BCTU76CMZ - Fan Be Cool - Free user manual and instructions

USER MANUAL BCTU76CMZ Be Cool

Black vertical tower-shaped electric air conditioner unit with grid grille and ventilation slots (no visible text or symbols)

HERZLICHEN GLÜCKWUNSCH!

QR code image containing encoded data, no visible human-readable text

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line and label 'Symbolbild' (no other text or symbols)

Diagram of a mechanical assembly with a tool interacting with a circular component, labeled 'Symbolbild' (no other text or symbols)

Mechanical assembly diagram showing a hand adjusting a circular component with a bolt (no text or symbols)

Line drawing of a hand turning a car wheel component with a screwdriver (no text or symbols)

Technical diagram showing a mechanical component with concentric circles and a central shaft, labeled 'Symbolbild' (no other text or symbols)

Black vertical tower with grid pattern and ventilation grille, mounted on a circular base (no visible text or symbols)

FÉLICITATIONS! MERCI D'AVOIR CHOISI UN PRODUIT BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

VEUILLEZ LIRE ATTENTIVEMENT CES INSTRUCTIONS AVANT DE COMMENCER L'INSTALLATION, L'UTILISATION OU LA MAINTENANCE. PROTÉGEZ-VOUS ET PROTÉGEZ LES AUTRES EN SUIVANT LES CONSIGNES DE SÉCURITÉ. LE NON-RESPECT DES INSTRUCTIONS PEUT ENTRAÎNER DES BLESSURES ET/OU DES DOMMAGES MATÉRIELS ET/OU LA PERTE DE LA GARANTIE !

INFORMATIONS IMPORTANTES CONCERNANT LA SÉCURITÉ, L'EMPLACEMENT ET LE RACCORDEMENT ÉLECTRIQUE.

Warning symbols including a hand holding an eye, a warning triangle with an exclamation mark, and a triangular hazard symbol.

BE COOL

Pure mechanical part diagram showing two symmetrical cutouts with a central shaft (no text or symbols)

Diagram showing concentric circles with a diagonal line and label 'Image symbolique' (no other text or symbols)

Mechanical assembly diagram showing a hand operating a gear with rotating components (no text or symbols)

Line drawing of a hand turning a car wheel component with a screwdriver (no text or symbols)

Image symbolique

Black vertical tower with grid-patterned ventilation grille and a circular base (no visible text or symbols)

CONGRATULAZIONI!

GRAZIE PER AVER SCELTO UN PRODOTTO BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

LEGGERE ATTENTAMENTE QUESTE ISTRUZIONI PRIMA DI INIZIARE L'INSTALLAZIONE, L'UTILIZZO O LA MANUTENZIONE. PROTEGGERE SE STESSI E GLI ALTRI SEGUENDO LE ISTRUZIONI DI SICUREZZA. LA MANCATA OSSERVANZA DELLE ISTRUZIONI POTREBBE CAUSARE LESIONI PERSONALI E/O DANNI MATERIALI E/O LA PERDITA DEL DIRITTO ALLA GARANZIA!

INFORMAZIONI IMPORTANTI SULLA SICUREZZA, L'UBICAZIONE E IL COLLEGAMENTO ELETTRICO.

Uso conforme

BE COOL

Pure mechanical cross-section diagram without any text, numbers, or symbols

Mechanical assembly diagram showing a hand adjusting a gear component (no text or symbols visible)

Line drawing of a hand turning a car wheel component with a screwdriver (no text or symbols)

Black vertical electric air conditioner tower with grid grille and ventilation slots (no visible text or symbols)

GEFELICITEERD!

HARTELIJK DANK DAT U VOOR EEN PRODUCT VAN BE COOL HEEFT GEKOZEN.

BE COOL

Actuele handleidingen en andere talen

QR code image containing encoded data, no visible human-readable text

LEES DEZE HANDLEIDING ZORGVULDIG DOOR VOORDAT U BEGINT MET DE INSTALLATIE, HET GEBRUIK OF HET ONDERHOUD. BESCHERM UZELF EN ANDEREN DOOR DE VEILIGHEIDSVOORSCHRIFTEN OP TE VOLGEN. HET NIET OPVOLGEN VAN DE INSTRUCTIES KAN LEIDEN TOT PERSOONLIJK EN/OF MATERIËLE SCHADE EN/OF HET VERLIES VAN DE GARANTIE!

BELANGRIJKE INFORMATIE OVER VEILIGHEID, LOCATIE EN ELEKTRISCHE AANSLUITING.

Beoogd gebruik

BE COOL

Pure mechanical cross-section diagram without any text, numbers, or symbols

Mechanical assembly diagram showing a hand adjusting a gear with a rotating component (no text or symbols)

Line drawing of a hand turning a car wheel component with a screwdriver (no text or symbols)

Black vertical electric air conditioner tower with grid grille and ventilation slots (no visible text or symbols)

¡ENHORABUENA!

MUCHAS GRACIAS POR ELEGIR UN PRODUCTO DE BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

Warning symbols including a hand holding an eye, a warning triangle with an exclamation mark, and a triangular hazard symbol.

Uso previsto

BE COOL

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Imagen simbólica

Mechanical assembly diagram showing a hand adjusting a gear component (no text or symbols visible)

Line drawing of a hand turning a car wheel component with a screwdriver (no text or symbols)

Imagen simbólica

Black vertical tower with grid-patterned ventilation grille and a circular base (no visible text or symbols)

GRATULUJEME!

DĚKUJEME, ŽE JSTE SE ROZHODLI PRO PRODUKT BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PŘED ZAHÁJENÍM INSTALACE, PROVOZU NEBO ÚDRŽBY SI PEČLIVĚ PŘEČTĚTE TENTO NÁVOD. CHRAŇTE SEBE I OSTATNÍ DODRŽOVÁNÍM BEZPEČNOSTNÍCH POKYNŮ. NEDODRŽENÍ POKYNŮ MŮŽE VÉST K ÚRAZU A/NEBO POŠKOZENÍ MAJETKU A/NEBO ZTRÁTĚ NÁROKU NA ZÁRUKU!

DŮLEŽITÉ INFORMACE O BEZPEČNOSTI, UMÍSTĚNÍ A ELEKTRICKÉM PŘIPOJENÍ.

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Line drawing of a hand turning a car wheel (no text or symbols)

Diagram of a mechanical component with concentric rings and a central shaft, labeled 'Symbolický' at bottom (no other text or symbols)

BE COOL

Black vertical tower-shaped electric fan with grid grille and ventilation slots (no visible text or symbols)

BLAHOPREJEME!

ĎAKUJEME, ŽE STE SA ROZHODLI PRE PRODUKT BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PREČÍTAJTE SI POZORNE TENTO NÁVOD PRED ZAČATÍM INŠTALÁCIE, PREVÁDZKY ALEBO ÚDRŽBY. CHRÁŇTE SEBA A INÝCH DODRŽIAVANÍM BEZPEČNOSTNÝCH POKYNOV. NEUPOSLUŠNÉ DODRŽIAVANIE POKYNOV MÔŽE VEDIET K ÚRAZOM A/ALEBO POŠKODENIU MAJETKU A/ALEBO STRATE NÁROKU NA ZÁRUKU!

DÔLEŽITÉ INFORMÁCIE O BEZPEČNOSTI, UMIESTNENÍ A ELEKTRICKOM PRIPOJENÍ.

Three black-and-white warning symbols: no hand, exclamation mark, and lightning bolt symbol

Pure mechanical part diagram showing two symmetrical cutaway views with no text or symbols

Mechanical assembly diagram showing a hand adjusting a gear with a rotating component (no text or symbols)

Line drawing of a hand adjusting a mechanical component with a circular component and a cylindrical shaft (no text or symbols)

Black vertical electric tower with grid ventilation grille and top-mounted base (no visible text or symbols)

FELICITĂRI!

VĂ MULTUMIM CĂ AȚI ALEAS UN PRODUS BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Mechanical assembly diagram showing a hand adjusting a gear component (no text or symbols visible)

Line drawing of a hand adjusting a mechanical component with a circular component and a cylindrical shaft (no text or symbols)

Black vertical tower with grid-patterned ventilation grille and a small top (no visible text or symbols)

GRATULUJEMY!

DZIEKUJEMY ZA WYBÓR PRODUKTU BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PROSIMY O UWAŻNE PRZECZYTANIE NINIEJSZEJ INSTRUKCJI PRZED ROZPOCZĘCIEM INSTALACJI, OBSŁUGI LUB KONSERWACJI. PROSIMY O ZACHOWANIE BEZPIECZEŃSTWA WŁASNEGO I INNYCH OSÓB, PRZESTRZEGAJĄC WSKAZÓWEK BEZPIECZEŃSTWA. NIEPRZESTRZEGANIE INSTRUKCJI MOŻE PROWADZIĆ DO OBRAŻEŃ CIAŁA I/LUB USZKODZENIA MIENIA I/LUB UTRATY PRAWA DO GWARANCJI!

WAŻNE INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA, LOKALIZACJI I PODŁĄCZENIA ELEKTRYCZNEGO.

BE COOL

Pure mechanical part diagram showing two symmetrical cutouts with a central shaft (no text or symbols)

Mechanical assembly diagram showing a hand adjusting a gear with a rotating component (no text or symbols)

Line drawing of a hand turning a car wheel with a screw and directional arrow (no text or symbols)

Black vertical electric tower with grid ventilation slots and a flat top (no visible text or symbols)

ČESTITAMO!

HVALA, DA STE SE ODLOČILI ZA IZDELEK BE COOL.

BE COOL

Aktualna navodila za uporabo in drugi jeziki

QR code image containing encoded data, no visible human-readable text

PREDEN ZAČNETE Z NAMESTITVIJO, UPORABO ALI VZDRŽEVANJEM, POZORNO PREBERITE TA NAVODILA. ZUPRAVITE SEBI IN DRUGIM, TAKO DA UPOSTEVAJTE VARNOSTNE NAVODILA. NEUPOŠTEVANJE NAVODIL LAHKO PRIPELJE DO POŠKODB OSEB IN/ALI PREMOŽENJA IN/ALI IZGUBE GARANCIJSKIH PRAVIC!

POMEMBNE INFORMACIJE O VARNOSTI, LOKACIJI IN ELEKTRIČNEM PRIKLJUČKU.

Namenska uporaba

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Simbolična slika

Mechanical assembly diagram showing a hand operating a gear with rotating components (no text or symbols)

Korak 3: Zategnite pritrdilni vijak (v smeri urinega kazalca) in napajalni kabel speljite skozi kabelski kanal na robu podstavka, da bo izdelek bolj raven in stabilen. S tem ste zaključili montažo stolpnega ventilatorja. Podstavek pritrdite z 2 priloženima vijakoma.

BE COOL

Line drawing of a hand turning a mechanical component with a screw and shaft (no text or symbols)

Simbolna slika

Black vertical outdoor air conditioner tower with grid grille and ventilation slots (no visible text or symbols)

ČESTITAMO! HVALA VAM ŠTO STE ODABRALI PROIZVOD TVRTKE BE COOL.

BE COOL

Trenutni priručnici za upotrebu i druge jezike

Preuzmite najnovije korisničke priručnike na raznim jezicima na www.becool.at/downloads ili skenirajte prikazani QR kod. Slijedite upute na web stranici.

QR code image containing encoded data, no visible human-readable text

MOLIMO VAS DA PAŽLJIVO PROČITATE OVE UPUTE PRIJE POČETKA S INSTALACIJOM, RADOM ILI SERVISIRANJEM. ZAŠTITITE SEBE I DRUGE PRIDRŽAVANJEM SIGURNOSNIH UPUTA. NEPRIMANJE UPUTA MOŽE REZULTIRATI OZLJEDAMA I/ILI OŠTEĆENJEM MATERIJALA I/ILI PONIŠTENJEM JAMSTVA!

VAŽNE INFORMACIJE O SIGURNOSTI, LOKACIJI I ELEKTRIČNOM PRIKLJUČKU.

Three black-and-white warning symbols: no hand, exclamation mark, and lightning bolt symbol

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

simbolična slika

Korak 2: Odvijte vijak za montažu s dna kućišta ventilatora, odmotajte kabel za napajanje i provucite ga kroz otvor u podnožju ventilatora. Zatim umetnite podnožje i okrenite ga kako biste osigurali da se dva utora savršeno poravnaju s kućištem.

Opasnost

Technical line drawing of a mechanical assembly with a hand operating a gear (no text or symbols)

Line drawing of a hand adjusting a mechanical component with a circular component and a cylindrical shaft (no text or symbols)

simbolična slika

Napomena: Imajte na umu da je normalno da se toranjski ventilator s funkcijom okretanja lagano ljulja ili djeluje nestabilno. To se radi kako bi se osiguralo da se ventilator ne prevrne odmah pri kontaktu i da funkcija okretanja ispravno radi.

Upravljačka ploča

okretni regulator (1) Brzina i oscilacija OK OFF OK OFF OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK ON / OFF /Timer

Black vertical outdoor air conditioner tower with grid grille and ventilation slots (no visible text or symbols)

CONGRATULATIONS!

THANK YOU FOR CHOOSING A BE COOL PRODUCT.

BE COOL

Current operating instructions and other languages

Download the latest operating instructions in various languages via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

QR code image containing encoded data, no visible human-readable text

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF WARRANTY COVERAGE!

IMPORTANT SAFETY, LOCATION AND ELECTRICAL CONNECTION INFORMATION.

Warning symbols including a hand holding a circle, an exclamation mark, and a warning triangle with lightning.

Intended use

BE COOL

The fan is designed exclusively for the ventilation of dry rooms.

It is intended for private use only and is not suitable for commercial use.

Only use the fan as described in these operating instructions.

1. Only use this appliance in accordance with the guidelines in the operating instructions. Any other use not recommended by the manufacturer could result in fire, electric shock or personal injury.

2. Remove the packaging and make sure that the unit is not damaged. If in doubt, do not use the unit and contact the service centre or your dealer.

3. Keep children away from packaging materials. There is a danger of choking if swallowed!

4. If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised service centre in order to avoid all possible risks.

5. Before connecting the appliance to the mains, check that the type of current and mains voltage correspond to the specifications on the appliance type plate.

6. The electrical socket in which you connect the unit must not be defective or loose and must be suitable for the required current load and, above all, reliably earthed.

7. Avoid using an extension cord as it could overheat and cause a fire.

8. It is forbidden to adapt or modify the characteristics of this appliance in any way and use only spare parts and accessories recommended by the manufacturer (failure to do so will invalidate the guarantee and warranty).

BE COOL

1. If the unit has a defect, switch it off and contact your dealer or the customer hotline.
2. Always and only contact customer service centres authorised by the manufacturer for any repairs to the appliance, mains plug or cable. You can find the service centres online at www.becool.at.
3. Children under the age of 8 and persons with reduced physical, mental, sensory or spiritual capabilities or lack of experience and knowledge should not use this appliance unless they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
4. Do not operate the unit unattended. If you leave the room, always switch off the unit.
5. Children must not play with the appliance.
6. Do not twist or bend the mains cable.
7. Do not use the appliance with wet hands.
8. Do not use the unit outdoors.
9. Never operate the unit in rooms where gas, oil or sulphur are present.
10. Do not use the unit near water or high humidity, e.g. in damp basements, next to swimming pools, bathtubs or showers. Make sure that no water enters the unit.
11. Do not place any objects on the unit.
12. Place the unit on a stable and level surface.
13. Never cover the unit.
14. Never insert fingers, pens or other objects into the unit and make sure that the air inlet and outlet are never blocked.

BE COOL

1. Always switch off the appliance before unplugging it from the mains.
2. Do not pull on the mains cable to disconnect the appliance from the mains power. Always pull on the plug to unplug the mains cable.
3. Do not handle the plug with wet hands to avoid electric shock.
4. Unplug the appliance when you are not using it, before cleaning it, when it needs maintenance or when it is moved from one place to another.
5. Keep the unit in good condition by maintaining and cleaning the unit. If you have any questions about maintenance, you can contact the customer hotline/service centre authorised by the manufacturer.
6. Keep and store the appliance in a safe, dry place out of reach of children when not in use.

BE COOL

Recycling, disposal, declaration of conformity

	RECYCLINGThe packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.
	DISPOSALThe symbol "crossed-out dustbin" requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally dangerous substances. Therefore, do not dispose of this in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. By doing so, you will help to protect resources and the environment. For more information, please contact your dealer or local authorities. Directive 2012/19/EU
	DECLARATION OF CONFORMITYWe hereby confirm that this article complies with the basic requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link:https://www.schuss-home.at/downloads

Errors and technical modifications excepted.

BE COOL

Technical information

If the fan has to be stored for a long time and is not used regularly, place the fan in its original packaging in a dry place. When using it for the first time after a long period of inactivity, make sure that the fan is clean and the motor blades are unrestricted (unit not powered).

Description of the unit

Rotary switch Air outlet Stand

Preparation

Before you start assembling the product, make sure that all parts are present. Included in delivery: Fan housing, fan base (base).

• Estimated assembly time: 15 minutes

Assembly

Step 1: Select the two halves of the base, align the groove and join them together to form a complete unit. Make sure that both halves of the base fit together properly.

BE COOL

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line and label 'Symbolic image' (no other text or symbols)

Step 2: Remove the fixing screw from the bottom of the fan housing, unwind the power cable and pass it through the hole in the fan base. Then add the base and rotate it to ensure that the two slots are perfectly aligned with the housing.

Attention

The mains cable is routed at the top of the fan base.

Diagram showing a mechanical assembly with a circular component and wires, labeled 'Symbolic image' (no readable text or symbols beyond label)

Mechanical assembly diagram showing a hand adjusting a gear with a rotating shaft (no text or symbols)

Step 3: Tighten the fixing screw (clockwise) and allow the power cable to pass through the cable duct on the edge of the base to make the product flatter and more stable. You have now completed the assembly of the tower fan. Secure the base with the 2 screws provided.

Line drawing of a hand adjusting a mechanical component with a tool (no text or symbols)

Diagram of a mechanical component with a circular base and internal striped structure, labeled 'Symbolic image' (no text or symbols on the diagram itself)

BE COOL

Note: Please note that it is normal that the tower fan with swivel function may wobble slightly or appear unstable. This is to ensure that the fan does not immediately fall over when touched and that it performs the swivel function properly.

Control panel

Rotary switch (1) Speed & Oscillation Rotary switch (2) ON / OFF /Timer

Speed & Oscillation (1)

• Turn the switch (1) to select the speed with or without oscillation.
  • 3 speeds are available for selection: (Low - Medium - High)

ON / OFF / Timer (2)

• You can programme an automatic switch-off time with the timer function. To set the function, turn the control dial to the desired time - you can select up to 120 minutes. After the set time has elapsed, the fan switches off automatically.
  • To deactivate the timer function, turn the control to "ON".
• Use the switch position "OFF" to switch off the fan.

BE COOL

CLEANING

NOTE: Always disconnect the mains plug from the socket before cleaning the appliance.

1. DO NOT immerse the unit in water or spray it with other liquids.
2. DO NOT use solvents or other chemical products for cleaning. Store the fan in a dry place when not in use.
3. When you stop using the fan at the end of the season, wipe off the dust to keep it in good condition for the next season. If necessary, dismantle the grille and remove the fan; clean it with a soft, damp cloth.

BE COOL

Technical information
Rated voltage	220-240V~
Frequency	50/60 Hz
Nominal power	50 Watt
Sound level	46 dB(A)
Dimensions	240×730×240 mm
Weight	2,35 kg
Information requirements of Regulation (EU) No. 206/2012
Article	BCTU76CMZ
Rated	220 -240 V
Protection	II
Power consumption when switched off (POFF)	0
Seasonal power consumption (Q)	11.8 kWh/a
Designation	Symbol	Value	Unit
Maximum volume flow	F	23.2	m3/min
Fan power consumption	P	36.8	W
Service ratio	SV	0.6	(m3/min)/W
Power consumption in standby mode	PSB	0	W
Fan sound power level	LWA	53	dB(A)
Maximum air velocity	c	2.6	m/s
Measurement standard for determining the service ratio	IEC 60879:2019
Contact addresses for further information and service line:	Schuss Home Electronic GmbHScheringgasse 3, A-1140 ViennaTel: [phone] - 0www.becool.atCompany register no.: 236974tCommercial Register Court: Vienna

BE COOL

GUARANTEE

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.

For this BE COOL unit we grant a warranty period of 2 years from the date of purchase, valid in Austria! If, contrary to expectations, service work should nevertheless be necessary on your unit during this period, we hereby guarantee to repair it free of charge (spare parts and labour) or (at the discretion of Schuss) to exchange the product. If neither repair nor exchange is possible for economic reasons, we reserve the right to issue a credit note for the current value.

In the case of air conditioners, please contact the customer hotline as a first step (see sticker on the unit or cover page of the operating instructions), in the case of fans, please contact your specialist dealer or us directly. We would like to point out that repair work that has not been carried out by the authorised contract workshop in Austria will immediately terminate the validity of this warranty.

This warranty does not cover:

• We do not accept any liability for consequential damage in the event of improper use.
• Repair or replacement of parts due to normal wear and tear
• Damage due to non-observance of the operating instructions
• Devices that are used - even only partially - for commercial purposes
- equipment mechanically damaged by external influence (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
• Equipment that has been improperly handled
• Units that have not been opened by our authorised service workshop.
- Damage caused as a result of improperly closed condensation drain valves of air conditioners or improperly inserted water tank.
• Consumer expectations not met.
• Damage caused by force majeure, water, lightning, overvoltage.
• Units where the type designation and/or serial number on the unit has been changed, deleted, made illegible or removed.
• services outside our authorised workshops, the transport costs to an authorised workshop or to us and back, and the associated risks.

We expressly point out that within the warranty period, a lump sum of € 60,- (indexed basis CPI 2010, June 2015) will be charged in case of operating errors or if no error was detected.

The provision of warranty service (repair or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the unit) and the corresponding warranty certificate, on which the type of unit as well as the serial number (visible on the box and on the back or bottom of the unit) must be noted! Without the warranty certificate, only the legal warranty applies!

We expressly point out that the statutory warranty rights are not affected by this guarantee and continue undiminished.

Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent. Liability for loss of profit, expected but not realised savings, consequential damage and damage from third party claims is excluded in any case. Damages to or for recorded data are always excluded from the liability for damages.

Congratulations on your choice. We wish you much pleasure with your BE COOL device!

ADDRESS

Schuss Home Electronic GmbH

A-1140 Vienna, Scheringgasse 3

Tel.: [phone]

Type designation: ....

Serial number: ....

In the event of a warranty claim, this warranty certificate must be handed over to the authorised service centre together with the unit.