BC29STTFD - Fan Be Cool - Free user manual and instructions

USER MANUAL BC29STTFD Be Cool

Black vertical tower with grid pattern and ventilation grille (no visible text or symbols)

HERZLICHEN GLÜCKWUNSCH!

QR code image containing encoded data, no visible human-readable text

Two technical diagrams showing cross-sectional views of mechanical components, one with a gear-like cut and the other concentric circles (no text or symbols)

BE COOL

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Line drawing of a hand turning a mechanical component with a screw and shaft (no text or symbols)

Diagram of a mechanical component with concentric rings and a central shaft, labeled 'Symbolbild' (no other text or symbols)

Black vertical electric fan tower with grid and ventilation grille (no visible text or symbols)

FÉLICITATIONS! MERCI D'AVOIR CHOISI UN PRODUIT BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

VEUILLEZ LIRE ATTENTIVEMENT CE MODE D'EMPLOI AVANT DE COMMENCER L'INSTALLATION, L'UTILISATION OU L'ENTRETIEN. PROTÉGEZ-VOUS ET PROTÉGEZ LES AUTRES EN RESPECTANT LES CONSIGNES DE SÉCURITÉ. LE NON-RESPECT DES INSTRUCTIONS POURRAIT ENTRAÎNER DES DOMMAGES CORPORELS ET/OU MATÉRIELS ET/OU LA PERTE DU DROIT À LA GARANTIE !

INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ, L'EMPLACEMENT ET LE RACCORDEMENT ÉLECTRIQUE.

Warning symbols including a hand holding a prohibition sign, an exclamation mark, and a lightning bolt symbol

Utilisation prévue

BE COOL

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line extending from the center, resembling a stylized spiral or vortex (no text or symbols)

Image symbolique

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols visible)

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Image symbolique

Line drawing of a hand turning a car wheel (no text or symbols)

Pure technical diagram of a mechanical component with concentric circles and internal lines, no text or symbols present.

Image symbolique

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

CONGRATULAZIONI! GRAZIE PER AVER SCELTO UN PRODOTTO BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

LEGGERE ATTENTAMENTE QUESTE ISTRUZIONI PRIMA DI INIZIARE L'INSTALLAZIONE, IL FUNZIONAMENTO O LA MANUTENZIONE. PROTEGGERE SE STESSI E GLI ALTRI SEGUENDO LE ISTRUZIONI DI SICUREZZA. LA MANCATA OSSERVANZA DELLE ISTRUZIONI PUÒ CAUSARE LESIONI PERSONALI E/O DANNI MATERIALI E/O LA PERDITA DELLA COPERTURA DELLA GARANZIA!

IMPORTANTI INFORMAZIONI SULLA SICUREZZA, L'UBICAZIONE E IL COLLEGAMENTO ELETTRICO.

Uso previsto

BE COOL

Pure mechanical cross-section diagram without any text, numbers, or symbols

Diagram of concentric circles with a diagonal line extending outward, resembling a stylized spiral or vortex (no text or symbols)

Immagine simbolica

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols)

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Immagine simbolica

Line drawing of a hand turning a car wheel (no text or symbols)

Diagram of a mechanical component with a circular base and internal striped structure, labeled 'Immagine' (no other text or symbols)

graph LR
    A["Top Panel"] --> B["Side Panel"]
    B --> C["Internal Component"]
    C --> D["Bottom Panel with Internal Components"]

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

GEFELICITEERD! BEDANKT VOOR HET KIEZEN VAN EEN PRODUCT VAN BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

LEES DEZE INSTRUCTIES ZORGVULDIG DOOR VOORDAT U BEGINT MET DE INSTALLATIE, HET GEBRUIK OF HET ONDERHOUD. BESCHERM UZELF EN ANDEREN DOOR DE VEILIGHEIDSINSTRUCTIES OP TE VOLGEN. HET NIET OPVOLGEN VAN DE INSTRUCTIES KAN LEIDEN TOT PERSOONLIJK LETSEL EN/OF MATERIËLE SCHADE EN/OF VERLIES VAN DE GARANTIEDEKKING!

BELANGRIJKE INFORMATIE OVER VEILIGHEID, LOCATIE EN ELEKTRISCHE AANSLUITING.

Warning symbols including a hand holding a circle, an exclamation mark, and a lightning bolt symbol

Beoogd gebruik

BE COOL

Two abstract geometric diagrams showing circular and concentric shapes with internal lines, no text or symbols present.

Symbolisch beeld

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols)

Symbolisch beeld

Mechanical assembly diagram showing a hand adjusting a gear with a rotating component (no text or symbols)

Opgelet

Line drawing of a hand turning a mechanical component with a tool, no text or symbols present

Pure technical diagram of a mechanical component with concentric circles and centerlines, no text or symbols present.

Symbolisch beeld

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

QR code image containing encoded data, no visible human-readable text

Warning symbols including a hand holding a prohibition sign, an exclamation mark, and a lightning bolt symbol

Uso previsto

BE COOL

Two abstract geometric diagrams showing circular and concentric shapes with internal lines, no text or symbols present.

Imagen simbólica

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols)

Imagen simbólica

Line drawing of a hand adjusting a mechanical component with a circular housing (no text or symbols)

Atención

Line drawing of a hand turning a car wheel with a screw and directional arrow (no text or symbols)

Pure technical diagram of a mechanical component with concentric circles and crosshairs (no text or symbols)

Imagen simbólica

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

GRATULUJEME! DĚKUJEME, ŽE JSTE SI VYBRALI PRODUKT OD SPOLEČNOSTI BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PŘED ZAHÁJENÍM INSTALACE, PROVOZU NEBO ÚDRŽBY SI POZORNĚ PŘEČTĚTE TENTO NÁVOD. DODRŽOVÁNÍM BEZPEČNOSTNÍCH POKYNŮ CHRÁNÍTE SEBE I OSTATNÍ. NEDODRŽENÍ POKYNŮ MŮŽE MÍT ZA NÁSLEDEK ZRANĚNÍ OSOB A/NEBO POŠKOZENÍ MAJETKU A/NEBO ZTRÁTU ZÁRUČNÍHO KRYTÍ!

DŮLEŽITÉ INFORMACE O BEZPEČNOSTI, UMÍSTĚNÍ A ELEKTRICKÉM PŘIPOJENÍ.

Warning symbols including a hand holding a prohibition sign, an exclamation mark, and a lightning bolt symbol

Zamýšlené použití

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line extending outward, resembling a stylized spiral or vortex (no text or symbols)

Symbolický obraz

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols visible)

Mechanical assembly diagram showing a hand adjusting a gear with rotational motion arrows (no text or symbols)

Symbolický obraz

Pozor

Line drawing of a hand turning a car wheel (no text or symbols)

Pure technical line drawing of a mechanical component with concentric circles and centerlines (no text or symbols)

Symbolický obraz

graph LR
    A["Top Left Panel"] --> B["Side Panel"]
    B --> C["Side Panel with Circular Component"]
    C --> D["Top Right Panel with Box and Cover"]

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

GRATULUJEME! ĎAKUJEME, ŽE STE SI VYBRALI PRODUKT OD SPOLOČNOSTI BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PRED ZAČATÍM INŠTALÁCIE, PREVÁDZKY ALEBO ÚDRŽBY SI POZORNE PREČÍTAJTE TIETO POKYNY.

DODRŽIAVANÍM BEZPEČNOSTNÝCH POKYNOV CHRÁŇTE SEBA AJ OSTATNÝCH. NEDODRŽANIE POKYNOV MÔŽE MAŤ ZA NÁSLEDOK ZRANENIE OSÔB A/ALEBO

POŠKODENIE MAJETKU A/ALEBO STRATU ZÁRUČNÉHO KRYTIA!

DÔLEŽITÉ INFORMÁCIE O BEZPEČNOSTI, UMIESTNENÍ A ELEKTRICKOM PRIPOJENÍ.

Warning symbols including a hand holding a prohibition sign, a warning triangle with an exclamation mark, and a lightning bolt symbol.

Zamýšl'ané použitie

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Pure geometric diagram of concentric circles and a diagonal line, no text or symbols present

Symbolický obraz

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols visible)

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Symbolický obraz

Pozor

Line drawing of a hand turning a car wheel with a screw and battery (no text or symbols)

Pure technical diagram of a mechanical component with concentric circles and internal striped structure (no text or symbols)

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

FELICITĂRI! VĂ MULȚUMIM CĂ AȚI ALES UN PRODUS BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

VĂ RUGĂM SĂ CITIȚI CU ATENȚIE ACESTE INSTRUCTȚIUNI ÎNAINTE DE A ÎNCEPE INSTALAREA, FUNCTIONAREA SAU ÎNTRETINEREA. PROTEJAȚI-VĂ PE DUMNEAVOASTRĂ ȘI PE CEILALȚI RESPECTÂND INSTRUCTȚIUNILE DE SIGURANȚĂ. NERESPECTAREA INSTRUCTȚIUNILOR AR PUTEA DUCE LA VĂTĂMĂRI CORPORALE ȘI/SAU DAUNE MATERIALE ȘI/SAU PIERDEREA ACOPERIRII GARANTIEI!

INFORMATII IMPORTANTE PRIVIND SIGURANTA, AMPLASAREA ŞI CONECTAREA ELECTRICĂ.

Two abstract geometric diagrams showing circular and concentric shapes with internal lines, no text or symbols present.

Imagine simbolică

BE COOL

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols visible)

Imagine simbolică

Mechanical assembly diagram showing a hand adjusting a circular component with a bolt (no text or symbols visible)

Atentie

Line drawing of a hand turning a mechanical component with a tool, no text or symbols present

Pure technical diagram of a mechanical component with concentric circles and internal features (no text or symbols)

Imagine simbolică

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

GRATULACJE! DZIĘKUJEMY ZA WYBRANIE PRODUKTU OD BE COOL.

BE COOL

QR code image containing encoded data, no visible human-readable text

PRZED ROZPOCZEĘCIEM INSTALACJI, OBSŁUGI LUB KONSERWACJI NALEŻY UWAŻNIE PRZECZYTAĆ NINIEJSZĄ INSTRUKCJĘ. NALEŻY CHRONIĆ SIEBIE I INNYCH POPRZEZ PRZESTRZEGANIE INSTRUKCJI BEZPIECZEŃSTWA. NIEPRZESTRZEGANIE INSTRUKCJI MOŻE SKUTKOWAĆ OBRAŻENIAMI CIAŁA I/LUB USZKODZENIEM MIENIA I/LUB UTRATĄ GWARANCJI!

WAŻNE INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA, LOKALIZACJI I PODŁĄCZENIA ELEKTRYCZNEGO.

Przeznaczenie

BE COOL

Two technical diagrams showing cross-sectional views of mechanical components, one with a gear-like cut and the other concentric circles (no text or symbols)

BE COOL

Mechanical assembly diagram showing a hand turning a gear with a rotating shaft (no text or symbols)

Line drawing of a hand turning a car wheel (no text or symbols)

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

ČESTITAMO! HVALA, KER STE IZBRALI IZDELEK BE COOL.

BE COOL

Aktualna navodila za uporabo in drugi jeziki

QR code image containing encoded data, no visible human-readable text

PRED ZAČETKOM NAMESTITVE, DELOVANJA ALI VZDRŽEVANJA NATANČNO PREBERITE TA NAVODILA. Z UPOŠTEVANJEM VARNOSTNIH NAVODIL ZAŠČITITE SEBE IN DRUGE. NEUPOŠTEVANJE NAVODIL LAHKO POVZROČI TELESNE POŠKODBE IN/ALI MATERIALNO ŠKODO IN/ALI IZGUBO GARANCIJSKEGA KRITJA!

POMEMBNE INFORMACIJE O VARNOSTI, LOKACIJI IN ELEKTRIČNEM PRIKLJUČKU.

Predvidena uporaba

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Simbolna podoba

BE COOL

Mechanical assembly diagram showing a hand turning a gear with a rotating shaft (no text or symbols)

Line drawing of a hand fastening a mechanical component with a screw and shaft (no text or symbols)

Simbolna podoba

Black vertical outdoor air conditioner tower with grid and ventilation slots (no visible text or symbols)

ČESTITAMO! HVALA VAM ŠTO STE ODABRALI PROIZVOD BE COOL.

BE COOL

Aktualne upute za uporabu i drugi jezici

Preuzmite najnovije upute za uporabu na raznim jezicima putem poveznice www.becool.at/downloads ili skenirajte prikazani QR kod. Slijedite upute na web stranici.

QR code image containing encoded data, no visible human-readable text

MOLIMO VAS PROČITAJTE OVE UPUTE PAŽLJIVO PRIJE UGRADNJE, RADA ILI ODRŽAVANJA. ZAŠTITITE SEBE I DRUGE PRIDRŽAVANJEM SIGURNOSNIH UPUTA. NEPRIDRŽAVANJE UPUTA MOŽE REZULTIRATI OSOBNIM I/ILI ŠTETAMA NA IMOVINI I/ILI PONIŠTENJEM JAMSTVA!

VAŽNE INFORMACIJE O SIGURNOSTI, LOKACIJI I ELEKTRIČNOM POVEZIVANJU.

Namjena

Ventilator je namijenjen isključivo za ventilaciju suhih prostorija. Namijenjen je isključivo za privatnu uporabu i nije prikladan za komercijalnu uporabu.

BE COOL

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line and label 'Symbolbild' (no other text or symbols)

BE COOL

Korak 2: Uklonite pričvrsni vijak s dna kućišta ventilatora, odmotajte kabel za napajanje i provucite ga kroz rupu u postolju ventilatora. Zatim dodajte bazu i zakrenite je kako biste bili sigurni da su dva utora savršeno poravnata s kućištem.

Opasnost

Technical line drawing of a mechanical assembly with a hand operating a gear (no text or symbols)

Line drawing of a hand turning a car wheel component with a tool, no text or symbols present

Diagram of a mechanical component with concentric rings and a central shaft, labeled 'Symbolbild' (no other text or symbols)

Napomena: Imajte na umu da je normalno da se toranjski ventilator s funkcijom zakretanja lagano klati ili djeluje nestabilno. Ovo je učinjeno kako bi se osiguralo da se ventilator ne prevrne odmah kada se dodirne i da ispravno obavlja funkciju ljuljanja.

BE COOL

daljinski upravljač

Pripremite daljinski upravljač – umetnite ili zamijenite bateriju

Black vertical electric fan tower with grid grille and top-mounted heat sink (no visible text or symbols)

CONGRATULATIONS! THANK YOU FOR CHOOSING A PRODUCT FROM BE COOL.

BE COOL

Current operating instructions and other languages

Download the latest operating instructions in various languages via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

QR code image containing encoded data, no visible human-readable text

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF WARRANTY COVERAGE!

IMPORTANT SAFETY, LOCATION AND ELECTRICAL CONNECTION INFORMATION.

Intended use

The fan is designed exclusively for the ventilation of dry rooms.

BE COOL

It is intended for private use only and is not suitable for commercial use.

Only use the fan as described in these operating instructions.

1. Only use this appliance in accordance with the guidelines in the operating instructions. Any other use not recommended by the manufacturer could result in fire, electric shock or personal injury.

2. Remove the packaging and make sure that the unit is not damaged. If in doubt, do not use the unit and contact the service centre or your dealer.

3. Keep children away from packaging materials. There is a ____ danger of choking if swallowed!

4. If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised service centre in order to avoid all possible risks.

5. Before connecting the appliance to the mains, check that the type of current and mains voltage correspond to the specifications on the appliance type plate.

6. The electrical socket in which you connect the unit must not be defective or loose and must be suitable for the required current load and, above all, reliably earthed.

7. Avoid using an extension cord as it could overheat and cause a fire.

8. It is forbidden to adapt or modify the characteristics of this appliance in any way and use only spare parts and accessories recommended by the manufacturer (failure to do so will invalidate the guarantee and warranty).

9. If the unit has a defect, switch it off and contact your dealer or the customer hotline.

BE COOL

1. Always and only contact customer service centres authorised by the manufacturer for any repairs to the appliance, mains plug or cable. You can find the service centres online at www.becool.at.

2. Children under the age of 8 and persons with reduced physical, mental, sensory or spiritual capabilities or lack of experience and knowledge should not use this appliance unless they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

3. Do not operate the unit unattended. If you leave the room, always switch off the unit.

4. Children must not play with the appliance.

5. Do not twist or bend the mains cable.

6. Do not use the appliance with wet hands.

7. Do not use the unit outdoors.

8. Never operate the unit in rooms where gas, oil or sulphur are present.

9. Do not use the unit near water or high humidity, e.g. in damp basements, next to swimming pools, bathtubs or showers. Make sure that no water enters the unit.

10. Do not place any objects on the unit.

11. Place the unit on a stable and level surface.

12. Never cover the unit.

13. Never insert fingers, pens or other objects into the unit and make sure that the air inlet and outlet are never blocked.

14. Always switch off the appliance before unplugging it from the mains.

BE COOL

1. Do not pull on the mains cable to disconnect the appliance from the mains power. Always pull on the plug to unplug the mains cable.

2. Do not handle the plug with wet hands to avoid electric shock.

3. Unplug the appliance when you are not using it, before cleaning it, when it needs maintenance or when it is moved from one place to another.

4. Keep the unit in good condition by maintaining and cleaning the unit. If you have any questions about maintenance, you can contact the customer hotline/service centre authorised by the manufacturer.

5. Keep and store the appliance in a safe, dry place out of reach of children when not in use.

BE COOL

Recycling, disposal, declaration of conformity

	RECYCLINGThe packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.
	DISPOSALThe symbol "crossed-out dustbin" requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally dangerous substances. Therefore, do not dispose of this in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. By doing so, you will contribute to the protection of resources and the environment. For more information, please contact your dealer or local authorities. Directive 2012/19/EU
	BATTERY DISPOSALIn accordance with Legislative Decree 188 of 20 November 2008 transposing Directive 2006/66/EC on batteries, accumulators and related waste, the crossed-out wheeled bin symbol on the battery indicates that it is prohibited to dispose of waste batteries in household waste.Batteries and accumulators contain highly polluting substances. The user is obliged to dispose of used batteries at the collection points in the municipality or in the appropriate containers. The service is free of charge. In this way, the legal requirements are met and the environment is protected.You will find these signs on batteries:Li = battery contains lithiumAl = battery contains alkaliMn = battery contains manganeseCR 2025 (Li); AA (Al, Mn); AAA (Al, Mn)
	DECLARATION OF CONFORMITYWe hereby confirm that this article complies with the basic requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link:https://www.schuss-home.at/downloads

Errors and technical modifications excepted.

BE COOL

Technical information

If the fan has to be stored for a long time and is not used regularly, place the fan in its original packaging in a dry place. When using it for the first time after a long period of inactivity, make sure that the fan is clean and the motor blades are unrestricted (unit not powered).

Preparation

Before you start assembling the product, make sure that all parts are present. Included in the delivery: fan housing, fan foot (base) and remote control.

• Estimated assembly time: 15 minutes

Assembly

Step 1: Select the two halves of the base, align the groove and join them together to form a complete unit. Make sure that both halves of the base fit together properly.

Pure mechanical cross-section diagram showing two symmetrical components with no text or symbols

Diagram of concentric circles with a diagonal line extending outward, resembling a stylized spiral or vortex (no text or symbols)

Symbolic image

BE COOL

Step 2: Remove the fixing screw from the bottom of the fan housing, unwind the power cable and pass it through the hole in the fan base. Then add the base and rotate it to ensure that the two slots are perfectly aligned with the housing.

Diagram of a mechanical assembly with a tool interacting with a circular component (no text or symbols)

Symbolic image

Technical line drawing of a mechanical assembly with a hand adjusting a circular component (no text or symbols)

Attention

The mains cable is routed at the top of the fan base.

Step 3: Tighten the fixing screw (clockwise) and allow the power cable to pass through the cable duct on the edge of the base to make the product flatter and more stable. You have now completed the assembly of the tower fan. Secure the base with the 2 screws provided.

Line drawing of a hand turning a car wheel (no text or symbols)

Pure technical diagram of a mechanical component with concentric circles and internal features (no text or symbols)

Symbolic image

Note: Please note that it is normal that the tower fan with swivel function may wobble slightly or appear unstable. This is to ensure that the fan does not immediately fall over when touched and that it performs the swivel function properly.

BE COOL

Remote control

Preparing the remote control - Inserting or replacing the battery

Please follow the instructions below:

Initial operation:

To operate the remote control for the first time, please pull out the plastic protector from the battery compartment on the back of the remote control.

Change battery:

Pull out the battery holder on the back of the remote control and remove the old battery from the holder:

graph LR
    A["Top Panel"] --> B["Side Panel"]
    B --> C["Display"]
    C --> D["Bottom Panel"]

Now insert a new CR2025 battery, always paying attention to the polarity markings (+/-) on the battery and the battery holder.

Then push the battery holder fully back into the remote control.

A POWER B SPEED OSC C D TIMER MODE E BE COOL

A: On/Off button (1)

B: SPEED button (4)

C: Oscillation button (2)

D: Timer button (5)

E: MODE button (3)

BE COOL

Control panel

1 2 3 4 5 POWER ONCILLATE 26 € ≈ 26 36 36 1h 2h 4h 8h BE

POWER button (1):

Press the ON/OFF button to switch the unit on or off.

To operate the fan and ambient lighting:

• Press the on/off button once to switch on the fan and the ambient lighting.
• Press the on/off button again to switch off the fan while the ambient lighting remains on.
• If you want to switch off the ambient lighting separately, press and hold the on/off button for 3 seconds and then press it again for 3 seconds to switch off the ambient lighting.

Please note that you can only perform this special action using the buttons on the unit itself.

OSCILATE button (2):

Press the button to activate the fan's swivel function. Press again to deactivate the swivel function.

MODE button (3):

3 different wind modes can be selected: normal, sleep and natural mode.

SPEED button (4):

BE COOL

When operating the fan, press the Speed button to set the speed to low, medium or high to .

TIMER button (5):

The setting is from 1 hour up to 8 hours. Each additional button press adds one hour until a maximum of 8 hours is reached. You can orientate yourself accordingly by the LED display on top of the tower fan.

CLEANING

NOTE: Always disconnect the mains plug from the socket before cleaning the appliance.

1. DO NOT immerse the unit in water or spray it with other liquids.
2. DO NOT use solvents or other chemical products for cleaning. Store the fan in a dry place when not in use.
3. When you stop using the fan at the end of the season, wipe off the dust to keep it in good condition for the next season. If necessary, dismantle the grille and remove the fan; clean it with a soft, damp cloth.

BE COOL

Technical information
Rated voltage	220-240V~
Frequency	50/60 Hz
Nominal power	50 Watt
Sound level	46 dB(A)
Dimensions	240×730×240 mm
Weight	2,35 kg
Information requirements of Regulation (EU) No. 206/2012
Article	BC29STTFD
Rated	220 -240 V
Protection	II
Power consumption when switched off (POFF)	0
Seasonal power consumption (Q)	13.4 kWh/a
Designation	Symbol	Value	Unit
Maximum volume flow	F	19.8	m3/min
Fan power consumption	P	41.8	W
Service ratio	SV	0.47	(m3/min)/W
Power consumption in standby mode	PSB	0	W
Fan sound power level	LWA	53	dB(A)
Maximum air velocity	c	4.8	m/s
Measurement standard for determining the service ratio	IEC 60879:2019
Contact addresses for further information and service line:	Schuss Home Electronic GmbHScheringgasse 3, A-1140 ViennaTel: [phone] - 0www.becool.atFB-No: 236974 t / FB-Court: Vienna

BE COOL

GUARANTEE

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.

For this BECOOL appliance we grant a guarantee period of 2 years from the date of purchase, valid in Austria! If, contrary to expectations, service work should nevertheless be necessary on your appliance during this period, we hereby guarantee to repair it free of charge (spare parts and labour) or (at the discretion of Schuss) to exchange the product. Should neither repair nor exchange be possible for economic reasons, we reserve the right to issue a current value credit note.

In the case of air conditioners, please contact the customer hotline as a first step (see sticker on the unit or cover page of the operating instructions), in the case of fans, please contact your specialist dealer or us directly. We would like to point out that repair work that has not been carried out by the authorised contract workshop in Austria will immediately terminate the validity of this warranty.

This warranty does not cover:

• We do not accept any liability for consequential damage in the event of improper use.
• Repair or replacement of parts due to normal wear and tear
• Damage due to non-observance of the operating instructions
• Devices that are used - even only partially - for commercial purposes
• equipment mechanically damaged by external influence (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
• Equipment that has been improperly handled
• Units that have not been opened by our authorised service workshop.
• Damage caused as a result of improperly closed condensation drain valves of air conditioners or improperly inserted water tank.
• Consumer expectations not met.
• Damage caused by force majeure, water, lightning, overvoltage.
• Units where the type designation and/or serial number on the unit has been changed, deleted, made illegible or removed.
• Services outside our authorised workshops, the transport costs to an authorised workshop or to us and back, and the associated risks.

We expressly point out that within the warranty period, a lump sum of € 60,- (indexed basis CPI 2010, June 2015) will be charged in case of operating errors or if no error was detected.

The provision of warranty service (repair or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the unit) and the corresponding warranty certificate, on which the type of unit as well as the serial number (visible on the box and on the back or bottom of the unit) must be noted! Without the warranty certificate, only the legal warranty applies!

We expressly point out that the statutory warranty rights are not affected by this guarantee and continue undiminished.

Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent. Liability for loss of profit, expected but not realised savings, consequential damage and damage from third party claims is excluded in any case. Damages to or for recorded data are always excluded from the liability for damages.

Congratulations on your choice. We hope you enjoy your BE COOL appliance!

ADDRESS

Schuss Home Electronic GmbH

A-1140 Vienna, Scheringgasse 3

In the event of a warranty claim, this warranty certificate must be handed over to the authorised service centre together with the unit.