Q: What is the maximum power consumption of this device?

The maximum power consumption of the Be Cool BC16KL2501GW is 1,520 watts (1.52 kW) in cooling mode, at 220-240 V, 50 Hz. You will also find: Cooling : 1,419 watts in normal operation Heating : 1,060 watts Standby mode (Wi-Fi off) : 0.9 watt Standby mode (Wi-Fi on) : 1.5 watts These values allow you to calculate energy consumption and verify that your electrical installation (circuit breaker, wiring) is suitable for this air conditioner.

Q: Why does the blue indicator light on the BC07AC60WF air conditioner blink when the unit is turned off?

The blinking of the blue indicator light when the unit is turned off is a normal behavior for the Be Cool BC07AC60WF. It indicates that the unit remains partially powered and ready to receive commands from the remote control. According to the manufacturer's documentation, the light turns on during the following actions: pressing the On/Off button, activating COOL mode, changing fan speed, activating the SWING function, triggering the mosquito function, or programming the timer. Even in off mode, the unit maintains a residual power supply to remain responsive to commands, which explains the blinking of the light. If you wish to completely cut off power to the unit and stop the blinking, you can unplug the unit from the wall outlet. This will not damage your air conditioner in any way and is safe.

Question 1

Where to buy a replacement motor for the Be Cool BC121TU2201F fan?

Accepted Answer

To purchase a replacement motor for your Be Cool BC121TU2201F fan, here are the recommended steps:

Direct contact with the manufacturer

The manufacturer of the fan is Schuss Home Electronic GmbH, based in Vienna, Austria:

Phone: +43 (1) 970 21-0
Website: www.becool.at
Address: Scheringgasse 3, A-1140 Vienna, Austria

They can provide you with the original motor compatible with the reference BC121TU2201F and direct you to a dealer or authorized service center.

Check your warranty

Your fan comes with a 2-year warranty from the date of purchase. If the motor fails within this period, repairs and parts replacements are covered free of charge at an authorized service center. In this case, do not attempt to replace it yourself - first contact the manufacturer or an authorized repairer to benefit from the warranty.

Motor specifications

To order the correct replacement motor, mention that your fan has the following specifications:

Total height: 121 cm
Rated power: 50W (input: 40.8W)
Power supply: 220-240V ~ 50-60 Hz
3 speeds (low, medium, high)

Question 2

How to activate the WiFi connection on the Be Cool BC12INKL2401FW air conditioner to use the mobile app?

Accepted Answer

The Be Cool BC12INKL2401FW air conditioner features 2.4 GHz WiFi connectivity allowing you to control the device via a mobile app. However, the available manual does not provide detailed steps for activating the WiFi.

To activate the WiFi function:

Check the WiFi indicator: the control screen has a WiFi indicator (marked "E" on the display panel)
Look for a WiFi or reset button: check the device's control panel for a WiFi activation or reset button
Download the Be Cool app: get the official Be Cool mobile app from the App Store or Google Play
Follow the pairing in the app: the app should guide you to add your air conditioner by scanning the QR code or selecting the device from your WiFi network

Note: The complete manual (283 pages) may contain the precise activation instructions. For further assistance, contact Be Cool support at +43 (1) 97 0 21 - 0 or visit www.becool.at.

Question 3

Where to install the fan protection grille?

Accepted Answer

The protection grille of the Be Cool BCPSN2L01 fan is installed at the front of the fan, at the level of the opening through which air is drawn in. This grille protects the motor and prevents objects or fingers from entering the fan while it is operating.

Installation:

Place the grille facing the front opening of the fan housing
The grille must be properly aligned with the edges of the opening
It generally snaps into place by simple pressure or clipping (without tools)
Make sure it is securely attached and does not move

Note: If your grille has clips or small tabs, insert them into the notches provided for this purpose on the housing. The BCPSN2L01 manual also mentions a filling filter for water (filter mesh), which is inserted into the filling opening of the tank.

Question 4

What is the maximum power consumption of this device?

Accepted Answer

The maximum power consumption of the Be Cool BC16KL2501GW is 1,520 watts (1.52 kW) in cooling mode, at 220-240 V, 50 Hz.

You will also find:

Cooling: 1,419 watts in normal operation
Heating: 1,060 watts
Standby mode (Wi-Fi off): 0.9 watt
Standby mode (Wi-Fi on): 1.5 watts

These values allow you to calculate energy consumption and verify that your electrical installation (circuit breaker, wiring) is suitable for this air conditioner.

Question 5

Why does the blue indicator light on the BC07AC60WF air conditioner blink when the unit is turned off?

Accepted Answer

The blinking of the blue indicator light when the unit is turned off is a normal behavior for the Be Cool BC07AC60WF. It indicates that the unit remains partially powered and ready to receive commands from the remote control.

According to the manufacturer's documentation, the light turns on during the following actions: pressing the On/Off button, activating COOL mode, changing fan speed, activating the SWING function, triggering the mosquito function, or programming the timer. Even in off mode, the unit maintains a residual power supply to remain responsive to commands, which explains the blinking of the light.

If you wish to completely cut off power to the unit and stop the blinking, you can unplug the unit from the wall outlet. This will not damage your air conditioner in any way and is safe.

User manual Be Cool : user manuals and guides in PDF

Models Be Cool most viewed

Browse manuals Be Cool by appliance type

Recent questions about devices Be Cool