LD-HS2 - Vevor - Free user manual and instructions

USER MANUAL LD-HS2 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HUMAN BODY TEACHING MODELS USER MANUAL

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands

VEVOR®

TOUGH TOOLS, HALF PRICE

HUMAN BODY TEACHING MODELS

Illustration of a human forearm with a medical catheter attached (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

1. Read this instructions before using this product. Failure to do so can result in serious injury.
2. After use, please assemble all the parts and keep them vertically.
3. Avoid high temperature and direct sunlight.
4. Remove minor stains with neutral detergent. The use of alcohol, beer and other substances may damage the product.

SAVE THESE INSTRUCTIONS

PRODUCT PARAMETER

Model	LD-HS1LD-HS2LD-HS3
Type	Injection and blood drawing exercise k
Arm Material	PVC

DETAILED LIST

LD-HS1	Arm	1
	Nursing Care Pad	1
	Syringe 1ml	1
	Syringe 2.5ml	1
	Syringe 5ml	1
	Syringe 10ml	1
	Scalp Needle	3
	Infusion Bottle	2
	Gloves	10 pairs
	Indwelling Needle	2
	Blood Collection Beedle	2
	Vacuum Vessel 5ml	2
	Blood Powder	1
	Tourniquet	1	[5CBC]
	Stents	1	[w8CY]
	Storage Bag	1
LD-HS2	Arm	1
	Nursing Care Pad	1
	Syringe 1ml	1
	Syringe 2.5ml	1
	Syringe 5ml	1
	Scalp Needle	1
	Infusion Bottle	1
	Gloves	10 pairs
	Indwelling Needle	1
	Blood Powder	1	[ywk6]
	Tourniquet	1
	Stents	1
	Storage Bag	1
LD-HS3	Arm	1
	Nursing Care Pad	1
	Syringe 5ml	1
	Infusion Bottle	1
	Blood Powder	1	[h47H]
	Tourniquet	1
	Stents	1
	Storage Bag	1

INSTRUCTIONS

Installation method:

Medical equipment setup including a purple 'WELLISH' bag, a spring-loaded test tube, and a human hand with tubing (no text or symbols visible on main subjects)

1

Person in white lab coat holding a tool with a curved blade, next to a rolled dough or dough sample (no visible text or symbols)

2

Person in lab coat and gloves handling a metal wire or clamp (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

Blood draw steps:

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Blood Transfusion:

Scientist in lab coat conducting IV drip with red liquid and tubing (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;

b. The injected red ink is insufficient;

c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

BESOIN D'AIDE? CONTACTEZ-NOUS!

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Transfusion sanguine :

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

Installationsmethode:

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Bluttransfusion:

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

Medical equipment setup including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod or wire (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod or wire (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod or wire (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Transfuzja krwi:

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

HULP NODIG? NEEM CONTACT MET ONS OP!

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod or wire (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Bloedtransfusie:

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Illustration of a human forearm with a medical catheter attached, no text or symbols present

BEHÖVER HJÄLP? KONTAKTA OSS!

Medical equipment including a blue-wellish bag, a spring-loaded test tube, and a human forearm with tubing (no text or symbols visible)

1

Person in white lab coat holding a propeller with a rolled food item nearby (no visible text or symbols)

2

Person in lab coat and gloves handling a metal rod or wire (no visible text or symbols)

3

Person in lab coat and mask pouring red liquid into a beaker with a metal stand (no visible text or symbols)

4

Step 1: Take the arm model, infusion tube, bracket and other accessories out of the box.

Step 2: Tighten the fixing nut to fix the bracket on the hole position of the tray.

Step 3: Blood simulation: add red powder and water to prepare red ink, and then pour it into the hanging bottle (or container)

Blodtagningssteg:

A2 ON A1 OFF

Step 1: Close one of the pipe clamps (A1) on the arm

A1 OFF A2 ON A2 OFF

Step 2: After the syringe draws the red ink, fill the other hose (A2) with red ink, and immediately close the pipe clamp(A2).

Close-up of a gloved hand holding a syringe inserted into a patient's wrist, with no visible text or symbols.

Step 3: Hold an empty syringe and stab it into one of the veins on the arm. Draw blood, and you can see the red liquid entering the syringe.

Note:

If the red ink does not enter the syringe. The reason as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;

Blodtransfusion:

Scientist in lab coat conducting IV drip experiment with beaker and test tube (no visible text or symbols)

Step 1: First, the infusion bottle is filled with red ink, hanging it on a stand then turn off the flow regulator.

A2 ON A1 OFF OFF

Step 2: Close the pipe clamp(A1); open the pipe clamp(A2).

ON

Step 3: The butterfly needle is accurately inserted into the vein of the arm, turn on the flow regulator, the red fluid flows out of the venous tube A2 after circulating in the venous tube. (Use the appropriate container to liquid)

Note:

If the red ink does not outflow from the vein A2. The reason is as follow:

a. The vein was completely punctured;
b. The injected red ink is insufficient;
c. The A1 pipe clamp isn't hung on the bracket (need hang it as picture show)

A1

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support