and suffer electrical shock.
• Do not open the product, there are no user serviceable parts inside.
• This product may only be serviced by a qualified technician for maintenance.

Fire hazard:

• Immediately unplug the product when any excessive heat, smoke, or any abnormal condition occurs.
• Do not place the product on top of other electrical equipment.
• Unplug the product from the power source and other equipment if problems occur.
• Do not overload electrical outlets or extension cords.
• Do not expose batteries to open flames or extreme heat, as they may explode.

Chemical burn hazard:

• Always keep batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Seek immediate medical attention when you suspect that batteries have been swallowed.
• In the event of a leaking battery, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• To prevent damage or injury from possible battery leakage, remove the batteries if the re-mote control will not be used for an extended period.

Risk of hearing loss:

- Excessive sound pressure when using earphones or headphones can lead to damage or loss of hearing. Do not listen with earphones or headphones at an increased volume over a longer period of time.

Risk of damaging the product:

• Use the product only in moderate climates. Avoid extremely cold or hot environments. The recommended operating temperature is between 0°C and 35°C.
• Only use attachments/accessories specified by the manufacturer.
• Make sure the power adapter cable is out of the way and does not bend near the connections. Do not pinch the cable, do not walk over it and do not place heavy objects onto the cable.
• Disconnect the product from the power outlet during lightning storms or before pro-longed periods of disuse.

Correct positioning:

• Make sure the product is placed on a flat and stable surface.
- Avoid placing the radio close to sources of heat, e.g. radiators, open fires, e.g. candles, or devices with strong magnetic fields, e.g. loudspeakers.
- Do not place any containers with liquids (e.g. vases) on the radio.
- Avoid places subject to direct sunshine or with a very high level of dust.
- Do not cover the ventilation openings. Always leave at least 5 cm of space around the product.

Risk of improper use:

- Do not use an USB extension cable because it can cause interference resulting in failing of data. Plug the USB memory stick directly into the product.

Correct handling of batteries:

• Do not charge non-rechargeable batteries.
• Batteries may contain poisonous substances. Batteries must be disposed of in accordance with current legal regulations and with consideration for the environment. Do not dispose of batteries in your domestic waste.
  • Always replace batteries by the same type.
• Ensure that the plus (+) and minus (-) poles are inserted correctly to avoid a short circuit.
• Remove leaking batteries from the appliance immediately and clean the contacts before inserting new batteries.
  • Store batteries in a cool and dry place.

INSTALLATION

Please remove the parts carefully from the packaging. Check whether all parts are present.

General operating instructions

• Switch the product on or off using the power and volume knob A①orthestandbybuttonB ①.
• Use the power and volume knob A① ortheVOL+buttonB to increase the volume.
• Use the power and volume knob A① ortheVOL-buttonB ⑮ to reduce the volume.
• The menu items can be selected using the power and volume knobA ①orthenavigationbuttonsB ⑥.
• Press the power and volume knob A① ortheOKbuttonB ⑦ to confirm a selection.

Preparing the remote control

Remove the battery transport lock on the remote control. To do this, pull out the plastic tab on the battery housing of the remote control.

This establishes the battery contact.

To replace the remote control battery, open the battery compartment on the back of the remote control. Pull the battery compartment out of the remote control. Remove the battery and insert a new battery of the same type.

rning!

There is a risk of explosion if batteries are used improperly! Read the safety instructions in chapter Safety notices and ensure that the battery polarity is correct! Then replace the battery compartment.

Power connection

Connect the power supply unit included in the scope of delivery to the corresponding socket on the back of the product. Now plug the mains adapter into a 230 V socket. Press the knob A① or the standby button B① on the remote control to switch on the product. The product starts up.

DISPOSAL INSTRUCTIONS

The symbol on the product, packaging or operating manual indicates this requirement. The materials used are recyclable as indicated by their markings. By recycling or otherwise re-using old products or their components you are making an important contribution to the protection of our environment. Please enquire from your local authorities where the appropriate recycling centre is located. Please ensure that spent batteries as well as electronic waste are not disposed of in your domestic waste, and are professionally recycled.

FEATURES AND TECHNICAL DATA

Internetradio
Audiocodecs MP3 (Bitrate bis	320 Kbits/s, sample rate up to 48 KHz) AAC/AAC+ (Bitrate bis 320 Kbits/s, sample rate up to 48 KHz) WMA (Bitrate bis 320 Kbits/s, sample rate up to 48 KHz)
DAB/DAB+/FM
Reception range DAB Band III	174 MHz- 240 MHz FM 87.5 MHz - 108.1 Mhz
Ton
Speaker	Non-build in speaker, an external speakers system required.
Display
TFT Color Display	3.2 inch IPS colour display
Connection
LAN portUSB portAudio outputPower adapter connection	RJ45USB 2.0 standard3.5 mm jack, Audio L/R/Coax; S/PDIF opticalType-C
Operating conditions
Temperature rangeAir humidity	0 °C - 35 °C20 - 80 relative humidity
Wi-Fi interface
Frequency rangeModulationIEEE Standards	2.412 GHz - 2.4835 GHz CCK, DGPSK, DBPSK, 64-QAM, 16-QAM, QPSK, BPSK IEEE 802.11b/g/n
Wi-Fi data rate802.11b:802.11g:802.11n:Transmission power	1, 2, 5.5, 11 Mbps6, 9, 12, 18, 24, 36, 48, 54 MbpsHT 20 to 72,2 MbpsHT 40 to 150 Mbps18.5 dBm (Max)
Storage conditions

Store in a cool dry place.
Dimensions and weight
Width x height x depth Weight	147 mm x 100 mm x 78 mm314 g
Battery Remote Control
Type CR 2025 3 V
Power adapter DABMANI420BK
Model name FJ-SW112S0502000E
Manufacturer Huizhou Fujia Appliance Tech. Co., Ltd. Building B of Yaoyu Ind. Park, Shatian Town, Huiyang District, Huizhou, Guangdong, P.R. China
AC input 100-240 V~ 50/60 Hz 0.4 A Max
Output 5V 2 A
Average operational efficiency	≥78.7%
Efficiency at minor power [10%]	/
Standby power consumption < 0.1 W
Max power consumption 10 W

GUARANTEE

Nedis B.V. offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

• It is not possible to send products that need repairs to Nedis B.V. directly.
• If this unit is opened or accessed by a non-official service centre in any way, the warranty expires.
• This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

DISCLAIMER

Updates to firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

DECLARATION OF CONFORMITY

We, Nedis B.V. declare as manufacturer that the product DABMANI420BK from our brand Imperial®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation, ErP 2009/125/EC regulation and the RoHS 2011/65/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: doc.nedis.com/en-us/DABMANI420BK

Betriebsanleitung

DABMANI420BK

EINFÜHRUNG

DÉCLARATION DE CONFORMITÉ

OMINAISUUDET JA TEKNISET TIEDOT

POKYNY NA LIKVIDÁCIU

Abstract network diagram with interconnected nodes and lines on a light blue gradient background (no text or symbols)

Nedis BV

Reitscheweg 1

5232 BX 's-Hertogenbosch

The Netherlands

[e-mail]