Playpark - Toys BabyGO - Free user manual and instructions
Find the device manual for free Playpark BabyGO in PDF.
User questions about Playpark BabyGO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Toys in PDF format for free! Find your manual Playpark - BabyGO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Playpark by BabyGO.
USER MANUAL Playpark BabyGO
natural_image
Abstract logo design with a stylized lowercase 'b' inside a cloud-like frame, no text or symbols present.PLAYPARK
Playpark - Laufgitter
MONTAGEANLEITUNG
Playpark - Playpen
ASSEMBLY INSTRUCTIONS
Playpark - Parc
MANUEL D'INSTRUCTIONS

BabyGo Baby Products GmbH
Am Bahndamm 1-3
natural_image
Line drawing of a rectangular metal frame with internal compartments and supports (no text or symbols)DE
BEDIENUNGSANLEITUNG
Liebe Eltern:
natural_image
Assorted metallic cylindrical components laid out on a light surface, including clamps and a jacket (no text or symbols visible)DE
正
单位

babyGO
MONTAGESCHRITTE
natural_image
Close-up of a metallic mechanical component with a cylindrical cap and flange, placed on a textured surface (no visible text or symbols)
natural_image
Person holding a mug with hands clasped (no visible text or symbols)
text_image
747mm 897mm 747mmPLAYPARK

natural_image
Exterior view of a rectangular metal frame structure with a 620mm dimension label (no other text or symbols)natural_image
Interior view of a modular furniture unit with labeled compartments D and C (no text or symbols on the main structure)natural_image
Exterior view of a modern office building (no signage)natural_image
Line drawing of a rectangular metal frame with internal compartments and supports (no text or symbols)EN
INSTRUCTION MANUAL
Dear Parents:
Thank you for purchasing the playpen.
Please read and follow all instructions before using the playpen.
WARNING! Read the Instruction carefully before use and keep them for future reference.
PLAYPARK
PARTS

natural_image
Assorted metallic cylindrical components laid out on a light surface, including clamps and plastic bags (no text or symbols visible)DE
EN
无法识别

babyGO
ASSEMBLY STEP
- Install the bottom tubes, short sides with length 747MM, long sides with length 897MM. Please note the plastic parts from figure A in middle, and the plastic parts from figure B in corners.

natural_image
Close-up of a metallic pipe fitting with a cylindrical component, placed on a textured surface (no visible text or symbols)
natural_image
Close-up of hands holding a small cylindrical object (no visible text or symbols)
text_image
747mm 897mm 747mm
natural_image
Black rectangular frame with a 620mm measurement label, no other text or symbols visible
natural_image
Interior view of a modular baby crib with labeled compartments D and C (no text or symbols on the crib itself)
natural_image
Exterior view of a modern office building (no signage)PLAYPARK
-
Install legs which length is 620MM.
-
Install hand rails, steel tubes length are same as bottom. Please note first install part C, then install part D, then zip the zippers on hand rails.
-
The installation finish.

babyGO
PLAYPARK
IMPORTANT
READ CAREFULLY AND READ CAREFULLY AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
- WARNING: Do not place the playpen close to an open fire or other heat source.
- WARNING: Do not use the playpen without the base.
- Attention that the risk of leaving anything in the playpen which could provide a foothold or create a danger of suffocation or strangulation;
- All assembly fittings should always be tightened properly;
- Not to use the playpen if any part is broken, torn or missing and use only spare parts approved by the manufacturer;
- Accessories which are not approved by the manufacturer shall not be used;
• Maximum age of child:3 years old/15KGS.
CLEANING & MAINTENANCE
Easily washable with a damp cloth. No parts of the playpen need lubrication or adjustment. Dry the steel tubes to prevent them from rusting.

babyGO

natural_image
Line drawing of a rectangular metal frame with internal compartments and supports (no text or symbols)FR
MANUEL D'INSTRUCTIONS
Chers parents:
natural_image
Assorted metallic cylindrical components laid out on a light surface, including a jacket, cloth, and plastic parts (no visible text or symbols)DE
129
FR

babyGO
ÉTAPE DE MONTAGE
natural_image
Close-up of a metallic T-shaped connector with a cylindrical port, placed on a white surface with a mesh mesh background (no text or symbols visible)
natural_image
Person holding a ceramic cup, wearing gloves and a white top (no visible text or symbols)
text_image
747mm 897mm 747mm
natural_image
Exterior view of a rectangular metal frame with a 620mm dimension label (no other text or symbols)
natural_image
Interior view of a modular baby tray with labeled compartments D and C (no text or symbols on the tray itself)