ORGTK8080180 - Tent Vevor - Free user manual and instructions

Brand	Vevor
Model	ORGTK8080180
Product Type	Indoor grow tent kit
Tent Material	Reflective non-woven fabric
Frame Material	Steel
Usage	Indoor plant cultivation
Power Supply	110-240 V AC
Included Lighting	LED grow light
Included Ventilation	Inline duct fan and carbon filter
Included Timer	Programmable timer
Included Accessories	Clip fan, pruning shears, glasses, grow bags, ratchet ropes, trellis net, storage bag
Safety	Do not expose to direct sunlight, flames or excessive moisture. Do not touch the lamp when it is on.
Maintenance	Clean the exterior with a soft dry cloth. Regularly check zippers and seams.
Installation Instructions	Read the manual carefully before assembly. Assemble on a flat and stable surface.
Country of Origin	China
Importer	Sanven Technology Ltd., Suite 250, 9166 Anaheim, USA

Frequently Asked Questions - ORGTK8080180 Vevor

How to install the grow tent?

Follow the steps in the manual: first assemble the frame by connecting supports A, B, C, D, E with corner adapters H. Then place the tent F over the frame and secure the floor tray G. Install accessories such as the lamp, fan, and filter according to the instructions. Make sure the tent is set up on a flat and stable surface.

What is the recommended height for hanging the LED light?

The ideal height depends on the growth stage of the plants. Generally, keep the lamp about 30-60 cm above the plants to avoid burns. Use the ratchet ropes to easily adjust the height.

How to use the timer?

The timer allows you to program lighting cycles. Plug the lamp into the timer, then set the on and off times according to your plants' needs (e.g., 18 hours of light and 6 hours of darkness for the vegetative stage). Ensure the timer is correctly set to avoid interruptions.

Can I use the grow tent outdoors?

No, the tent is designed for indoor use only. It is not weather-resistant and must be protected from direct sunlight, excessive moisture, and heat sources.

What to do in case of a tear or light leak?

If the tent is torn, you can use strong adhesive tape for a temporary fix. For light leaks, check zippers and seams. If necessary, apply opaque tape inside. Avoid using the tent if the damage compromises its integrity.

How to clean the carbon filter?

The carbon filter cannot be cleaned; it must be replaced periodically (every 6 to 12 months depending on use). You can vacuum the exterior dust, but do not use water as it would damage the activated carbon.

What is the power of the included LED light?

The manual does not specify the exact wattage, but LED lights in this type of kit are typically 300 to 600W equivalent. Check the label on the lamp for precise specifications.

Can I add additional accessories like a humidifier?

Yes, you can add compatible accessories inside the tent, provided you respect weight limits and do not obstruct air circulation. Ensure electrical cables are not in contact with water.

How to ensure good air circulation in the tent?

Use the inline fan and carbon filter to extract stale air. Place the clip fan inside to circulate air. Ensure vent openings are not blocked and that airflow is sufficient to prevent stagnation.

What safety measures should I follow?

Do not let children play in or around the tent. Do not hang heavy equipment on the frame beyond its capacity. Do not touch the LED lamp when on to avoid burns. Keep electrical wires away from wet areas. If in doubt, consult the user manual.

USER MANUAL ORGTK8080180 Vevor

Affordable. Reliable. Home Improvement.

GROW TENT KIT

MODEL: ORGTK8080180

MODEL: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

This is the original instruction, please read all manual instructions care before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product received. Please forgive us that we won't inform you again if there are technology or software updates on our product.

WARNING:

• Please read through all instructions. If grow tent is improperly install and/or maintained, there is potential for damage or possible injury or death.
• Use extreme care when handling sharp object in or around tent.
• Keep electrical wires safely away from equipment and areas in and around the tent that may collect water.
  -Do not hang equipment on or from grow tent that is above the sup weight range.
  -Do not permit children to play on, in, or around grow tent.
  -Do not use your grow tent if any part of your tent material is crack ripped, or broken.
  -Do not place grow tent near a deck, stairs, chair, or other unsafe s
  -Assemble correctly to avoid tent tipping over and causing injury.
  -Do not expose grow tent to direct sunlight, near an open flame, or source.
  -Provide proper air circulation in your grow tent to prevent air from g stale.

PARTS LIST

A	Framework Support X 8	B	Framework Support X 4
C	Framework Support X4	D	Framework Support X1(Deep)
E	Framework Support X1(Shallow)	F	Tent X 1
G	Floor Tray X 1	H	Corner Adapter X 8
I	Filter Straps X 2	J	LED Light X 1
K	Inline Duct Fan X 1	L	Carbon Filter X 1
M	Ducting Hose X1	N	Corner Bracket X2
O	Timers X1	P	Clip fan X1
Q	Pruning Shears X1	R	Goggles X1
S	Grow Bag X4	T	Ratchet Ropes X2
U	Growing Net X1

ASSEMBLY STEP

Installation of the Bracket

Simple line drawing of a vertical tube inside an oval shape with a downward arrow indicating direction (no text or symbols)

Pure mechanical diagram showing a bracket and tool without any text, numbers, or symbols

Installation of the Tent
STEP1

3D diagram showing a rectangular box next to a flat base, with no text or symbols present.

3D diagram of a structural frame with labeled STEP2, showing internal components and support surfaces (no text or symbols on the diagram itself)

STEP2	STEP4
STEP5	Please slide the hangingbar smoothly, beware damage the tent skin.
STEP1	STE

Installation of the accessories
Part	Grow tent kit too assembly	Image	Functionality
Inline Duct Fan and Carbon Filter system	Connect a pair of ratchet ropes to the appropriate position. Then fix the filter, induct fan and black ducting. Finally, secure vent pipes and fans with clamps.		The inline duct fan, coupled with the carb filter system, ensures efficient air circulation and purification within the grow tent. This maintains a healthy air balanced atmospheric environment for plants, free from harmful contaminants and unpleasant odors.
Led Light	Unbox the metal hanger kits and attach the 4 small hooks to 4 holes on the back side of the light. Connect the hooks to the adjustable rope ratchet and hang the light above the plants at an appropriate height. Tips: Pay attention to touch the lamp directly with you hands while it is illuminated to avoid burns.		The Grow Light simulates natural sunlight, providing the necessary light spectrum for photosynthesis and promoting healthy plan growth and development.
Timers	Timer Setting time		The Timer automates the lighting schedule, ensuring that plants receive the precise amount of illumination required for healthy growth and development.
Clip fan	Install the clip fan on the poles according to the user tutorial.		It can be fixed in different places to make the air flow spe faster in specific locations.
Grow Bag	Putting grow bags		Non-woven bag material to improve air permeability and water permeability, providing suitable moisture air and nutrients for roots
Growing net	Attach hooks to the four corners of the growing net.		The Trellis provides structural support for climbing plants, fostering healthy growth patterns and maximizing the utilization of space within the grow tent.
Woven mesh storage bag	Organizing Products. Place the remaining tools in the tool bag.		Easy access to plantir supplies.
TIPS:1.Please read the instructions carefully in order to assemble the Grow Cha avoid excessive force during assembly to avoid damage and light leakage.2.Children are not allowed to play in, around or through the Grow tent.3.Do not place Grow tent kits goods in direct sunlight, near an open fire source.4.Be very careful when carrying sharp objects in or around the Grow tent5.Do not touch the grow light directly with your hands when it is working burns.6.Fan studio, please don't stick your hand into the fan to avoid injury.

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

KIT DE TIENDA DE CULTIVO

MODELO: ORGTK8080180

MODELO: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a circular object with a vertical bar and a downward arrow, no text or symbols present.

Pure mechanical diagram showing a bracket and tool path without any text or symbols

3D diagram showing a rectangular block with a flat base and a wireframe cube structure (no text or symbols)

3D diagram of a structural frame with labeled STEP2, showing internal components and support structures (no text or symbols on the diagram itself)

STEP3

Technical line drawing of a mechanical assembly with no visible text or symbols

STEP4

3D rendering of a gray industrial cabinet or enclosure with mounting holes and a side panel (no text or symbols)

STEP5

Simple line drawing of a rectangular frame inside a circle (no text or symbols)

Simple line drawing of a 3D rectangular frame with labeled points D and E, enclosed in a circle (no text or symbols beyond labels)

Simple line drawing of a 3D rectangular frame with a red arrow indicating rotation or movement (no text or symbols)

Please slide the hangingbar smoothly, beware damage the tent skin.

Diagram of a cabinet with open door and internal panel, showing structural components (no text or symbols)

Illustration of a gray industrial cabinet with open door and side compartments (no text or symbols)

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Fabricante: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

ODLINGSTÄLTKIT

MODELL: ORGTK8080180

MODELL: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a vertical tube inside an oval shape with a downward arrow and a small bottle at the bottom (no text or symbols)

Pure mechanical diagram showing a bracket and tool path without any text or symbols

Technical illustration of a rectangular frame structure with a flat base and a separate 3D model (no text or symbols)

3D diagram of a structural frame with labeled STEP2, showing internal components and support surfaces (no text or symbols on the diagram itself)

STEP2	STEP4
STEP5Please slide the hangingbar smoothly, beware damage the tent skin.
STEP1	STEP2

Close-up of a green textured fabric with a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured metallic surface with a red arrow pointing to a small object (no visible text or symbols)

Correct operation

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 kanadensiska republiken.

Importerad till Australien: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD

NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plats, Rancho Cucamonga, Kalifornien 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

KWEEKTENT KIT

MODEL: ORGTK8080180

MODEL: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a circular object with a vertical bar and a double-headed arrow, no text or symbols present.

Pure mechanical diagram showing a bracket and tool without any text, numbers, or symbols

3D diagram showing a rectangular box and its wireframe structure, no text or symbols present

3D diagram of a structural frame with labeled STEP2, showing internal components and support surfaces (no text or symbols on the diagram itself)

STEP3

Technical line drawing of a mechanical assembly with no visible text or symbols

STEP4

3D rendering of a gray industrial cabinet or enclosure with mounting holes and a side panel (no text or symbols)

STEP5

Simple line drawing of a rectangular frame inside a circle (no text or symbols)

Simple line drawing of a 3D rectangular frame with labeled points D and E, enclosed in a circle (no text or symbols beyond labels)

Simple line drawing of a 3D rectangular frame with a red arrow indicating rotation or movement (no text or symbols)

Please slide the hangingbar smoothly, beware damage the tent skin.

Diagram of a cabinet with open door and internal panel, showing structural components (no text or symbols)

Illustration of a closed industrial cabinet with open door and side compartments (no text or symbols)

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

KIT DE TENTE DE CULTURE

MODÈLE: ORGTK8080180

MODÈLE: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a circular shape with a vertical line and a double-headed arrow, no text or symbols present.

Pure mechanical diagram showing a bracket and tool without any text, numbers, or symbols

Installation de la tente

STEP1

3D diagram showing a rectangular box and its wireframe structure, no text or symbols present

3D diagram of a structural frame with labeled STEP2, showing internal components and support surfaces (no text or symbols on the diagram itself)

STEP3

Technical line drawing of a mechanical assembly with no visible text or symbols

STEP4

3D rendering of a gray industrial cabinet or enclosure with mounting holes and a side panel (no text or symbols)

STEP5

Simple line drawing of a rectangular frame with vertical and horizontal lines, enclosed in an oval (no text or symbols)

Pure technical line drawing of a 3D rectangular frame with internal supports, enclosed in a circle (no text or symbols)

Simple line drawing of a structural frame inside a circle, with a red arrow indicating rotation (no text or symbols)

Please slide the hangingbar smoothly, beware damage the tent skin.

Diagram of a cabinet with open door and internal compartments, showing structural details (no text or symbols)

Illustration of a closed industrial cabinet with open door and side compartments (no text or symbols)

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREET, ASTV NSW 2122 Australie

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

GROWZELT-KIT

MODELL: ORGTK8080180

MODELL: ORGTK8080180

Illustration of a closed industrial cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a symmetrical shape with a vertical bar and a downward arrow, no text or symbols present.

Pure mechanical diagram showing a lever and shaft assembly without any text, numbers, or symbols

Aufbau des Zeltes

STEP1

3D diagram showing a rectangular box and its wireframe structure, no text or symbols present

3D diagram of a structural frame with labeled STEP2, showing internal components and support structures (no text or symbols on the diagram itself)

STEP3

Technical line drawing of a mechanical assembly with no visible text or symbols

STEP4

3D rendering of a gray industrial cabinet or enclosure with mounting holes and a side panel (no text or symbols)

STEP5

Simple line drawing of a rectangular frame inside a circle (no text or symbols)

Simple line drawing of a 3D rectangular frame with labeled points D and E, enclosed in a circle (no text or symbols beyond labels)

Simple line drawing of a 3D rectangular frame with a red arrow indicating rotation or movement (no text or symbols)

Please slide the hangingbar smoothly, beware damage the tent skin.

Diagram of a cabinet with open door and internal compartments, showing structural details (no text or symbols)

Illustration of a gray industrial cabinet with open door and internal compartments (no text or symbols)

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

ZESTAW DO UPRAWY NAMIOTU

MODEL: ORGTK8080180

MODEL: ORGTK8080180

Illustration of a gray cabinet with open door and side compartments (no text or symbols)

Simple line drawing of a circular object with a vertical bar and a double-headed arrow, no text or symbols present.

Pure mechanical diagram showing a bracket and tool path without any text or symbols

Montaż namiotu

STEP1

Technical illustration of a rectangular frame with a flat base and a separate 3D model (no text or symbols)

3D diagram of a structural frame with labeled STEP2, showing internal components and support structures (no text or symbols on the diagram itself)

STEP3

Technical line drawing of a mechanical assembly with no visible text or symbols

STEP4

3D rendering of a gray industrial cabinet or enclosure with mounting holes and a side panel (no text or symbols)

STEP5

Simple line drawing of a rectangular frame inside a circle (no text or symbols)

Simple line drawing of a 3D rectangular frame with labeled points D and E, enclosed in a circle (no text or symbols beyond labels)

Simple line drawing of a 3D rectangular frame with a red arrow indicating rotation or movement (no text or symbols)

Please slide the hangingbar smoothly, beware damage the tent skin.

Close-up of a textured fabric surface with green bands and a red arrow pointing to a small object (no text or symbols visible)

Incorrect operation

If light leakage occurs in a dark environment, smooth the light barrier at the inner zipper of the tent to im light blocking effect.

Close-up of a textured fabric surface with a small red mark, no visible text or symbols

Correct operation

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD

NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP