GoFree CAKU-01 - Food Processor MPM - Free user manual and instructions

USER MANUAL GoFree CAKU-01 MPM

Black electronic device with a USB cable attached (no visible text or symbols)

CAKU-01

BATERIE ZDARMA
KOSTENLOSERAKU
AKUMULATOR GO TASUTA
AKUMULATOR GO AQPCEAN
CO FREE BATTERY
ACUMULADOR GO FREE
AKUMULATOR GO FREE
INGYENES AKKUMULATOR
AKUMULATOR CO GRATIS
CO FREE AKUMULATORIUS
GO FREE AKUMULATORS
CA GRATIS BATTERLI
AKUMULATOR GO FREE
AKUMULATOR GO FREE
ОСВОБОДИТЕ АККУМУЛЯТОР
VYPNITE BATERIU

CMBL-01, CMBL-02, CMMR-01

CZ NÁVOD K OBSLUZE 3
DE BEDIENUNGSANLEITUNG 12
EE KASUTUSJUHEND 21
EL EFXEPIAIOXPHSTH 29
EN USER MANUAL 39
ES MANUAL DE INSTRUCCIONES 48
FR MANUEL DE L'UTILISATEUR 58
HU HASZNÁLATI UTASÍTÁS 68
IT MANUALE D'USO 77
LT VARTOTOJO VADOVAS 86
LV LIETOTAJA ROKASGRAMATA 94
NL GEBRUIKERSHANDLEIDING 103
PL INSTRUKCJA OBSŁUGI 113
RO MANUAL DE UTILIZARE 123
RU ИНСТРУКЦИЯ ПО ОБСЛУЖИВАНИЮ 132
SK POUŽIVATELSKÁ PRÍRUČKA 143
UA ПОСІБНИК КОРИСТУВАЧА 152

MPM and S.A.

Operating time up to 50 minutes on a single charge

Standard charging via cable: USB-A / USB-C

Box contains: rechargeable battery + cable

BEZPEČNOSTNÍ POKYNY PŘI POUŽÍVÁNÍ

Before installing the battery, read the following instructions and the instructions of the device to which it is to be mounted – absolutely follow the provisions of the instructions.

-The battery is designed for use only with a dedicated group of products. Do not use it for purposes other than those for which it was designed.
-Use only accessories supplied in the kit or dedicated for use with the battery, but sold separately.

The device can only be used with a dedicated fast charging kit, model CAKU-02 – kit sold separately. Use of

unrecommended accessories, may result in damage to the battery or property.

-Do not try to open the battery housing on your own.

- Do not expose the battery to fire, extreme temperatures (below -10, above + 50C°), water, humidity or prolonged sunlight.

-Do not store the battery together with metal objects, e.g. paper clips, nails, coins, etc., or intentionally short-circuit the negative and positive terminals - risk of ignition, explosion.

-Do not allow a situation that may result in deformation of the battery, e.g. significant shocks, vibrations, mechanical pressure, etc. - do not use the battery

if it has been damaged (mechanical damage, substance leakage, etc.).

-Do not allow the deep battery discharge.

-Check the battery charge regularly - do not leave the battery without control for a longer period of time.

-If there is any leakage from the battery, do not touch the substance that has leaked out of the battery.

-CAUTION! The battery contains sub- stances that can cause environmental pollution. Do not dispose of the used appliance with ordinary household waste.

-The device can only be used/stored indoors. The device is designed to work

in a domestic environment, do not expose it to weather conditions such as rainfall, direct sunlight, etc.

-The battery must not be used by children, store it out of the reach of children.
- Children are not allowed to play with the battery.
-Packaging is not a toy! Please keep packaging components (plastic bags, cartons, styrofoam, etc.) out of the reach of children.

-WARNING! Do not allow children to play with the film. Danger of suffocation!

APPLIANCE DESCRIPTION

1. Lithium-ion battery 11.1V, 2000mAh
2. Charge status lights

3. Charge status button

4. USB-C charging port

5. USB-A/USB-C charging cable

CAUTION! The battery is compatible with all GoFree wireless series devices.

BEFORE FIRST USE

1. Take the battery out of the box and remove all the protective cardboard and foil.
2. Check the battery for damage that may have occurred during transportation. If you have any doubts contact the seller.
3. Charge the battery until all the battery charge status lights are on continuously. When fully charged, 5 lights are lit.

CHARGING THE BATTERY

The battery can be charged in two ways:

Using a USB-A/USB-C type cable connected directly to the battery:

1. Connect the end of the cable (USB-A) to a 5V = power source equipped with a USB-A port (such as a phone charger).

2. Connect the other end of the cable (USB-C) to the USB-C port on the battery.

3. During charging, the battery lights will flash. The progress of charging will be indicated by the lighting of successive lights, full charging will be indicated by the lighting of all 5 lights with a continuous light.

4. The approximate time for this method of charging, with a current of 2A, is about 3 hours.

Using a dedicated base with CAKU-02 charger (fast charging):

1. Connect the dedicated 12.6V = 4A charger to the mains and then to the charging base.
2. Insert the battery into the charging base. Thanks to built-in magnets, the battery installs automatically when the battery is applied to the charging base.
3. During charging, the battery lights will flash. The progress of charging will be indicated by the lighting of successive lights, full charging will be indicated by the lighting of all 5 lights with a continuous light.
4. The approximate time required to fully charge the battery using the base with charger model CAKU-02 is about 30 minutes.

CAUTION! Optionally, you can connect the end of the cable (USB-C) to the charging base, and the other end to a 5V power source (such as a phone charger). The approximate time for this method of charging, with a current of 2A, is about 3 hours.

CAUTION! When charging is complete, disconnect the charger from the mains and the charger cable from the battery.

CAUTION! The kit does not include a base with a charger. For fast charging of the battery it is necessary to purchase a dedicated base with charger (model CAKU-02).

Battery indicator light colours	Battery lights in %	Note
1 white less than 20% -
2 white 21-40% -
3 white 41-60% -
4 white 61-80% -
5 white 81-100% -
blue - high engine temperature
Red - battery protection function is enabled

TECHNICAL DATA

Technical specifications are given on the product nameplate.

Caution! MPM agd S.A. reserves the right to technical changes.

Proper removal of product (batteries and/or accumulators)

The icon with a crossed out trash can indicate that accumulators/batteries are subject to selective collection and recycling. Pursuant to Directive 2006/66/WE, batteries and/or accumulators must not be thrown away together with other waste coming from households after their service life comes to an end. To prevent possible damage to the environment or human health resulting from uncontrolled waste disposal, accumulators/batteries should be collected, disposed of or recycled in accordance with applicable laws. A used battery should be placed in a special container at separate collection points for this type of waste.

Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be disposed with other type of municipal waste. Used equipment may have a negative impact on the environment and health of people due to potentially containing hazardous substances, mixtures and components. Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may cause a release of substances that are hazardous to the environment and health. Used equipment should be handed-over to a point

for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points, the user should contact the municipal point of electric waste collection or used equipment processing department.

BESCHRIJVING VAN HET APPARAAT