WS9074MG - Basket Atag - Free user manual and instructions

USER MANUAL WS9074MG Atag

3D rendering of a stainless steel kitchen chimney (no text or symbols visible)

GEBRUIKSAANWIJZING

Afzuigkap

NL

WS9074MG

ES1074MG

Two black rectangular icons: a plus sign and two gray circular icons with symbols (no text or labels)

1. Raakde+(plus)toetsaan.

Simple white circular graphic with a half-circle and radiating lines on a black background (no text or symbols)

1. Raakkortdeverlichtingstoetsaan.

Simple circular graphic with a white semicircle and radial lines on a dark background (no text or symbols)

Two black-and-white icons: a pie chart and a 12-pin display with wireless signals (no text or symbols)

Digital display showing 'U' with icons for grid, Wi-Fi, and radio on dark background

Pure technical line drawing of a mechanical component or bracket (no text or symbols)

Isometric line drawing of a rectangular frame with internal horizontal and vertical lines, no text or symbols present.

Illustration of a hand reaching toward a large screen with blurred background figures (no text or symbols)

graph TD
    A["Top Layer"] --> B["Middle Layer"]
    B --> C["Bottom Layer"]
    C --> D["Recycle to Bottom"]
    D --> E["Recycle to Top"]
    E --> F["Recycle to Middle"]
    F --> G["Recycle to Top"]
    G --> H["Recycle to Bottom"]

Diagram illustrating airflow or ventilation process with warning symbol and magnified detail view

Verlichting

WAARSCHUWING!

Isometric technical diagram of a mechanical assembly with directional arrows indicating movement or force (no text or symbols present)

2

Diagram illustrating a 3D mechanical assembly with tool, arrows indicating movement, and two inset images showing cylindrical components.

3

Technical diagram illustrating a mechanical assembly with labeled components and directional arrows indicating process steps.

Diagram illustrating a mechanical assembly with labeled parts and a hand holding a tool, accompanied by an inset showing screw thread arrangement.

4

Technical diagram showing mechanical assembly with screws and a pipe connection, annotated with directional arrows and dashed lines indicating alignment or assembly.

5

1 D

6

2 G G

7

1

Technical diagram showing mechanical assembly with labeled component '2' and directional arrow

Technical diagram showing a hand operating a tool on a mechanical component, with a close-up of the assembly detail including a 3 mm dimension label.

8

Technical diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

9

Technical diagram illustrating four different mechanical assembly steps with numbered components and directional arrows indicating motion.

Installatie

10

Technical diagram showing mechanical assembly with two labeled components and a close-up of screw parts, including inset images of washers.

11

Illustration of hands operating a cylindrical device with an upward arrow, no text or symbols present

12

Technical diagram showing a mechanical component with arrows indicating assembly or movement, and an inset image of two bolts labeled 'SHE' (screw type) with directional arrows.

Eilandafzuigkappen

1 A A 28 23

2

3 Ø 8 A

4 C B

Installatie

5

1 D

6

2 G G

7

H F

8

Technical diagram showing cross-sectional views of a mechanical device with labeled components and directional arrows indicating assembly or operation.

9

E E

10

Technical diagram of a mechanical assembly with labeled parts (B, C, G) and directional arrows indicating flow or movement.

11

Diagram illustrating a mechanical assembly with labeled components A and B, showing a downward force on the internal structure.

12

3 click 4 B C 2 1

13

Technical diagram of a mechanical device with labeled parts (D, B) and corresponding screw assembly diagrams.

14

L 1 M 2 M

15

A H

16

Illustration of a hand using a cable to lift a cylindrical component, with no visible text or symbols.

17

F 1 B 2 F F

Warning symbol for a trash bin with crossed x and y lines, indicating no waste or discharge.

3D rendering of a stainless steel kitchen chimney (no text or symbols visible)

NOTICED'UTILISATION

Hotteaspirante

FR

WS9074MG

ES1074MG

Tablesdesmatières

Two black rectangular icons: a plus sign and two gray circular indicators with icons for smart devices (no text or symbols)

Simple circular graphic with a white semicircle and radial lines on a black background (no text or symbols)

Simple circular graphic with a white half-circle and radiating lines on a dark background (no text or symbols)

Wi-Fi/appConnectLife

graph TD
    A["Top Row: Column with Vertical Bars"] --> B["Bottom Row: Column with Vertical Bars"]
    B --> C["Top Row: Column with Unrolled Bars"]
    C --> D["Unrolled Section: Column with Unrolled Bars"]
    D --> E["Top Row: Column with Unrolled Bars"]
    E --> F["Unrolled Section: Column with Unrolled Bars"]
    F --> G["Top Row: Column with Unrolled Bars"]
    G --> H["Unrolled Section: Column with Unrolled Bars"]

graph TD
    A["警告"] --> B["操作步骤1"]
    B --> C["操作步骤2"]
    C --> D["操作步骤3"]
    D --> E["操作步骤4"]
    E --> F["操作步骤5"]
    F --> G["操作步骤6"]
    G --> H["操作步骤7"]
    H --> I["操作步骤8"]
    I --> J["操作步骤9"]
    J --> K["操作步骤10"]
    K --> L["操作步骤11"]
    L --> M["操作步骤12"]
    M --> N["操作步骤13"]
    N --> O["操作步骤14"]
    O --> P["操作步骤15"]
    P --> Q["操作步骤16"]
    Q --> R["操作步骤17"]
    R --> S["操作步骤18"]
    S --> T["操作步骤19"]
    T --> U["操作步骤20"]
    U --> V["操作步骤21"]
    V --> W["操作步骤22"]
    W --> X["操作步骤23"]
    X --> Y["操作步骤24"]
    Y --> Z["操作步骤25"]

Éclairage

ATTENTION!

Isometric technical diagram of a mechanical assembly with directional arrows indicating movement or force (no text or symbols present)

2

Diagram illustrating a 3D mechanical assembly with tool and component placement, showing progressive assembly from base to final assembly.

3

Technical diagram illustrating a mechanical assembly with labeled components and directional arrows indicating process steps.

Diagram illustrating a mechanical assembly with labeled parts and a hand holding a tool, accompanied by an inset showing screw thread arrangement.

4

Technical diagram showing mechanical assembly with screws and a pipe connection, annotated with directional arrows and dashed lines indicating alignment or assembly.

5

1 D

6

2 G G

7

1

Technical diagram showing mechanical assembly with labeled component '2' and directional arrow

Technical diagram showing a hand operating a tool on a mechanical component, with a close-up of the assembly detail including a 3 mm dimension label.

8

Technical diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

9

Technical diagram illustrating four different mechanical assembly steps with numbered instructions and labeled components.

Installation

10

Technical diagram showing mechanical assembly with two labeled components and a close-up of screw parts, including inset images of washers.

11

Illustration of hands operating a cylindrical device with an upward arrow, no text or symbols present

12

Technical diagram showing a mechanical component with arrows indicating assembly or movement, and an inset image of two bolts labeled 'SRB' with arrows pointing to the components.

Hottesd'îlot

1 A A 28 23

2

3 Ø 8 A

4 C B

Installation

5

1 D

6

2 G G

7

H F

8

Technical diagram showing cross-sectional views of a mechanical device with labeled components and directional arrows indicating assembly or movement.

9

E E

10

Technical diagram of a mechanical assembly with labeled parts (B, C, G) and directional arrows indicating motion or flow.

11

Diagram illustrating a mechanical assembly with labeled components A and B, showing a downward force on the internal structure.

12

3 click 4 B C 2 1

13

Technical diagram of a mechanical device with labeled parts (D, B) and corresponding screw assembly diagrams.

14

L 1 M 2 M

15

A H

16

Illustration of a hand using a cable to lift a coil, with no visible text or symbols.

17

F 2 1 B F F

Warning symbol for a trash bin with crossed lines indicating no waste, and a black rectangle below.

3D rendering of a stainless steel kitchen chimney (no text or symbols visible)

GEBRAUCHSANWEISUNG

Abzugshaube

DE

WS9074MG

ES1074MG

Two black rectangular icons: a plus sign and two gray circular indicators with icons for smart devices (no text or symbols)

Simple black-and-white graphic with a white semicircular shape and radial lines on a dark background (no text or symbols)

Simple circular graphic with a white semicircle inside a dashed border on a dark background (no text or symbols)

Simple white circular icon with a lightning bolt inside, on a dark background (no text or symbols)

Digital display showing a grid, '0', and Wi-Fi icons on a dark background

WLAN/ConnectLife-App

Three technical diagrams showing structural components with no visible text or symbols

graph TD
    A["Top Row: Column with Vertical Bars"] --> B["Bottom Row: Column with Vertical Bars"]
    B --> C["Top Row: Column with Unrolled Bars"]
    C --> D["Unrolled Section: Column with Unrolled Bars"]
    D --> E["Top Row: Column with Unrolled Bars"]
    E --> F["Unrolled Section: Column with Unrolled Bars"]
    F --> G["Top Row: Column with Unrolled Bars"]
    G --> H["Unrolled Section: Column with Unrolled Bars"]

graph TD
    A["警告"] --> B["操作步骤1"]
    B --> C["操作步骤2"]
    C --> D["操作步骤3"]
    D --> E["操作步骤4"]
    E --> F["操作步骤5"]
    F --> G["操作步骤6"]
    G --> H["操作步骤7"]
    H --> I["操作步骤8"]
    I --> J["操作步骤9"]
    J --> K["操作步骤10"]
    K --> L["操作步骤11"]
    L --> M["操作步骤12"]
    M --> N["操作步骤13"]
    N --> O["操作步骤14"]
    O --> P["操作步骤15"]
    P --> Q["操作步骤16"]
    Q --> R["操作步骤17"]
    R --> S["操作步骤18"]
    S --> T["操作步骤19"]
    T --> U["操作步骤20"]
    U --> V["操作步骤21"]
    V --> W["操作步骤22"]
    W --> X["操作步骤23"]
    X --> Y["操作步骤24"]
    Y --> Z["操作步骤25"]

Beleuchtung

⚠️ WARNING!

Isometric technical diagram of a mechanical assembly with directional arrows indicating movement or force (no text or symbols present)

2

Diagram illustrating a 3D mechanical assembly with tool, arrows indicating movement, and two inset images showing cylindrical components.

3

Technical diagram illustrating a mechanical assembly with labeled components and directional arrows indicating process steps.

Diagram illustrating a mechanical assembly with labeled parts and a hand holding a tool, accompanied by an inset showing screw thread arrangement.

Installation

4

Technical diagram showing mechanical assembly with screws and a close-up of a bolted joint, annotated with directional arrows and dashed bounding boxes.

5

1 D

6

2 G G

7

1

Technical diagram showing mechanical assembly with labeled component '2' and directional arrow

3 3 mm

8

Technical diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

9

Technical diagram illustrating four different mechanical assembly steps with numbered instructions and labeled components.

10

Technical diagram showing mechanical assembly with two labeled components and a close-up of screw parts, including inset images of washers.

11

Illustration of hands operating a cylindrical device with an upward arrow, no text or symbols present

12

Technical diagram showing a mechanical component with arrows indicating assembly or movement, and inset images of two bolts labeled 'S16' and 'S26'.

Inselhauben

1 A A 28 23

2

3 Ø 8 A

4 C B

5

1 D

6

2 G G

7

H F

8

Technical diagram showing cross-sectional views of a mechanical device with labeled components and directional arrows indicating assembly or movement.

9

E E

10

Technical diagram of a mechanical assembly with labeled parts (B, C, G) and directional arrows indicating flow or movement.

11

Diagram illustrating a mechanical assembly with labeled components A and B, showing a downward force on the internal structure.

12

3 click 4 B C 2 1

13

Technical diagram of a mechanical device with labeled parts (D, B) and corresponding screw assembly diagrams.

14

L 1 M 2 M

15

A H

16

Illustration of a hand using a cable to press down a cylindrical component, with no visible text or symbols.

17

F 1 2 B F F

Warning symbol for a trash bin with crossed lines indicating no waste or discharge, and a black rectangle below.

3D rendering of a stainless steel kitchen chimney (no text or symbols visible)

INSTRUCTIONSFORUSE

Cookerhood

EN

WS9074MG

ES1074MG

Contents

3Pictogramsused......

4Safety......

4.....Replacingtheodour/particulatematters...

7YouPc&kerhood....

7Dearcustomer!......

8Descriptionuserinterface......

8Cookerhoodfunctions......

9Operation....

9Switchingextractiononandoff......

9Switchontheboostsetting......

9Switchingonautomaticdelayedshut-off.....

10Switchingthelightonandoff......

10Changingthecolourtemperature......

10Recirculationuse......

10Switchingontherecirculationfunction......

10Switchofftherecirculationfunction......

11 CleTipA for energy-efficient cooking with .....

11 Activordede....

12

13Wi-Fi-connectivity......

13Wi-Fi/ConnectLife-app......

17Maintena

17Cleaning.

18

19Lighting...

20Technica

20EUProduc

21EUProduc

21Compliant

22Installatic

22......

24Preparatic

24Electrical

25Appliance

26Built-in.....

37Environn

37

37Disposalo

38Yournote

Making the connection between cooker hood and hob....

The following symbols are used throughout the manual, and they have the following meanings:

INFORMATION!

Information, advice, tip, or recommendation

WARNING!

Warning-general danger

ELECTRICSHOCK!

Warning-dangerofelectricshock

HOTSURFACE!

Warning-dangerofhotsurface

DANGEROFFIRE!

Warning-dangeroffire

It is important that you carefully read the instructions.

WARNING!

READCAREFULLYANDKEEPITFORFUTUREREFERENCE!

Safeuse

- This appliance is only designed for household use.

- CAUTION: Accessible parts may become hot when used with cooking appliances.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in asafeway and understand the hazards involved.

- Donotallowchildrentoplaywiththeappliance.

- Donotallowchildrentocleanormaintaintheapplianceunless supervised.

•Alwaysprovideadequateventilation!

- Thereshallbeadequateventilationoftheroomwhentherange hoodisusedatthesametimeasappliancesburninggasorother fuels.

- Whentherangehoodandappliancesuppliedwithenergyother thanelectricityaresimultaneouslyinoperation,thenegative pressureintheroommustnotexceed4Pa(4×10 -5 bar).

- Localregulationsconcerningthedischargeofairhavetobe fulfilled.

- Neveruseapressurecleanerorsteamcleanertocleanthe appliance.

ELECTRICSHOCK!

Avoidtheriskofelectricshock;makesuretheapplianceis switchedoffbeforecleaningtheappliance.

- Onlyusetheapplianceinsidethehome.

• Donotusethecookerhoodifthegreasefilterhasnotbeenfitted properly!
• Donotleanagainstthecookerhood.
• Neverusethecookerhoodasaworkingsurfaceunlesssthisis indicatedexplicitly.
• Grease and oil are inflammable when overheated. Remain in the cooking area when preparing meals.
• Topreventhotfatfromcatchingfire,youshouldonlydeep-fry undercontinuoussupervision.
• Thecookerhoodshouldbecleanedregularlybothontheoutside aswellastheinside(atleast1xpermonth).Insufficientcleaning oradelayinthereplacementoffilterscancauseafirehazard.
• Cleanthefiltersontime.
• Thegreasefilterscanbecomehotduringuse. Aftercookingwait at least 30 minutes before cleaning.
• Plesenote!Intensiveusecanleadtocondensationonthe cookerhood.Condensationissimpletoremovewithadrycloth.
• Followtheinstructionsinthemanualforcleaningorreplacingthe greasefiltersand/orcarbonfilters!

DANGEROFFIRE!

Thereisariskoffireiftheinstructionsforcleaningorreplacing greasefiltersand/orcarbonfiltersarenotfollowed.

Throughgreasedepositsinthemetalgreasefilter.Neverwork withopenflameundertheappliance(eg.flambéing).Alwaysuse theappliancewiththemetalgreasefilter.Cleanthegreasefilter regularly.

Throughoverheatedfatoroil. Neverextinguishafirewithwater; alwaysuseafireblanket, lidorplate.

- The appliance may have sharpedges; please be careful during cleaning.

Safety

• ThelightemittedbyLEDlightsisverydazzlingandcandamage theeyes.DonotlookdirectlyintotheswitchedonLEDlightsfor longerthan100seconds.
• Whenwashinggreasefiltersinthedishwasheritisrecommended touseashort,non-intensiveprogramme.Checkthegreasefilter afterwashinginthedishwasherforwear(loosematerial).Wear canoccurasaresultoffrequentwashing.Ifloosematerialis visible,replacethefiltersinordertopreventthisloosematerial fromendingupinthefoodthatiscooked.
• Donotusetheapplianceintemperaturesbelow5°C.

Dearcustomer!

Pleasereadtheoperatinginstructionsbeforeuse. Theyincludegeneraltips,informationaboutthe settingsandadjustmentsyoucanmake,andthebestwaytotakecareofyourappliance.

TIP!

You can find them most recent version of the instructions for use on our website.

Enjoyyourcooking!

Descriptionuserinterface

1 2 3 4 5 6 7 8 9

1. Switchingon/offanddimmingthelighting
2. Reducingairextractioncapacityandswitchingoff
3. Greasefilterandcombifiltercleaningindicator
4. Proximity sensor
5. Displaystatus
6. Proximity sensor
   7.Wi-Fi
7. Switching on and increasingairextractioncapacity
   9.Switchonautomaticdelayedshut-off

Cookerhoodfunctions

Recirculation

Ifitisnotpossibletodischargetheairtotheoutsideviaanexhaustduct,youcanchoosetofilter theextractedairandblowitbackintothekitchen,therecirculationsystem.Whenusingthe recirculationsystem,theairafterpassingthegreasefiltersispurifiedbyacombi-filterandblown backintothekitchen.Thissystemisenergyefficientbecausenowarmairisdischargedtothe outside.

If you usethere circulationsystem, you should activate the 'Filtercleaning indicator' described in the 'Maintenance' paragraph.

Activemode

Theproximitysensordetectsauserstandinginfrontofthehoodandwillilluminatetheicons.

Automaticdelayedshut-off

Thetime-controlleddelayedshut-offensuresthatthelastcookingvapoursarestillextracted. Thedelayedshut-offmodeswitchesoffautomaticallyafter10minutes.

CleanAirfunction

TheCleanAirfunctionswitchonautomaticallyfor10minutesevery24hoursatthelowestspeed setting.

Switchingextractiononandoff

Two black rectangular icons: a white plus sign and two gray circular icons with icons for smart devices (no text or symbols)

1. Touchthe+(plus)key.

- Thecookerhoodwillswitchonatthelowestsetting.

1. Touchthe+(plus)keyforahigherfansetting.Touchthe+(plus)keyfor2secondstoselectthehighestsetting(boost)(see'Switch ontheboostsetting').
2. Touchthe—(minus)keytoselectalowersetting.

- Theextractionsettingcanbereadinthedisplay.

- Theextractionsettingcanbesetbetweenspeedslevel1to5.

1. If the extraction setting is set at 1, you can switch to the cooker hood by touching the minus key.
2. Touchthe—(minus)keyforatleast2secondstoswitchoffthe cookerhood.

Switchontheboostsetting

+ b

1. Touchthe+(plus)keyforatleast2seconds.

- The boost setting (setting 'b') is switched on for 10 minutes. Thedisplaywillflashduringthisperiod. Theoriginalextraction settingwillbereactivatedafterthisperiod.

1. Shorttouchthe-(minus)keytoswitchofftheboostsetting.

NOTE!

Boostisnotavailableinrecirculationmode.

Switchingonautomaticdelayedshut-off

Simple white pie chart icon on black background (no text or symbols)

1. Touch the automatic delayed shut-off key.

2. Theautomaticdelayedshut-offindicatorwillflash.

3. Thecookerhoodwillswitchoffautomaticallyafter 10minutes.

4. Switchoffautomaticdelayedshut-offbytouchingarandomkey (exceptthelightingkey).

NOTE!

If the boost setting has been selected, the timer function cannot be activated.

Switchingthelightonandoff

Simple circular graphic with a white half-circle and radiating lines on a black background (no text or symbols)

1. Shorttouchthelightingkey.

- Thelightingchangesfrommaximumtominimumstrengthand viceversa.

1. Longtouchthelightingkeytosetthelightingstrength.
2. Shorttouchthelightingkeytoturnoffthelight.

Changing the colour temperature

Youcanadjustthelightingtemperature.

1. Long touch the lighting key and simultaneously the – (minus) key to make the light 'colder' or the+(plus)keytoselecta'warmer'light.

Recirculationuse

NOTE!

Ondelivery, this cooker hoodissetforexhaustairtotheoutside. The hoodcanalsobesetto recirculationuse (the airisblownbackintotheroomafterfiltrationthroughgreasefiltersanda combi-filter).

WithanRMSkit(recirculationmodificationset), the air will first be cleaned by the grease filters, and then odours will be filtered by the combi-filter. The cleanedair is recirculated back into the kitchen.

Switchingontherecirculationfunction

Simple white pie chart icon on black background (no text or symbols)

1. Continuouslytouchthetimerkeyandthelightingkeysimultaneously untilthefilterindicatorflashes3times.

- Thecookerhoodissetforrecirculationuse.

Simple circular graphic with a white half-circle and radiating lines on a dark background (no text or symbols)

Switchofftherecirculationfunction

1. Simultaneously shorttouch the timer key and the lighting key until the filter indicator stay on.

CleanAirfunction

Digital display icons including a pie chart, a grid, an LCD screen, and wireless signals

TheCleanAirfunctionallowsyoutofreshentheairinyourkitchenforamaximumof24hoursatlevel1.

1. Switchoffthecookerhood.

2. Touch the timer key for approximately 3 seconds.

- Thecookerhoodwillswitchonautmaticallyfor10minutes everyhouratthelowestspeedsetting.Duringextraction,the displaywillshowafast-moving'snake'.Whenthehoodswitches offafter10minutes,thedisplaywillshowaslow-moving'snake' untilthehoodswitchesonagainafter50minutes.

1. SwitchofftheCleanAirfunctioninthemeantimebytouchinga randomkey(anykeyotherthanthelightingkey).

Activemode

Theproximitysensordetectsauserstandinginfrontofthehoodandwillilluminatetheicons.

Disabletheactivemode

Digital display showing 'U' with grid icon, Wi-Fi signal, and circular buttons below

1. Simultaneouslytouchthe+(plus)keyandtimerkeyfor3seconds.

• Theactivemodeisdisabled.
• Thedisplayshowsastatic 'U'.

Enabletheactivemode

1. Simultaneouslytouchthe+(plus)keyandtimerkeyfor3seconds.
   • Theactivemodeisenabled.
2. Thedisplayshows3timesablinking‘U’.

Operation

Making the connection between cooker hood and hob

Tooperatethecookerhoodwiththehob,youmustmakeaconnectionbetweenthehobandthe hood.

Tomaketheconnection, the Connection setup mode of the cooker hood and the hob must be activated.

See also the manual for the hob. Check our website for the full range of Hob that can be connected to your cooker hood.

1. The hood and lights must be switched off.

2. Touchandholdsimultaneouslythe-(minus:keyandthe+(plus:keyfor3seconds.

- The lighting key, the + (plus) key, the – (minus) key and the timer key will flash simultaneously for a maximum of 3 minutes.

1. On your hob, activatethepairingmodeintheusermenu(seethehobmanual)

• The connection to the hobis established.

1. If the connection is successful, the cookerhood will return to standby.

NOTE!

When manually operating the hood in connection mode, the pairing will belost and must be paired again.

Wi-Fi/ConnectLife-app

The appliance is fitted with a Wi-Fi module that allows the appliance to connect to a mobile device such as a smartphone or tablet. It offers a monitor the appliance status via a mobile device.

NOTE!

Themonitoringfunctionviamobiledeviceshallnotbeusedtoreplacethepersonalsupervision ofthecookingprocessdirectlyontheappliance.

Requirements:

• To use the Wi-Fi connectivity of the appliance, the range of your Wi-Fi router must extend to the appliance. The appliance only supports 2.4GHz networks. If during the connection setup, your homenetwork is not shown, check their outersettings for 2.4GHz, that thenetwork is no hidden, and the signal is strong enough.
• Additionally, amobiledevicewithaninstalledConnectLife-appendaregistereduseraccount isrequired(seechapter'ConnectLife-app').

ConnectLife-app

The ConnectLife-app is available on the Apple App Store and Google Play Store. After pairing with the appliance, the app can be used to monitor the status of the appliance.

Gotowww.connectlife.io/getstartedtodownloadtheConnectLife-app,informationaboutthesystem, supportandavailablefeatures.Findadditionaloptionsunderwww.connectlife.io.

GettingstartedwiththeConnectLife-app

Get started with your ConnectLife-app in 3 easy steps. Please check as addition chapter "First steps to setup the Wi-Fi connectivity". More help under www.connectlife.io/getstarted.

1. Registration:

•InstalltheConnectLife-app.
- Starttheapp.
- Choose "Get Started" and follow the process.
- If you are already registered, use the "Sign In" option.

2.Addtheappliance:

• Intheapp:Goto"Appliances".
• Choose "Add Appliances" or touch the + (plus) key.
• Make sure Wi-Fi on the appliance is turned ON and the appliance is in Connection Setup Mode(seeasaddition'FirststepstosetuptheWi-Ficonnectivity').
• FollowtheinstructionsoftheConnectLife-app.

3.Startcooking:

Congratulations, you can now start using ConnectLifetogether with your appliance.

FirststepstosetuptheWi-Ficonnectivity:

Within the following steps, the "Connection setup" is performed:

1. Checkthe "Requirements" as described above.
2. The hood and lights must be switched off.
3. Touchandholdsimultaneouslythe-(minus)andtimerkeyfor 3secondstoentertheWi-Fimenu.The'Light'iconwillbeturned off.
4. Touchandholdsimultaneouslythe-(minus)andtimerkeyfor 3secondstoturnonWi-Fi.'o'willblink3times.Wi-Fisymbolwill blink.
5. Touchandholdsimultaneouslythe+(plus)andtimerkeyfor 3seconds. Thedisplaywillshowan'C'. Confirmwiththetimerkey tostartthe'Connectionmenu'. Thismodewillbedisabled automaticallyafter5minutes.
6. In the ConnectLife-app, select the option 'AddAppliance' and follow the instructions.
7. If the ConnectLife-app does not connect to the device, wait 10 minutes and repeat the steps described.
8. Optionally: Whentheprocesswassuccessful, and you want topair another user, you can us the Pairing mode of the Wi-Fimenu and the Pairing or Discovery option of the Connect Life-app.

INFORMATION!

TroubleshootquicklybyturningtheWi-Fimoduleoffandonagain.Youcanfindmorehelpinthe "Wi-Fitroubleshooting"section.

DependingontheWi-Fistate,thereare1to3optionsavailableinthemenu:

•TheConnectionSetupMode
•ThePairingMode
- Remotecontrolmode

If more than 1 option is available then us the + (plus) and - (minus) keystotoggle between the options.

ConnectionSetupMode

The appliance must be connected to the Cloud for the application to monitor and control the appliance remotely.

'C' is shown on the display. Touch the timer key to enable 'Connection Setup Mode'. The Wi-Fi symbol willflash.Thismodewillbedisabledautomaticallyafter5minutes.

PairingMode

Bypairing,yougainmonitoringfunctionalityinsidetheConnectLife-app.Duringpairing,youconnect yourappliancetoyourConnectLifeuseraccount.

PairingModeisonlyavailableiftheWi-Ficonnectivitysetuphasbeenperformed.

'P' is shown on the display. Touch the timer key to enable 'Pairing mode'. The Wi-Fi symbol will flash. Thismodewillbedisabledautomaticallyafter3minutes.

On the ConnectLife-app, use the 'Pairing' or 'Discovery' option of the ConnectLife app to pair another user.

Remotecontrolmode

Tochangefunctionsettingsremotely,theappliancemustbeswitchedon,andtheConnectLife-app mustbeenabled.

'c' is shown on the display. Remote control mode is only available if the Wi-Fi connectivity setup has been performed. Touchthetimerkeytoenable 'Remotecontrol'.

Blinking'c':Remotecontrolisenabled.

Static'c':Remotecontrolisdisabled.

To close the Wi-Fi menu, touch and hold the – (minus) key for 3 seconds. If no key is touched within 10minutes,theWi-Fimenuwillbeswitchedoffautomatically;thehoodwillbebackinstandbymode.

Wi-Fimenu

To access the Wi-Fi menu, the hood must be on standby. Touch and hold simultaneously the – (minus) keyandtimerkeyfor3seconds.DependingontheWi-Fistate,thereare1to3optionsavailablein the menu: 'C', 'P', and 'c'. If more than 1 option is available, then use the + (plus) and – (minus) keys totogglebetweentheoptions.Confirmtheselectedoptionbytouchingthetimerkey.

SwitchingonWi-Fi:

•Thehoodmustbeswitchedoff.

- Touch and hold simultaneously the – (minus) and timer key for 3 seconds to enter the Wi-Fi menu. The 'Light' icon will be turned off.

- Touch and hold simultaneously the – (minus) and timer key for 3 seconds to turn on Wi-Fi. 'o' willblink3times.Wi-Fisymbolwillblink.

SwitchingoffWi-Fi:

•Thehoodmustbeswitchedoff.

- Touch and hold simultaneously the – (minus) and timer key for 3 seconds to enter the Wi-Fi menu. The 'Light' icon will be turned off.

- Touch and hold simultaneously the – (minus) and timer key for 3 seconds to turn off Wi-Fi. 'o' willbestaticenlightened. TheWi-Fisymbolwillturnoff.

DisplayingtheWi-Fistatus:

•Wi-Fimoduledisabled:Wi-Fisymbolnotdisplayed.

-Configurationinprogress:Wi-Fisymbolflashes.

- Connectedtohomenetworkrouter:Wi-Fisymbolflashes.

- Connectedtohomenetworkrouterandcloud:Wi-Fisymbolcontinuouslylit.

Wi-Fitroubleshooting

		SolutionPossiblecauseSymptom
	Wi-Fiturnedoff.Wi-Fiiconnotsh	SwitchonWi-Fi(see'Switchingon Wi-Fi').
	Homenetworkissues.Wi-Fisetup	Chieldhatyourhomenetworksignal isstrongandinternetconnectionis working.
Homenetworkisnot displayedduringconnection setup.	Thehomenetworkisnoton 2.4GHz,thenetworkis hidden,orthesignalstrength istoowek.	Pleasecheckthenetworksettings.Ensurea2.4GHzandvisiblenetwork.Ifthesignalistoowek,trytomovethe networkrouterclosertotheappliance.
Applianceisshown disconnectedonthemobile app.	Wi-Fiisdisabledorhome networkissues.	EnsurethatWi-Fiisenabledandthe internetconnectioninyourhome networkisworking.Repeatthe connectionsetupifnecessary.
	Differentcauses.OtherWi-Fipro	FiletdisabletheWi-Fiandenableit again.Checkthattheinternet connectioninyourhomenetworkis working.Repeattheconnectionsetup ifnecessary.Furthertroubleshootingavailableon www.connectlife.ioorcontactthe servicedepartment.

Cleaning

WARNING!

Important!For all maintenance, first, switch off themains power to the cooker hood by pulling the plug out of the socket or by turning off the home's masters switch. The hood need stobe cleaned regularly, both inside as well as outside (at least as often as the grease filter).

Donotuseabrasivecleaningproducts.Donotusealcohol!

If the instructions regarding cleaning the appliance or replacing the filters are not followed, this can cause a fire. These instructions must be followed! The manufacturer is not liable for damage to the hood or fired damage resulting from incompetent maintenance or from non-adherence to the safety instruction above.

Cookerhood

Cleanthecookerhoodwithsoapywaterandasoftcloth.

Thenrinsewithcleanwater.Donotuseaggressivecleaningagentssuchascausticsoda.Thecooker hoodfinishstaysingoodconditionifitisbuffedperiodicallyfollowingtheapplicationofwax.

NOTE!

Stainlesssteelcookerhoods

Donotusescouringpadsorotherabrasivecleanersonstainlesssteelcookerhoods.Finishwith anon-abrasive,non-polishingagentandbuffthestainlesssteelinthedirectionofthegrain.

Filtercleaningindicator

The filter indicator will light after 30 operating hours.

- Thegreasefiltersshouldthenbecleaned.

- Metalgreasefiltersshouldbecleanedonceamonth(orwhenindicatedbythefiltercleaning indicator)usinganeutralcleaningagent,eitherbyhandorinthedishwasheronashort, low-temperatureprogram.

- Place the grease filters with the openings facing downwards in the dishwasher so the water can drainoutofthefilter.Aluminiumgreasefiltersbecomedullasaresultofdishwashercleaning agents.Thisisnormalanddoesnotaffecttheworking.Allowthefilterstodrainwellbefore replacing.

- Reset the memory by long touching the – (minus) key until the filter indicator goes off.

Removingcassettefilter

Pure technical line drawing of a mechanical component or bracket (no text or symbols)

Isometric line drawing of a rectangular frame with internal horizontal lines and two small circular markers (no text or symbols)

Illustration of a hand reaching toward a large screen with blurred background figures (no text or symbols)

1. Switchoffthemotorandlighting.
   2.Pushinthelatchesandopenthepanel.
2. Openthefilter'saccesslatch.Supportthefilterwithyourhand.
3. Removethefilterfromthehood.

Insertingcassettefilter

Thefilters should be placed with the locking mechanism on the front. Open the filter access latch. Then the front of the filter will then slot in. Hold the access latch in this position when placing the filters.

1. Slotthenotchesatthebackofthefilterinthespeciallydesignedopeningofthecookerhood.
2. Tiltthefilterupwards.
3. Releasethefilteraccesshatch. Thenotchesatthebackofthefilterwillextendoutwardsand slotintothespeciallydesignedopeningsofthecookerhood.
   Thefilterisnowinpositionagain.
4. Presstheglassplatefirmlyinthesealagain(youwillhearaclick).

WARNING!

The glass plate can be removed for cleaning. Two people are required when removing the glass plate (duetoits weight)!

Replacingtheodour/particulatematters(PM2.5)filter

Theodour/fineparticlefiltermustbereplacedannually(orindicatedbytheodour/fineparticlefilter cleaningindicator).

Thefilterindicatorwillflashafter360operatinghours.

1. Removethescrewatthefrontsecuringthefilterholderbyturningitanti-clockwise.
2. Removethefilterholderwiththefilteroutofthehood.
3. Removetheoldfilteranddisposeofitwithyourresidualwaste.
4. Replacethenewfilterintheholder. Note: The arrowontheside indicate the airflow direction.

5. Replacethefilterholderbyfirstinsertingthebackintothenotches.

6. Re-tightenthefilterholder.

7. Resetthememorybylongtouchingthe-(minus)keyuntilthefilterindicatorgoesoff.

NOTE!

• Morenoiseisproducedwhenodourfiltersareusedthanwhenthecookerhoodisusedwithanexhaustvent.
• Odourfiltersfunctionoptimallyatalowermotorspeed.Consequently,youshouldavoidthe intensivesettingasmuchaspossible.

CAUTION!

Thesaturationofthefilterdependsontheintensityofuse,themannerofcookingandtheregularity withwhichthegreasefiltersarecleaned.

graph TD
    A["Top Row: Top Row with rotation arrow"] --> B["Bottom Row: Bottom Row with rotation arrow"]
    B --> C["Top Row: Top Row with waste bin icon"]
    C --> D["Bottom Row: Bottom Row with waste bin icon"]
    D --> E["Top Row: Top Row with waste bin icon"]

graph TD
    A["Warning"] --> B["Component placement"]
    B --> C{Check}
    C -->|Yes| D["Return to Air Conditioning"]
    C -->|No| E["End"]

Lighting

WARNING!

ThehoodisfittedwithLEDlights.Anauthorizedtechnicianmustreplacethese.Donotattempt toreplacetheLEDlightsyourself.

EUProductSheet

Datadeterminedaccordingto:

StandardEN61591andCommissionRegulations(EU)no.65/2014and(EU)no.66/2014.

		ES1074MGWS9074MG
		ATAGATAGTrademark
		ES1074MGWS9074MGTypeofmor
hood)[kWh/a]		25.323.8AnnualEnergyConsumpti
Energyefficiencyclass	A++	A++
hood)[%]		38.439.2FluidDynamicEfficiency(F
		AAFluidDynamicEfficiencyclass
hood)[lux/W]		53.853.8LightingEfficiency(LE
		AALightingEfficiencyclass
hood)[%]		89.489.4GreaseFilteringEfficiency
		BBGreaseFilteringEfficiencyclass
[m^3/h]		321/444322/439Airflowatminimum
^3/h]		783761Airflowatintensiveorboosts
Airborne acoustical A-weighted sound power emissions atminimum andmaximumspeedinnormaluse[dB(A)]	46 / 53	46 / 53
Airborne acoustical A-weighted sound power emissions atintensiveorboostsetting[dB(A)]	66	66
Powerconsumptionoffmode(P _o )	-	-
_s)[W]		0.360.36Powerconsumptioninstar

EUProductFiche

		ES1074MGWS9074MG
		0.60.6Timeincreasefactor(f)
hood)		36.834.4EnergyEfficiencyIndex(El
[m3/h]	BEP)	327.3301.9Measuredairflowrateat
	BEP)	377386Measuredairpressureatbe
(WBEP)		89.382.5Measuredelectricpowerir
	L)	5.35.3Nominalpowerofthelightings
cookingsurface(E middle)[lux]		419.3419.3Averageilluminationoft

Complianceinformation

	RFmoduleRadioequipmenttype
	2402-2477MHz(16channels)Operatingfrequencyrange
	-5.2dBmEIRPaverage(calculated)Maximumoutputpower
	-7dBiMaximumantennagain

	Wi-FimoduleRadioequipmenttype
	2412-2472MHz(16channels)Operatingfrequencyrange
Maximumoutputpower	17.7dBmEIRPaverage(calculated)
Maximumantennagain	2.7dBi

Hereby, ATAG declares that the radio equipment type Cooker hood is in compliance with Directive 2014/53/EU.

Safetyregulations

WARNING!

Thisapplianceshouldonlybeconnectedbyaregisteredinstaller.

• Always follow the installation instructions in the installation manual provided.
• Checktheappliancefortransportdamage.Donotconnecta damagedappliance.
• Faultypartsmayonlybereplacedbyoriginalparts. Themanufacturercanonlyguaranteethatoriginalpartsmeet safetyrequirements.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in orderto avoidahazard.
• AlwaysusetheoriginalSupplycordtoconnecttheappliance.
• Theelectrical connection must comply with national and local regulations.
• Thewallplugsocketandplugshouldalwaysbeaccessible.
• Ifastationaryapplianceisnotfittedwithasupplycordanda plug,orwithothermeansfordisconnectionfromthesupplymains havingacontactseparationinallpolesthatprovidefull disconnectionunderovervoltagecategoryIIIconditions,the meansfordisconnectionmustbeincorporatedinthefixedwiring inaccordancewiththewiringrules.Thisisalsoapplicablefor applianceswithasupplycordandplugwhentheplugisnot accessibleafterinstallingtheappliance.Usinganomnipolar switchwithacontactseparationofatleast3mmfittedinthefixed wiringwillfulfilthisrequirement.
• Theapplianceshouldnotbeconnectedtothemainsviaa multi-plugadapterorextensioncable,asthesafeuseofthe equipmentcannotbeguaranteed.

WARNING!

Neveropenthecasingoftheappliance.

• Disconnect the appliance from themain supply before starting any repair work.
• Weadviseyoutowearprotectivegloveswhenassemblingthe cookerhoodbecauseofthepossiblesharpedges.
• Thedistancebetweenthelowestpointofthecookerhoodand thesupportingsurfaceforthecookingvesselsgashobshould beatleast65cm.
• If the instruction of the gashobspecify a greater distance, this hastobetaken into account.

WARNING!

Failuretoinstallscrewsorfixingdevicesinaccordancewiththese instructionsmayresultinanelectricalhazard.

If the safety instructions and warnings are not followed, the manufacturer cannot be held responsible for any resulting damage.

If you decide to discontinue using the appliance because of a fault, were recommend you cutoff the cable after removing the plug from the plug socket. Take the appliance to your municipality's waste disposalsite.

Placetheapplianceinanenvironmentthatmeetsthefollowing conditions:

• Ambianttemperaturerange: +5....+40°C;
  •Humidity:30....70%RH;
  •Maximumaltitude:2000metersabovesealevel.

Preparationsforinstallation

55 cm 65 cm

max 150 cm

Electricalconnection

This appliance is manufactured in class I; it must therefore be connected to the earth system.

Makesurethesupplyvoltageratingscorrespondwiththosestatedontheappliancedataplate. Theconnectiontothemainsiscarriedoutasfollows:

•BROWN=Lphase
- BLUE=Nzero
- YELLOW/GREEN=Earth

During the electrical connection, makes sure that the electrical socket is equipped with an earth connection.

Thiscookerhoodhasbeenprovidedwithapowerplug.Wheninstallingthehood,makesurethat thisplugremainsaccessible.

WARNING!

If you want to make a fixed connection, ensure that an omnipolar switch with a contact separation of at least 3 mmis fitted in the supply line.

Appliancedimensions

Wallhoods

min. 764 (rec. 880) max. 1412 679 315 260 330 60 530 898 Ø150 120 135 685

Islandhoods

min. 764 max. 1412 679 315 260 330 608 1000 Ø150 120 685 135 60

Built-in

Wallhoods

1

Isometric technical diagram of a mechanical assembly with directional arrows indicating movement or force (no text or symbols present)

2

Diagram illustrating a 3D mechanical assembly with tool, arrows indicating movement, and two inset images showing cylindrical components.

3

Technical diagram illustrating a mechanical assembly with labeled components and directional arrows indicating process steps.

Technical diagram showing assembly of two screws with a tool, labeled with component '2', and an inset image of screw arrangement.

4

Technical diagram showing mechanical assembly with screws and a pipe connection, annotated with directional arrows and dashed lines indicating alignment or assembly.

5

1 D

6

2 G G

7

1

Technical diagram showing mechanical assembly with labeled component '2' and directional arrow

Technical diagram showing a hand operating a tool on a mechanical component, with a close-up of the assembly detail including a 3 mm dimension label.

8

Technical diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

9

Technical diagram illustrating four different mechanical assembly steps with numbered components and directional arrows indicating motion.

Installation

10

Technical diagram showing mechanical assembly with two labeled components and a close-up of screw parts, including inset images of washers.

11

Illustration of hands operating a cylindrical device with an upward arrow, no text or symbols present

12

Technical diagram showing a mechanical component with arrows indicating assembly or movement, and inset images of two bolts labeled 'S16' and 'S26'.

Islandhoods

1 A A 28 23

2

3 Ø 8 A

4 C B

Installation

5

1 D

6

2 G G

7

H F

8

Technical diagram showing cross-sectional views of a mechanical device with labeled components and directional arrows indicating assembly or operation.

9

E E

10

Technical diagram of a mechanical assembly with labeled parts (B, C, G) and directional arrows indicating motion or flow.

11

Diagram illustrating a mechanical assembly with labeled components A and B, showing a downward force on the internal structure.

12

3 click 4 B C 2 1

13

Technical diagram of a mechanical device with labeled parts (D, B) and exploded view insets showing screw assembly details.

14

L 1 M 2 M

15

A H

16

Illustration of a hand using a cable to lift a cylindrical component, with no visible text or symbols.

17

F 2 1 B F F

Tipsforenergy-efficient cookingwithhoods

• Usealowextractorsettingandusethehighestsetting(boost)ifnecessary.
• Awell-ventilated kitchen make esther ange hood more efficient.
• Clean filters regularly and replace filters when needed to keep the filter efficiency high, as a saturatedfiltercannotperformandleadstolongerusagetimes.

Disposal of the appliance and packaging

Sustainable material have been used during the manufacture of this appliance. This appliance must be disposed of responsibly at the end of its service life. Ask your local authorities for more information about how to do this.

The appliance packaging is recyclable. The following may have been used:

• cardboard;
  •polyethylenefilm(PE);
  •CFC-freepolystyrene(PSrigidfoam).

Disposeofthesematerialsinaresponsiblemannerandinaccordancewithgovernmentregulations.

Warning symbol for a trash bin with crossed lines indicating no waste or discharge, and a black rectangle below.

Theproducthasbeenmarkedwithacrossed-outdustbinsymbolto remindyouoftheobligationtodisposeofelectricalhousehold appliancesseparately. Thismeansthattheappliancemaynotbe includedwithnormaldomesticrefuseattheendofitsservicelife. Theappliancemustbetakentoaspecialmunicipalcentreforseparated wastecollectionortoadealerprovidingthisservice.

Aseparate collection of household appliances help to prevent any potential negative impact on the environment and human health caused by improper disposal. It ensures that them also of which the appliance is composed can be recovered to obtain significant savings in energy and raw materials.

CE

Declarationofconformity

WeherebydeclarethatourproductssatisfytheapplicableEuropean directives, ordersandregulations, aswellastherequirementsstated inthereferencedstandards.

Yournotes

Yournotes

ATAG

www.atag.nl

www.atag.be