What to do if the Imperial DABMAN i560 CD radio is stuck on the startup screen with the Imperial logo?

Question

Accepted Answer

If your Imperial DABMAN i560 CD radio is stuck on the startup screen displaying only the "Imperial" logo, here are several steps to follow to try to resolve this issue:

1. Complete Restart

Unplug the radio from the power outlet.
Wait at least 2 minutes to allow the device to fully discharge.
Plug the radio back in and try to turn it on again.

2. Device Reset

Look for a reset button (often a small hole requiring a pointed object) on the radio.
Press it for a few seconds to perform a hardware reset.
If no button is present, try turning the radio completely off, then turn it back on after a few minutes.

3. Power Check

Ensure that the power outlet is working properly by testing it with another device.
Check that the power cable and adapter are not damaged.

4. Contact in case of failure

If after these steps the radio remains stuck, it may be a more serious hardware or software issue requiring technical intervention. You can then contact Imperial customer service or an authorized repair center for a thorough diagnosis.

User manual Imperial : user manuals and guides in PDF

Models Imperial most viewed

Browse manuals Imperial by appliance type

Recent questions about devices Imperial