CHDB 2200 C1 - Hair Dryers Cien BEAUTY - Free user manual and instructions

Product type	Ionic hair dryer
Model	CHDB 2200 C1
Brand	Cien BEAUTY
Power supply	220-240 V ~, 50-60 Hz
Rated power	2200 W
Protection class	II
Standby consumption	0.1 W
Airflow settings	Off, gentle, powerful
Heat settings	None, low, high
Cold air function	Yes (dedicated button)
Ionic function	Yes, built-in
Included accessories	Narrow styling nozzle, diffuser
Maintenance	Clean the air inlet grille with a soft brush; housing and accessories with a damp cloth
Safety	Do not use near water; overheat protection
Warranty	3 years
After-sales service France	0800904879
After-sales service Belgium	080071011

Frequently Asked Questions - CHDB 2200 C1 Cien BEAUTY

How to use the cold air function?

To use cold air, press and hold the cold air button (7) during drying. Release it to return to heat. This sets the hairstyle. Note: the function does not work if the heat level is set to 'no heat'.

How to clean the hair dryer?

Before cleaning, turn off and unplug the device. Clean the housing, nozzle and diffuser with a slightly damp cloth (no abrasive products). For the air inlet grille, turn it counterclockwise to remove it, brush it with a soft brush, then put it back by turning clockwise.

What to do if the device does not work?

Unplug the device and let it cool down. Check that the socket works and the cord is not damaged. If the problem persists, contact after-sales service. Do not attempt to repair it yourself.

Can I use the hair dryer in the bathroom?

Yes, but with caution. Do not use it near a bathtub, shower or washbasin containing water. Unplug it after use, as the presence of water is dangerous even when off. A residual current circuit breaker (30 mA) is recommended.

How to change the accessories (nozzle or diffuser)?

Turn off the device and unplug it. Wait for the accessories to cool down. To remove the nozzle or diffuser, gently pull them off the air outlet. To install them, simply snap them on. Do not touch hot accessories.

What is the power of this hair dryer?

The rated power is 2200 W with a voltage of 220-240 V ~, 50-60 Hz. It is high power for quick drying.

How to activate the ionic function?

The ionic function is continuously active during use. It releases ions to reduce frizz and add shine and softness. For optimal effect, use the device without attachments.

How to store the hair dryer?

Store the device in a cool, dry place, away from moisture and out of reach of children. You can hang it by its hanging loop. Use the original packaging if possible.

What to do in case of overheating?

If the device overheats, it turns off automatically. Unplug it and let it cool down completely. Check that the air inlet and outlet are not obstructed. Clean the grille if necessary. Before using it again, make sure it is cold.

What is the warranty of this product?

The warranty is 3 years from the date of purchase. It covers material and manufacturing defects. Keep the receipt as proof of purchase. To claim the warranty, contact after-sales service (FR: 0800904879, BE: 080071011).

USER MANUAL CHDB 2200 C1 Cien BEAUTY

Operation and safety notes

FR BE

SÈCHE-CHEVEUX IONIQUE

Warnings and symbols used ...... Page 15

Introduction Page 15

Intended use....Page 15

Scope of delivery....Page 16

Description of parts (Fig. A)....Page 16

Technical data Page 16

Safety instructions....Page 16

Before first use....Page 18

Operation....Page 18

Off mode Page 18

Drying hair....Page 18

Styling hair....Page 18

Cleaning and care Page 19

Cleaning the housing, the concentrator nozzle and the diffuser....Page 19

Cleaning the protection grid and the air inlet Page 19

Storage Page 19

Disposal Page 20

Warranty Page 20

Warranty claim procedure....Page 21

Service....Page 21

Warnings and symbols usedThe following warnings are used in this user manual and on the packaging:
	DANGER! This symbol in combination with the signal word “Danger” marks a high-risk hazard that if not prevented could result in death or serious injury.		Alternating current / voltage
			Hertz (supply frequency)
			Watts
	WARNING! This symbol in combination with the signal word “Warning” marks a medium-risk hazard that if not prevented could result in death or serious injury.		Symbol for a Protection Class II product
			Do not use this product near bathtubs, showers, basins or other vessels containing water.
	CAUTION! This symbol in combination with the signal word “Caution” marks a low-risk hazard that if not prevented could result in minor or moderate injury.		Read the instruction manual thoroughly, particularly the safety instructions.
	NOTE: This symbol in combination with “Note” provides additional useful information.		CE mark indicates conformity with relevant EU directives applicable for this product.
	Use the product in dry indoor spaces only.	[6X35]	Safety informationInstructions for use

IONIC HAIR DRYER

● Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

This product is designed to dry and style human hair. The product must not be used on artificial or animal hair. Do not use the product for any other purpose.

This product is only intended for private household use, not for commercial purposes.

The manufacturer accepts no liability for damages caused by improper use.

- Scope of delivery

After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packing materials before use.

1x lonic hair dryer
1x Diffuser
1x Concentrator nozzle
1x User manual

● Description of parts (Fig. A)

1 Air inlet
2 Protection grid
3 Hanging loop
4 Power cord and power plug
5 Q % (Air flow switch)
6 / = (Heat control switch)
7 ✱ (Cooling mode button)
8 Air outlet
9 Concentrator nozzle
10 Diffuser

- Technical data

Input voltage: 220–240 V\~, 50-60 Hz

Rated power: 2200 W

Protection class: II

Power consumption

under off mode: 0.1W

Safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

⚠ WARNING! RISK OF LOSS OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN!

Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.

■ Children shall not play with the product.

- Cleaning and user maintenance shall not be made by children without supervision.

⚠ WARNING! Misuse may lead to injury. Use this product solely in accordance with these instructions. Do not attempt to modify the product in any way.

⚠️ DANGER! Risk of electric

shock! Never attempt to repair the product yourself.

In case of malfunction, repairs are to be conducted by qualified personnel only.

⚠ WARNING! Risk of electric

shock! Do not immerse the product in water or other liquids. Never hold the product under running water.

⚠ WARNING! Risk of electric

shock! Never use a damaged product. Disconnect the product from the power supply and contact your retailer if it is damaged.

Before connecting the product to the power supply, check that the voltage and current rating corresponds with the power supply details shown on the product's rating label.

■ Regularly check the power plug and the power cord for damages. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

■ Protect the power cord against damages. Do not let it hang over sharp edges, do not squeeze or bend it. Keep the power cord away from hot surfaces and open flames.

For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

The use of extension cords is not recommended. If the use of an extension cord is necessary, it must be designed for a current flow of at least 10 A. Lay cords in such a way that they may not be tripped over or otherwise damaged.

⚠ WARNING! Risk of electric shock! Do not use this product near bathtubs, showers, basins or other vessels containing water.

The product must not be left unattended while it is connected to the supply mains.

Do not operate the product with wet hands or while standing on a wet floor. Do not touch the power plug with wet hands.

Do not pull the power plug out of the electrical outlet by the power cord. Do not wrap the power cord around the product.

■ Protect the product, its power cord and power plug against dust, direct sunlight, dripping and splashing water.

- Switch off the product before - changing attachments, - cleaning, - disconnecting the product from the power supply.

When the product is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the product is switched off.

- Do not drop the product to avoid damage to the product. - To avoid product overheat, never block the air inlet and air outlet during use.

Before first use

■ Remove the packaging. Check if all parts are complete.

NOTE: The product may give off some odour during first use. These are production or transport residue that will quickly subside.

Operation Off mode

The off mode is switched by plugged in the appliance without giving any action.

Drying hair

(Fig. B)

■ Connect the power p4 to a suitable electrical outlet.
■ Select the desired air flow and heat levels (Fig. B):

○/5(Air flow switch)	Air flow level
○	Product off
×	Product on: gentle air flow
×	Product on: strong air flow

- / ≠ 6(Heat control switch)	Heat level
-	No heat
=	Low heat
≡	High heat

After use: Select 5 to switch off the product. Disconnect the power plug 4 from the electrical outlet.

Styling hair

Using the concentrator nozzle

Put the concentrator noz9 on the air outlet 8.
■ Rotate the concentrator noz9 to change the position.
Switch on the product. Use the concentrator nozzle 9 to direct the air flow onto a specific section of the hair.

NOTE: We recommended to use gentle air flow (5) and low heat level (6) when styling hair.

⚠️CAUTION! Do not touch and remove the concentrator nozzle 9 when it is still hot.

Using the Diffuser

Place the diffu10 on the air outlet 8.
- Switch on the product. Use the diffu10 to create curls and gentle waves in the lengths and tips, as well as for body and volume at the roots of the hair.

i NOTES:

For long hair: Draw diffu10 through to the tips, and style the hair into gentle waves in the direction of the roots.
For short hair: Use the diffu10 to work on the hair around the roots, generating body and volume.

⚠️CAUTION! Do not touch and remove the diffuser 10 when it is still hot.

Cooling mode

Use the cooling mode to make the hairstyle last longer:

Cool air flow

Press and hold On button

■ Release button Off

i NOTES:

The cooling function (7) does not work when the heat level is set to "no heat" (-6).
- When the product fails to function, disconnect the product from power. Let the product to cool.

Ionisation function

Ions are continuously applied to the hair. This reduces the static loading of the hair and improves its stylability. The hair becomes soft, smooth, glossy, and easier to style.

NOTE: We recommend the use without attachments for the optimum activity of the ions.

● Cleaning and care

⚠️DANGER! Risk of electric shock! Always switch off the product and disconnect the power plug 4 from the electrical outlet before cleaning the product.

⚠ WARNING! Do not immerse the product's electrical components in water or other liquids. Never hold the product under running water.

⚠️CAUTION! Do not use corrosive or abrasive cleaning agents or material to clean the product.

● Cleaning the housing, the concentrator nozzle and the diffuser

■ Remove the concentrator nozzle 9 or the diffuser 10 from the air outlet 8.

Wipe the housing, the concentrator noz 9 and the diffuser 10 with a slightly damp cloth. For stubborn soiling, wipe with a light detergent on the cloth. And dry all parts thoroughly.

● Cleaning the protection grid and the air inlet

• Hold the handle of the product. Rotate the protection grid 2 in a counterclockwise direction.
  ■ Remove the protection 2 from the air inlet 1 (Fig. C).
• Clean the protection ② and the air inlet ① with a soft brush.
• Attach the protection g2 back onto the air inlet 1.
  ■ Rotate the protection g2 in a clockwise direction to securely attach it onto the air inlet 1.

Storage

• Store the product at a cool, dry place, protected from moisture and out of the reach of children.
• Store the product in the original packaging when it is not in use.
  Alternatively, the product can also be hung on its hanging loop 3.

● Disposal

The packaging is made of environmentally friendly materials, which may be disposed of through your local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics/20-22: paper and fibreboard/80-98: composite materials.

Product:

The product incl. accessories, manual and packaging materials are recyclable and are subject to extended producer responsibility.

Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your wornout product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

● Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.

This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

● Warranty claim procedure

To ensure quick processing of your claim, observe the following instructions:

Make sure to have the original sales receipt and the item number (IAN 481030_2410) available as proof of purchase.

You can find the item number on the rating plate, an engraving on the product, on the front page of the instruction manual (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, contact the service department listed below either by telephone or by e-mail.

Once the product has been recorded as defective you can return it free of charge to the service address that will be provided to you. Ensure to enclose the proof of purchase (sales receipt) and a short, written description outlining the details of the defect and when it occurred.

Service

GB Service Great Britain

Tel.:[phone]

E-Mail:[e-mail]

IE Service Ireland

Tel.:[phone]

E-Mail:[e-mail]

CE