STYLE 30.5021 - Measuring equipment TFA - Free user manual and instructions

USER MANUAL STYLE 30.5021 TFA

www.lfa-dostmann.de/en/service/downloads/Instruction-manuals

Kat. Nr. 30.5021

A: SET Taste B: SWITCH Taste

C: MAX/MIN Taste

Gehäuse

Thank you for choosing this instrument from TFA.

1. Before you use this product

- Please make sure you read the instruction manual carefully.

- Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.

- We shall not be liable for any damage occurring as a result of non-following of these instructions. Likewise, we take no responsibility for any incorrect readings or for any consequences resulting from them.

- Please pay particular attention to the safety notices!

- Please keep this instruction manual safe for future reference.

2. Introduction

This digital thermo-hygrometer is an ideal measuring instrument for checking room ambient conditions.

Excessive room-air humidity can damage your health and promotes the formation of damp patches and mould.

But excessively dry room air can also affect our well-being and health in various respects. Skin, mucous membranes and airways are adversely affected and pets, house-plants, wooden flooring and antique furniture may also suffer.

Checking indoor temperature and humidity can help to achieve a comfortable and healthy living environment and may even save you heating costs.

3. Field of operation

• Modern design
• For checking indoor temperature and humidity to provide a healthy room climate
• With comfort level, maximum and minimum values and time

Digital thermo-hygrometer

GB

4. For your safety

• The product is exclusively intended for the field of application described above. The product should only be used as described within these instructions.
• Unauthorised repairs, modifications or changes to the product are prohibited.

Caution! Risk of injury:

• Keep this device and the battery out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Avoid contact with skin, eyes and mucosa when handling leaking batteries. In case of contact, immediately rinse the affected areas with water and consult a doctor.

Important Information on product safety!

• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture.

A: SET button B: SWITCH button

C: MAX/MIN button

Housing

D: Wall mounting hole E: Stand (removable)

F: Battery compartment

6. Getting started

• Remove the stand by carefully pulling it downwards.
• Open the battery compartment by turning the lid with a coin counterclockwise. Remove the insulation strip.
• Close the battery compartment again.
• All LCD segments will light up for about a few seconds.
  • The unit is now ready to use
• The upper display shows the time and the comfort level, the middle display shows the current temperature and the lower display the relative humidity.

7. Setting of clock

• After battery was activated or press and hold SET button for 3 seconds, you will enter the time setting mode.
  • The hour digit is flashing.
• Press SWITCH button to adjust the hours.
• Press SET button again and set minutes in the same way.
• Hold and press the button for a fast count.
• Press SET button to confirm it.

Digital thermo-hygrometer

GB

8. Temperature display

• Press SET button to change between °C (Celsius) or °F (Fahrenheit) as temperature unit in normal mode.
• With Fahrenheit as temperature unit, the clock automatically switches to the 12 HR system (PM appears on the display after noon).

9. MAX/MIN values

• Press MAX/MIN button.
• MAX appears on the display. The maximum temperature and humidity are displayed.
• Press the button again.
• MIN appears on the display. The minimum temperature and humidity are displayed.
• Press MAX/MIN button again to return to normal mode.
• Press SET button in the respective mode to clear the recorded MAX/MIN reading.
• -.- °C and --.-% appear on the display.

10. Comfort zone

11. Display

12. Positioning and mounting

13. Care and maintenance

• On the display appears a smiling face icon to indicate the comfort level of indoor climate (humidity 40%...60%).
• Using the SWITCH button, you can choose between the large-scale display of temperature or humidity in normal mode.
• With the removable leg the instrument can be placed onto any flat surface or wall mounted at the desired location by the wall mounting hole at the back of the unit.
• Clean it with a soft damp cloth. Do not use solvents or scouring agents.

• Remove the battery if you do not use the product for a lengthy period.
• Keep the instrument in a dry place.

13.1 Battery replacement

- Change the battery CR 2032 button cell when the battery symbol appears on the display.

- Observe correct polarity (+ pole above).

14. Troubleshooting

Problems Solutions

No indication

→ Ensure battery polarity is correct (+ pole above)→ Change the battery

Incorrect indication → Change the battery

If your device fails to work despite these measures contact the supplier from whom you purchased it.

15. Waste disposal

This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment. Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.

Disposal of the electrical device

Remove non-permanently installed batteries and rechargeable batteries from the device and dispose of them separately.

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).

Digital thermo-hygrometer

GB

This product must not be disposed of in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal. The return service is free of charge. Observe the current regulations in place!

Disposal of the batteries

Batteries and rechargeable batteries must never be disposed of with household waste. They contain pollutants such as heavy metals, which can be harmful to the environment and human health if disposed of improperly, and valuable raw materials such as iron, zinc, manganese or nickel that can be recovered from waste. As a consumer, you are legally obliged to hand in used batteries and rechargeable batteries for environmentally friendly disposal at retailers or appropriate collection points in accordance with national or local regulations. The return service is free of charge. You can obtain addresses of suitable collection points from your city council or local authority.

The symbols for the contained heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.

WARNING!

Damage to the environment and health through Incorrect disposal of the batteries!

WARNING!

Batteries containing lithium can explode!

- Batteries and rechargeable batteries containing lithium (Li=lithium) present a high risk of fire and explosion due to heat or mechanical damage with potentially serious consequences for people and the environment. Pay particular attention to correct disposal.

Measuring range:Indoor temperature: -20°C...+50°C (-4°F...+122°F)°C/°F switchable

Accuracy: 0°C...+40°C ± 1°C, otherwise 1.5°C

Resolution: 0.1°C

Humidity: 20... 99 %rH

Accuracy: 35%...75% ±4%

“Lo”: = temperature is lower than -20°C

Power consumption: 1x Button cell battery CR 2032

Dimensions: 105 x 14 (41) x 105 mm

Weight: 95 g (only instrument)

TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, 97877 Wertheim, Germany

No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

www.tfa-dostmann.de 02/23

Cd = cadmium, Hg = mercure, Pb = plomb.

ATTENTION DANGER!

Precision: 35%...75% ±4%