X41 SW+ - Robot vacuum MEDION - Free user manual and instructions

USER MANUAL X41 SW+ MEDION

White robotic vacuum cleaner with a compact unit and a smaller white device labeled 'medon' (no visible text or symbols on the device body)

Smarter Saug-Wischroboter

mit Absaugstation

Smart robot vacuum and mop

with dust collector

MEDION X41 SW+ (MD 14841)

Inhaltsverzeichnis

DE

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Line drawing of a multi-level electronic device with front panel and control panel (no text or symbols)

Two identical mechanical tripod-like structures with no text or symbols

Simple 3D illustration of a rectangular block with vertical striped pattern (no text or symbols)

16

□

Technical line drawing of a mechanical component with mounting holes and a curved base (no text or symbols)

19
20

21
Abb. 4 - Zubehör

Technical line drawing of a circular mechanical component with internal ribs and central hub (no text or symbols)

Technical diagram of a mechanical assembly with cross-section and top view, showing internal components and tool path (no text or labels)

0.5m 1.5m 0.5m

Line drawing of a robotic vacuum cleaner with a square chamber and circular base (no text or symbols)

Abb. 11 - Akkublock laden

LB03/AAA Micro LR03/AAA Micro

Line drawing of a robotic vacuum cleaner with a circular housing and mounting base (no text or symbols)

Line drawing of hands using a tool to adjust or install electronic components on a device casing (no text or symbols)

Technical line drawing of a device housing with internal components and an arrow indicating direction (no text or symbols)

Technical line drawing of a robotic vacuum cleaner with mounting bracket and control panel (no text or symbols)

Diagram showing two circular symbols with 'No' and 'Yes' signs, connected by a line labeled '100' indicating a distance or threshold.

✓A ✓B C D

QR code image containing encoded data, no visible human-readable text

Line drawing of a robotic vacuum cleaner with a circular housing and attached components (no text or symbols)

Line drawing of a hand inserting a device into a computer tower (no text or symbols)

Technical line drawing of a circular device interior with internal components and a hand pointing to a component (no text or symbols)

Abb. 22 - Sturzsensoren reinigen

Technical line drawing of a vehicle front panel showing internal components and assembly (no text or symbols)

Technical line drawing of a mechanical component with a vertical rod and base plate (no text or symbols)

Technical line drawing of a mechanical device with a container containing granular material (no text or symbols)

Line drawing of a faucet spraying water onto an open refrigerator (no text or symbols)

Technical line drawing of a car interior with structural components and an arrow indicating assembly (no text or symbols)

Technical line drawing of a circular electronic device with internal components and hands operating (no text or symbols)

Technical line drawing of a mechanical assembly with a hand operating a tool (no text or symbols present)

Line drawing of a hand holding a tool, with no text or symbols present

Technical diagram of a circular device with internal components and a hand operating the base (no text or symbols visible)

Technical line drawing of a robotic vacuum cleaner with hands installing components (no text or symbols)

Abb. 32 – Vortriebräder reinigen

www.medion.com/conformity.

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Technical diagram of a device interior with numbered components and labeled parts in Chinese

Line drawing of a multi-level electronic device with front panel and control panel (no text or symbols)

Simple 3D illustration of a rectangular block with vertical lines on its top face (no text or symbols)

16

□

19
20
21
Fig. 4 - Accessoires

Technical line drawing of a circular mechanical component with internal components and directional arrows (no text or symbols)

Technical line drawing of a mechanical assembly with an inset close-up showing a pin and rotor (no text or symbols)

0.5m 1.5m 0.5m

Fig. 10 – Installation de la station de vidange/charge

Line drawing of a robotic vacuum cleaner with a rectangular housing and circular base (no text or symbols)

Line drawing of a robotic vacuum cleaner with a circular housing and mounting base, showing internal components and a downward arrow indicating motion (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

Technical line drawing of a device casing with internal components and an arrow indicating direction (no text or symbols)

Technical line drawing of a robotic vacuum cleaner with internal components and mounting bracket (no text or symbols)

Diagram showing two circular icons with Chinese text '不安全' (no security) and a distance marker '40' between them, surrounded by dashed boxes.

✓A ✓B C D

QR code image containing encoded data, no visible human-readable text

Technical line drawing of a robotic vacuum cleaner with a circular housing and mounting bracket (no text or symbols)

Line drawing of a hand inserting a device into a computer tower (no text or symbols)

Technical line drawing of a circular device interior with internal components and a hand pointing to a component (no text or symbols)

Technical line drawing of a vehicle front panel showing internal components and assembly (no text or symbols)

Line drawing of a vehicle rearview with a handle and seat (no text or symbols)

Technical line drawing of a mechanical device pouring liquid into a container (no text or symbols)

Line drawing of a faucet spraying water into a shared toilet (no text or symbols)

Technical line drawing of a car interior with internal compartments and ventilation slots (no text or symbols)

Technical line drawing of a circular device with internal components and hands operating it (no text or symbols)

Fig. 28 - Retirer la brosse

Technical line drawing of a mechanical assembly with rotating components and a hand adjusting a component (no text or symbols)

Line drawing of a hand holding a tool, no text or symbols present

Technical diagram of a circular device with internal components and a hand operating the base (no text or symbols)

Fig. 31 - Retirer la roue directrice

Technical line drawing of a robotic vacuum cleaner with hands adjusting the component (no text or symbols)

www.medion.com/conformity.

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Technical diagram of a device interior with numbered components and labeled parts in Chinese

Afb. 2 - Onderkant

Line drawing of a multi-level electronic device with front panel and control panel (no text or symbols)

Simple 3D illustration of a rectangular block with vertical striped pattern (no text or symbols)

16

□

Technical line drawing of a mechanical component with mounting holes and a curved base (no text or symbols)

19

20
Afb. 4 - Accessoires

1. Vulopening
2. Watertank

21 29 33 32 31 30

Technical line drawing of a circular mechanical component with internal ribs and central hub (no text or symbols)

Technical diagram of a mechanical assembly with cross-section and top view, showing internal components and tool path (no text or labels)

0.5m 1.5m 0.5m

Afb. 10 - Afzuig-/laadstation opstellen

Line drawing of a robotic vacuum cleaner with a square chamber and circular base (no text or symbols)

Afb. 11 - Accu opladen

LB03/AAA Micro LR03/AAA Micro

Line drawing of a robotic vacuum cleaner with a circular housing and mounting base, showing internal components and a directional arrow (no text or symbols)

Line drawing of hands installing or adjusting a mechanical component on a device (no text or symbols)

Technical line drawing of a device housing with internal components and an arrow indicating direction (no text or symbols)

Technical line drawing of a robotic vacuum cleaner with mounting bracket and control panel (no text or symbols)

Diagram showing two circular symbols with prohibition signs inside dashed boxes, likely indicating no restrictions or absence of a symbol.

✓A ✓B C D

QR code image containing encoded data, no visible human-readable text

Technical line drawing of a robotic vacuum cleaner with a circular housing and attached components (no text or symbols)

Line drawing of a computer tower with a hand pointing to the front panel (no text or symbols)

Afb. 21 – Laadcontacten reinigen

Top-down schematic of a robotic device showing internal components and a hand interacting with the interior (no text or labels)

Afb. 22 – Valsensoren reinigen

Technical line drawing of a vehicle front view showing internal components and assembly (no text or symbols)

Technical line drawing of a mechanical component with a vertical rod inserted (no text or symbols)

Technical line drawing of a mechanical device pouring liquid into a container (no text or symbols)

Afb. 25 - Stofreservoir legen

Line drawing showing a faucet spraying water into a water dispenser (no text or symbols)

Afb. 26 - Stofreservoir reinigen

Technical line drawing of a car interior with open door, compartments, and fan base (no text or symbols)

Technical line drawing of a circular device with internal components and hands operating (no text or symbols)

Technical line drawing of a mechanical assembly with rotating components and a hand adjusting a component (no text or symbols)

Line drawing of a hand holding a tool, no text or symbols present

Technical diagram of a circular device with internal components and a hand interacting with one (no text or symbols present)

Technical line drawing of a robotic vacuum cleaner with hands adjusting the component (no text or symbols)

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Technical diagram of a device interior with numbered components, likely for assembly or maintenance reference.

Fig. 2 - Parte inferior

Line drawing of a multi-level electronic device with front panel and control panel (no text or symbols)

Simple 3D illustration of a rectangular block with vertical lines on its top face (no text or symbols)

16

□

Technical line drawing of a mechanical component with mounting holes and a curved base (no text or symbols)

19

Technical line drawing of a circular mechanical component with internal components and directional arrows (no text or symbols)

Technical diagram of a mechanical assembly with cross-section and top view, showing internal components and tool path (no text or labels)

0.5m 1.5m 0.5m

Line drawing of a robotic vacuum cleaner with a rectangular unit and circular base (no text or symbols)

LB03/AAA Micro LR03/AAA Micro

Line drawing of a robotic vacuum cleaner with a circular housing and mounting bracket (no text or symbols)

Line drawing of hands using a tool to adjust or install a device component (no text or symbols visible)

Technical line drawing of a device housing with internal components and an arrow indicating direction (no text or symbols)

Technical line drawing of a robotic vacuum cleaner with mounting bracket and control panel (no text or symbols)

Diagram showing two circular icons with Chinese text '不安全' (no security) and a distance marker '40' between them, surrounded by rectangular blocks.

✓A ✓B C D

QR code image containing encoded data, no visible human-readable text

Line drawing of a robotic vacuum cleaner with a circular head and attached components, showing internal structure and motion direction (no text or symbols)

Line drawing of a hand inserting a device into a computer tower (no text or symbols)

Top-down schematic of a circular device with internal components and a hand pointing to a component (no text or symbols)

Technical line drawing of a vehicle front panel showing internal components and assembly (no text or symbols)

Line drawing of a mechanical component or device with no visible text, numbers, or symbols

Technical line drawing of a mechanical device with a container containing small components (no text or symbols)

Line drawing showing a faucet spraying water into a water-filled container (no text or symbols)

Technical line drawing of a car interior with internal compartments and ventilation slots (no text or symbols)

Technical line drawing of a circular device with internal components and hands operating (no text or symbols)

Technical line drawing of a mechanical assembly with a hand operating a tool (no text or symbols present)

Line drawing of a hand holding a tool, no text or symbols present

Fig. 30 - Limpieza del cepillo lateral

Technical diagram of a circular device with internal components and a hand operating the base (no text or symbols visible)

Technical line drawing of a robotic vacuum cleaner with hands adjusting the component (no text or symbols)

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Technical diagram of a device interior with numbered components and labeled parts

Diagram of a remote control interface with labeled buttons including power, home, wireless, audio, and sound controls.

Fig. 3 - Telecomando

AUTO

Line drawing of a multi-level electronic device with front panel and side ports (no text or symbols)

Simple 3D illustration of a rectangular block with vertical lines on its top face (no text or symbols)

16

□

Technical line drawing of a mechanical component with mounting holes and a curved base (no text or symbols)

19

20
Fig. 4 - Accessori

Technical line drawing of a circular mechanical component with internal components and directional arrows (no text or symbols)

Technical diagram of a mechanical assembly with cross-section and top view, showing internal components and tool path (no text or labels)

0.5m 1.5m 0.5m

Line drawing of a robotic vacuum cleaner with a rectangular unit and circular base (no text or symbols)

Line drawing of a robotic vacuum cleaner with a circular housing and mounting base, showing internal components and a downward arrow indicating motion (no text or symbols present)

Line drawing of a hand using a tool to adjust or install a device into a device casing (no text or symbols present)

Technical line drawing of a device housing with internal components and an arrow indicating direction (no text or symbols)

Technical line drawing of a robotic vacuum cleaner with mounting bracket and control panel (no text or symbols)

Diagram showing two circular icons with 'No' and 'Yes' symbols, connected by a line labeled '40°' indicating distance or angle.

✓A ✓B C D

QR code image containing encoded data, no visible human-readable text

Line drawing of a robotic vacuum cleaner with a circular housing and attached components, showing internal structure and motion direction (no text or symbols)

Line drawing of a hand inserting a device into a computer tower (no text or symbols)

Technical line drawing of a circular device interior with internal components and a hand pointing to a component (no text or symbols)

Technical line drawing of a vehicle front panel showing internal components and assembly (no text or symbols)

Line drawing of a mechanical component with a central pin and mounting bracket (no text or symbols)

Technical line drawing of a mechanical device with a container containing small components (no text or symbols)

Line drawing of a faucet spraying water onto an open water dispenser (no text or symbols)

Technical line drawing of a car interior with open door, ventilation slots, and plastic tray (no text or symbols)

Technical line drawing of a circular device with internal components and hands operating (no text or symbols)

Technical line drawing of a mechanical assembly with a hand operating a tool (no text or symbols present)

Line drawing of a hand holding a tool, no text or symbols present

Technical diagram of a circular device with internal components and a hand operating the base (no text or symbols visible)

Technical line drawing of a robotic vacuum cleaner with hands adjusting the component (no text or symbols present)

1–7: plastiche/20–22: carta e cartone/80–98: materiali compositi

(Solo per la Francia)

1. About this user manual .... 144
   1.1. Explanation of symbols ......144 FR
2. Proper use 145
3. Safety instructions ....145
   3.1. Information on the battery pack ....148
4. Package contents ...... E\$49
5. Appliance overview 150
6. Preparing the robot vacuum and mop 153
   6.1. Setting up the dust collector/charging station 154
   6.2. Charging the battery pack 154
7. Inserting batteries in the remote control ....155
8. Vacuum cleaning mode 156
9. Mopping mode ....156
   9.1. Preparing the water tank 157
10. Creating cleaning plans ....158
11. App control ....159
    11.1. System requirements....159
    11.2. Connecting the appliance to the app 159
12. Cleaning and care.... 160
    12.1. Cleaning and replacement intervals ....160
    12.2. Cleaning surfaces....160
    12.3. Replacing the dust container in the dust collector/charging station.....161
    12.4. Cleaning the dust container/water tank....161
    12.5. Cleaning the dust filter....162
    12.6. Cleaning the suction opening and brush.... 162
    12.7. Cleaning the side brushes....163
    12.8. Cleaning wheels/drive wheels....163
13. Longer periods without use 164
14. Troubleshooting 164
15. Spare parts ....165
16. Technical specifications....166
17. EU declaration of conformity ....167
18. Trademark information....167
19. Disposal....167
20. Service information....168
21. Legal Notice....168

1. About this user manual

Thank you for choosing our product. We hope you enjoy using this appliance.

Read the safety instructions carefully before using the appliance for the first time. Note the warnings on the appliance and in the user manual.

Always keep the user manual close to hand. If you sell the appliance or give it away, please ensure that you also pass on this user manual. It is an essential component of the product.

1.1. Explanation of symbols

If a passage is marked with one of the warning symbols listed below, follow the warning notices in order to prevent the hazards described in the text and the potential consequences described there.

DANGER!

Warning: risk of fatal injury!

WARNING!

Warning: risk of possible fatal injury and/or serious irreversible injuries!

WARNING!

Warning: risk of electric shock!

WARNING!

Warning: risk of explosive materials!

CAUTION!

Warning: risk of minor and/or moderate injuries!

NOTICE!

Follow these instructions to prevent damage to the appliance!

More detailed information about using the appliance!

NOTICE!

Follow the instructions in the user manual!

Symbol for protection class II

Direct current symbol

Alternating current symbol

Fuse

Appliances bearing this symbol have a fuse that burns out when the specified rated current (T2.0A) is exceeded, thus breaking the electrical circuit.

Indoor use

2. Proper use

The robot vacuum and mop is used for automatic dry and damp cleaning of smooth and even floors indoors.

Do not use the appliance outdoors. This appliance is designed for use in private households and similar household applications, such as

• in kitchens for staff in retail outlets, offices and other commercial areas
• on agricultural estates
- by customers in hotels, motels and other accommodation facilities
- in bed-and-breakfast establishments.

The appliance is not intended for commercial or industrial use.

Please note that we shall not be liable in cases of improper use:

▶ Do not modify the appliance without our consent and do not use any auxiliary equipment that we have not approved or supplied.
▶ Only use replacement parts or accessories that we have supplied or approved.
Comply with all the information in this user manual, especially the safety instructions. Any other use is considered improper and can cause personal injury or property damage.

3. Safety instructions

DE

■ Keep the appliance and its FR accessories out of the reach of children. NL
■ This appliance can be used by children of 8 years and older, and by people with reduced physical, sensory or mental capacity, or with a lack of experience and/or knowledge, but only with proper supervision, or if they have been told how to use the appliance safely, and have understood the risks involved if they use it improperly.
■ Children must not be allowed to play with the appliance.
■ Do not allow children to clean the appliance or perform maintenance tasks on it unless they are aged 8 years or older, and properly supervised.
■ Children younger than 8 should be kept away from the appliance and mains cable.
FR
NL
IT
EN

DANGER!

Risk of electric shock!

Live parts. There is a risk of electric shock/short circuit.

■ Use the charging station to charge the battery.

■ The charging station must only be used in dry rooms.

■ Only connect the mains cable to a properly installed, easily accessible socket. The local mains voltage must match the voltage stated in the technical specifications for the appliance.

■ The power socket must be easily accessible so that you can unplug the appliance from the mains quickly if necessary.

■ When unplugging the mains cable from the socket, always pull on the plug rather than on the mains cable. Do not kink or crush the mains cable.

■ Unplug the appliance from the power socket:

– before cleaning or maintaining the appliance

- in the event of damage to the plug, mains cable, charging station or the appliance itself

- if liquids or foreign objects have penetrated inside the appliance

– before fitting or removing accessories

– the appliance is damp or wet

- if you are away for a long period

– during thunderstorms.

■ Only use the appliance in enclosed spaces and never expose the appliance to water droplets or spray.

■ Do not touch the appliance with damp or wet hands while the appliance is charging.

■ Check the robot vacuum and mop and the mains cable for damage before using the appliance for the first time and after every use.

■ Do not use the appliance if the robot vacuum and mop, charging station or mains cable is visibly damaged.
■ Contact our Service Centre without delay if the appliance has been damaged during transport.
■ Never immerse the robot vacuum and mop, charging station or mains adapter in water or other liquids!

WARNING! Risk of explosion!

There is a risk of fire or explosion when vacuuming up flammable liquids or certain solid materials.

■ Never use the appliance near highly flammable materials.
■ Do not vacuum up sharp-edged or highly flammable objects and liquids such as matches, hot ashes or petrol.
■ Do not vacuum up toner dust (carbon black from laser printers, photocopiers) under any circumstances.

CAUTION!

Risk of injury/risk of damage to the appliance!

There is a risk of injury and/or damage to the appliance due to improper use.

DE

FR

NL

ES

IT

■ Only use the appliance to vacuum small amounts of dust, dirt and crumbs. Empty the dust container after every use.

EN

■ Do not use the appliance to vacuum up liquids or damp dirt. Allow damp, cleaned carpets to dry fully before vacuuming.
In order to avoid the risk of tripping, do not use an extension cable and inform any persons present about the operation of the robot vacuum and mop.
■ Do not cover the sensors and ventilation slots on the robot vacuum and mop.

■ Avoid collisions with rough, brushed or grainy surfaces (e.g. skirting boards on fireplaces or stoves), as the surfaces themselves or those on the appliance can be damaged. Exclude such areas from vacuuming.

3.1. Information on the battery pack

The appliance contains a lithium-ion battery pack that cannot be removed.

DANGER!

Risk of explosion!

Batteries could explode if exposed to extreme heat.

Extreme temperatures also impair the battery's charging capacity.

■ Never throw the appliance into a fire.
■ Do not expose the appliance to extreme conditions.

Avoid:

– high humidity or wet conditions
- extremely high (> 40 °C) or low temperatures (< 0 °C)
- direct sunlight
- naked flames.

■ Do not use the charging station in a highly reflective environment, e.g. in direct sunlight or near mirrors.

NOTICE!

Possible damage to battery!

Improper handling of the battery can completely destroy it.

■ Avoid heavy impacts and vibrations.
■ Charge the battery regularly and as fully as possible. Do not leave the battery discharged for a long period of time.
■ If the battery no longer charges or only charges partially, contact our Service Centre.
■ Do not use damaged chargers.
■ Dispose of the appliance with battery in an environmentally friendly manner (see "19. Disposal").

■ Only use the supplied charging station to charge the rechargeable battery.
■ Users cannot simply replace the battery pack themselves. In this case, the rechargeable battery must be replaced by a qualified service technician.

The laser distance measurement complies with the IEC 60825-1:2014 Class 1 and does not generate any hazardous laser radiation.

4. Package contents

DANGER!

Risk of choking and suffocation!

There is a risk of choking and suffocation due to swallowing or inhaling small parts or plastic wrap.

- Keep the plastic packaging out of the reach of children.

Check whether all the items in the delivery are present. Contact us within 14 days after purchase if any items are missing.

The following items are supplied with your product:

• Robot vacuum and mop with built-in lithium-ion battery pack
• 1 x dust collector
• 1 x water tank
• 2 x mop attachments (1 x replacement mop attachment)
• 2 x HEPA H13 filters (1 x replacement filter)
• 1 x main brush
• 3 x dust bags
• 2 x side brushes (1 x replacement side brushes)
• 1 x remote control, incl. 2 x AAA batteries
• 1 x cleaning brush
• 1 x short manual

5. Appliance overview

Labeled diagram of a robotic vacuum cleaner with numbered parts for identification

Fig. 1 – Front with open storage compartment

1. button: Return to/recharge at the charging station; long press: reset the WLAN connection
2. ▶ button: start/pause cleaning; long press: switch the appliance on/off
3. Bumper
4. Reset button
5. Water tank/dust container
6. Appliance lid
7. Laser sensor

Technical diagram of a device interior with numbered components, likely for assembly or maintenance instructions.

Fig. 2 - Bottom

1. Wheel: to aid the direction of movement
2. Charging contacts
3. Side brush

4. Rotating brush

5. Wheel for driving

6. 2-in-1 dust container
7. Anti-fall sensors

AUTO A × ×

Fig. 3 - Remote control

Switch the appliance on/off Return to/recharge at the charging station AUTO Automatic function Select the spot cleaning programme Initiate pairing mode Start/pause Mute voice output Set mopping moisture level (normal, high) Set suction power (normal, high) Control buttons

Line drawing of a multi-level electronic device with front panel and control panel (no text or symbols)

Simple 3D illustration of a rectangular block with vertical striped pattern (no text or symbols)

16

□

19
20

21
Fig. 4 - Accessories

1. Dust collector/charging station
2. HEPA replacement filter
3. Cleaning brush with blade
4. Replacement side brushes
5. Mop attachment
6. Wiping cloth
7. Dust bag

22 23 24 25 26

Fig. 5 - Dust container

1. Dust filter
2. Sponge filter
3. HEPA filter
4. Dust flap
5. Charging contacts

27 28

Fig. 6 - Water tank

1. Filling opening
2. Water tank

21 29 33 32 31 30

Fig. 7 - Dust collector/charging station

1. Cover flap
2. Vent
3. Suction opening
4. Charging contacts
5. Operating light

i

The robot vacuum and mop has a voice output. Status and error messages are indicated by voice output. These voice outputs are not mentioned separately in the user manual as they are self-explanatory.

■ Press the button to mute voice output and acoustic signals.

6. Preparing the robot vacuum and mop

Technical line drawing of a circular mechanical component with internal ribs and central hub (no text or symbols)

Fig. 8 - Removing the transport lock

Remove all packaging materials, film, and the transport lock from the appliance.

Technical diagram of a mechanical assembly with cross-section and top view, showing internal components and tool path (no text or labels)

Fig. 9 - Attaching the side brush

▶ Turn the robot vacuum and mop over and place it on a soft surface.
Place the side brush supplied vertically on the drive shaft and press it on until you hear it click into place.

6.1. Sett ing up the dust collector/charging station

0.5m 1.5m 0.5m

Fig. 10 – Setting up the dust collector/charging station

▶ Position the dust collector/charging station on a wall with a level surface and avoid direct sunlight.
▶ Ensure that the required clearance of approx. 0.5 m to the sides and approx. 1.5 m to the front is maintained and that the charging contacts for the robot vacuum and mop are freely accessible.
▶ Insert the mains plug into the mains socket.

6.2. Charging the battery pack

Line drawing of a robotic vacuum cleaner with a rectangular unit and circular base (no text or symbols)

Fig. 11 – Charging battery pack The robot vacuum and mop is fitted with a lithium-ion battery pack. Fully charge the appliance's battery pack for approx. 5–6 hours.

▶ Press the || button on the appliance for

approx. 5 seconds or the button on the remote control to switch on the robot vacuum and mop.

▶ Place the robot vacuum and mop on the charging station so that the charging contacts are on top of each other.

The charging indicator flashes during the charging process and lights up continuously when the charging process is complete.

The robot vacuum and mop automatically returns to the dust collector/charging station when the battery is low.

You can use the button or the app to instruct the robot vacuum and mop to automatically return to the dust collector/charging station and charge.

This return to the dust collector/charging station interrupts the cleaning process.

If battery performance decreases significantly even when charged, contact our Service Centre.

7. Inserting batt eries in the remote control

WARNING!

Risk of injury!

There is a risk to health due to leaking battery acid.

■ Avoid contact with battery acid. If battery acid comes into contact with skin, eyes or mucous membranes, rinse the affected areas with plenty of clean water and consult a doctor as soon as possible.
- Keep new and used batteries out of the reach of children.
■ Stop using the remote control if you cannot close the battery compartment securely, and keep it well away from children.

WARNING!

Risk of explosion!

■ There is a risk of explosion if batteries are replaced incorrectly!
■ Only replace batteries with those of the same or an equivalent type.
■ Never try to recharge non-rechargeable batteries. Risk of explosion!
■ Store batteries in a cool, dry place. Strong direct heat can damage batteries. Do not expose the appliance to sources of intense heat.
■ Never short-circuit batteries.
■ Never throw batteries into a fire.
■ Remove leaking batteries from the appliance immediately. Clean the contacts before inserting new batteries. Battery acid can cause chemical burns!
■ Always remove flat batteries from the appliance.
■ If the appliance is not going to be used for long periods, remove the batteries.

■ Before inserting the batteries, check that the contacts in the appliance and on the batteries are clean and, if necessary, clean them.
■ Always use new batteries of the same type. Never use old and new batteries together.
■ Pay attention to the polarity (+/-) when inserting the batteries.

Two micro batteries, type AAA LR03 1.5 V, are inserted in the remote control.

Replace the batteries if the appliance fails to react to commands from the remote control properly. Then follow these steps:

LRO3/AAA Micro LR03/AAA Micro

Fig. 12 - Battery compartment

▶ Slide the battery compartment flap open by applying a little pressure to the ribbing.
Remove the two batteries from the battery compartment.
▶ Dispose of the old batteries in accordance with legal requirements.
▶ Insert two new micro batteries, type AAA LR03 1.5 V, into the battery compartment.
▶ Slide the flap fully back into the remote control.

8. Vacuum cleaning mode

NOTICE!

Risk of damage to property!

Loose cabling can get caught around your robot vacuum and mop during vacuum cleaning and be pulled along by the appliance. This can result in devices being pulled off a table and consequently damaged.

■ Lay cables out of the reach of the appliance.
■ Remove all fragile items (e.g. glass, lamps, vases) and objects that could become trapped in the brushes or sucked up (e.g. cords, clothing, newspapers, curtains) from the working area before operating the appliance.

Remove the robot's brushes before using it on carpets. This robot vacuum and mop is not suitable for use on deep-pile carpets.

▶ Make sure that the dust container is clean and empty and that the filter is inserted correctly.
Place the robot vacuum and mop in an open space in the room.
▶ Press the button on the appliance for approx. 5 seconds or the ⏻ button on the remote control to switch on the robot vacuum and mop.
▶ Press the || button to start the cleaning process.
▶ Press the or button on the remote control to set the suction power (normal, high).

▶ Press the button again to pause the cleaning process.
▶ Press the || button again to continue cleaning.
▶ Press the button for approx. 5 seconds or the ⏻ button on the remote control to switch off the robot vacuum and mop completely.
▶ With the appliance switched off, clean the suction opening at regular intervals and empty the dust container after every use.

9. Mopping mode

NOTICE!

Possible material damage!

Floor coverings may be damaged by leaking water/liquids.

■ Only use the robot vacuum and mop in mopping mode on tiles and sealed floor surfaces, not on carpets.

NOTICE!

Possibility of damage to the appliance!

Unsuitable additives in the water can cause damage to the appliance.

- You can add a commercially available, non-foaming floor cleaning agent to the water. Follow the detergent manufacturer's dosing instructions.

9.1. Preparing the water tank

The appliance can be converted into a robot mop using the accessories supplied.

Line drawing of a robotic vacuum cleaner with a circular housing and mounting bracket, showing internal components and a directional arrow (no text or symbols)

Fig. 13 - Removing the dust container/water tank

Remove the dust container/water tank.

Line drawing of hands using a tool to adjust or install a device component (no text or symbols visible)

Fig. 14 – Fill the water tank.

▶ Open the cap on the water tank.
▶ Fill the water tank with clean water.
▶ Close the cap on the water tank.
▶ Moisten the wiping cloth with water and wring it out until it stops dripping.

Technical line drawing of a device housing with internal components and an arrow indicating direction (no text or symbols)

Fig. 15 - Assembling the mop attachment

▶ Slide the wiping cloth into the guide rail of the mop attachment.

▶ Firmly press the wiping cloth onto the mounting pads on the bottom of the water tank.

Line drawing of a robotic vacuum cleaner with a circular housing and mounting bracket (no text or symbols)

Fig. 16 - Inserting the dust container/water tank

Place the dust container/water tank back in the robot vacuum and mop and close the dust container cover.
▶ Press the || button to start wet cleaning.
Press the or button to set the mopping moisture level (normal, high).
▶ To remove the mop attachment after cleaning, first remove the dust container/water tank and then pull off the mop attachment. To do this, press the two release buttons on the front of the mop attachment.
▶ Empty the water tank and rinse the wiping cloth after every wet cleaning and allow it to dry.

10. Creatingcleaning plans

graph TD
    A["Panel A"] --> DashedLine
    B["Panel B"] --> DashedLine
    C["Panel C"] --> DashedLine
    DashedLine --> E["Horizontal Line"]
    style A fill:#f9f,stroke:#333
    style B fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333

Fig. 17 - Standard cleaning

Press the ▶ button to start cleaning. The robot vacuum and mop dynamically plans the cleaning path according to the map created during the exploratory trip (set via the app) and cleans the various zones one after the other. In each zone, the robot vacuum cleaner and mop starts by cleaning the corners and then zigzags through the rest of the cleaning process "Fig. 17 – Standard cleaning".

For spot cleaning, press the 📋 button on the remote control.
To return the robot vacuum and mop to the charging station after cleaning, press the AUTO button on the remote control.

The app provides additional setting options, e.g:

• Exploratory trip through the premises
- Set up restricted areas/an invisible wall
- Set up restricted areas for damp mopping

Diagram showing two circular symbols with checkmarks and a distance marker labeled '400' between them, likely indicating accessibility or restriction zones.

Fig. 18 – Setting up restricted areas

• Set up restricted areas for vacuuming
• Set up rooms to be cleaned

✓A ✓B C D

Fig. 19 - Defining rooms

11. App control

To make use of the full functionality of your robot vacuum and mop, please download the medion Life+ app free of charge to your smartphone.

Simply scan the following QR code or visit the Play Store (Android™) or App Store (iOS®) and search for medion Life+ app.

medion LIFE+

QR code image containing encoded data, no visible human-readable text

A customer account is required to use the app. For this, you need a valid email address. Follow the instructions in the app.

11.1. System requirements

• Smartphone with WLAN 802.11 b/g/n/a/ac or higher
  • 2.4 GHz/5 GHz WLAN network
• Android™ 9 or higher
• iOS 14 or higher
  • Install the medion Life+ app on your smartphone

11.2. Connecting the appliance to the app

▶ Open the medion Life+ app.

If the Bluetooth® function on your smartphone is switched on, the app automatically finds the appliance during the initial setup and is displayed. Without Bluetooth, select the appliance as described below.

The installation process may vary for different operating systems.

▶ If you have not yet registered an appliance in the median Life+ app, tap the Add device button.
If you have already connected an appliance in the app, click + in the top right corner.
▶ Select the X41 SW+ (MD14841) model in the Vacuum robots category.
Now follow the instructions in the app to connect.

Further information and support for installing the medion Life+ app and instructions for optional troubleshooting can be found at: https://www.medion.com/gb/service/.

12. Cleaning and care

WARNING!

Risk of electric shock!

There is a risk of electric shock/short circuit from live parts.

■ Never immerse the robot vacuum and mop, charging station or mains adapter in water or other liquids!
■ Only clean the appliance and all accessories with a dry or slightly damp cloth.
■ Switch off the appliance completely and pull the mains plug out of the socket before cleaning and maintenance as well as before assembly or disassembly of the accessories.

12.1. Cleaning and replacement intervals

Part	Cleaning interval	Replacement interval
Dust container	After each cleaning
Dust bag After	notification that the dust bag is full
Filter Once a	week	Every 2 months
Brush roller Once a week		Every 6–12 months
Cleaning brushes	Once a month	Every 3–6 months or when the brushes are used up

Part	Cleaning interval	Replacement interval
Brush frame	Once a month	Every 3–6 months or when the silicone lip is used up
Sensors Once	a month
Charging contacts	Once a month
Wheel Once	a month
Mop attachment	After each cleaning
Wiping cloth	After each cleaning
Water tank	After each cleaning

12.2. Cleaning surfaces

Line drawing of a robotic vacuum cleaner with a circular housing and mounting bracket (no text or symbols)

Fig. 20 - Removing the dust container/water tank

▶ Switch off the robot vacuum and mop.
Remove the dust container/water tank.
Do not use any solvents or caustic/gaseous cleaning agents to clean the appliance's surfaces.
▶ Wipe the surface of the robot vacuum and mop and the charging station with a damp cloth.

Line drawing of a hand inserting a device into a computer tower (no text or symbols)

Fig. 21 - Cleaning charging contacts

Clean the charging contacts with a clean, dry cloth.

Technical line drawing of a circular device interior with internal components and a hand pointing to a component (no text or symbols)

Fig. 22 - Cleaning drop sensors

▶ Clean the sensor surfaces with a clean, dry cloth.

12.3. Replacing the dust container in the dust collector/charging station

Technical line drawing of a vehicle front panel showing internal components and assembly (no text or symbols)

Fig. 23 - Replacing the dust bag

▶ Pull the mains plug out of the socket.

▶ Open the cover flap.
▶ Pull the dust bag out upwards by the tab.
▶ Dispose of the filled dust bag in a suitable dustbin.
Insert a new dust bag into the holder in the chamber as shown (see Fig. 23).
▶ Check that the dust bag is correctly seated in the lifting device.
▶ Close the cover flap.
▶ Reconnect the mains cable to the socket.

The dust collector/charging station is ready for operation again.

12.4. Cleaning the dust container/water tank

Empty and clean the dust container/water tank after each use.

Remove the dust filter before cleaning with water.

Technical line drawing of a mechanical component or housing with no visible text or symbols

Fig. 24 - Emptying the water tank

▶ Empty the water tank over a sink.

Technical line drawing of a mechanical device with a base component (no text or symbols)

Fig. 25 – Emptying the dust container

▶ Empty the dust container over a dustbin. Gently knock out the dust.

Line drawing of a faucet spraying water into a small appliance (no text or symbols)

Fig. 26 - Cleaning the dust container

- Rinse the dust container with water as required.

▶ Never put the dust container in the dishwasher!
▶ Allow the dust container to dry completely.
Put the dust container back into the appliance.

12.5. Cleaning the dust fi Iter

Technical line drawing of a car interior with internal compartments and ventilation slots (no text or symbols)

Fig. 27 - Removing the dust filter

▶ Remove the dust filter.
Remove the HEPA filter and the foam filter.
▶ Carefully tap out the filters.

▶ Do not clean the filters in a dishwasher.
The HEPA filter is not suitable for cleaning with water.
▶ Do not expose the filters to direct sunlight.

• Rinse the filter components, except the HEPA filter, under running water as required and leave them to dry completely for approx. 24 hours.
  ▶ Reinsert the filters in the correct order.

12.6. Cleaning the suction opening and brush

Dirt and dust can accumulate around the suction opening and impair the suction power. To keep the suction power constant, clean the suction opening on the underside regularly. Switch off the appliance and place it on a soft surface.

Technical line drawing of a circular electronic device with internal components and hands operating (no text or symbols)

Fig. 28 - Removing the brush

▶ Press both locking tabs on the brush frame inwards and lift the brush frame off.
Remove the brush from the suction opening.
Remove dirt and dust on and in the suction opening with a damp wiping cloth.

Technical line drawing of a mechanical device with a hand operating the lever (no text or symbols present)

Fig. 29 - Removing hair/threads

▶ If long hairs or threads have become wrapped around the brush, cut them and then brush the brush thoroughly.

Now put the brush back into the opening.

▶ Press the brush frame back onto the suction opening.

12.7. Cleaning the side brushes

Line drawing of a hand holding a tool, no text or symbols present

Fig. 30 - Cleaning the side brush

▶ Switch off the appliance and place it upside down onto a soft surface with the bottom of the appliance facing upwards.

▶ Clean the brushes to remove dirt and hair.

Remove stubborn dirt from the brush using a damp cloth.

Remove the side brush to make it easier to clean.

▶ After cleaning, reattach the brushes (see "Fig. 9 – Attaching the side brush").

i

Replace the brushes at intervals of 3-6 months depending on the degree of wear to ensure good cleaning performance. For accessories, please contact the Service.

Centre.

i

If the bristles become bent, place the brushes in hot water so that the bristles return to their original shape.

12.8. Cleaning wheels/drive wheels

Technical diagram of a circular device with internal components and a hand operating the interior (no text or symbols visible)

Fig. 31 - Removing the wheel

- Lift the front wheel upwards and release it from the mounting. - Clean it to remove dirt with a damp cloth. - After cleaning, reattach the wheel to its original position while applying slight pressure.

Technical line drawing of a robotic vacuum cleaner with hands adjusting components (no text or symbols)

Fig. 32 - Cleaning the drive wheels

▶ Wipe the drive wheels with a damp cloth.

13. Longer periods without use

▶ Switch off the appliance. Press the button for approx. 3 seconds or the ⏻ button on the remote control to switch off the robot vacuum and mop completely.
If the robot is not in operation for a longer period of time, fully charge the battery, pull out the mains plug, clean the appliance and store it in a dry place protected from direct sunlight.

14. Troubleshooting

If the appliance malfunctions, the operating light flashes red and a corresponding announcement sounds. First, check whether you can remedy the problem yourself using the following overview.

Never attempt to repair the appliance yourself. If a repair is necessary, contact our MEDION Service Centre or a suitable authorised repair workshop.

Problem/cause	Solution
Front sensor obstructed	▸ Remove any dirt or obstructions.
Fault on one of the wheels	▸ Check the left, right and front drive wheel.▸ Remove any dirt or obstructions.
Side brush fault	▸ Remove any dirt or obstructions.
Brush jammed	▸ Remove any dirt or obstructions.
Position error	▸ Place the robot vacuum and mop on a level surface.
Robot obstructed	▸ Remove any obstacles.
Low battery level	▸ Charge the robot vacuum and mop on its charging station.

Problem/cause	Solution
Error due to external interference	▸ Remove the possible interference.▸ Change the position of the robot.
Direction sensor obstructed	▸ Check the lateral direction sensors.▸ Clean the direction sensors.
Robot tilted ▶	Place the appliance on a level surface with no obstructions and restart the robot.
Dust container or filter not installed correctly	▸ Check that the filters and dust container are correctly seated.▸ Insert the dust container and the filters.
Not enough water in the water tank	▸ Fill the tank with water.▸ If the error persists, contact the service centre.
The laser sensor is obstructed/dirty and is supplying incorrect positioning data to the robot.	▸ Reposition the robot.▸ Check the laser sensor for dirt.▸ Clean the sensor.
Battery error ▶	The battery temperature is too high or too low. Allow the appliance to cool down and only use the robot once the temperature of the batteries has normalised.
Fault on the drive wheels	▸ Check the drive wheels for possible obstructions.▸ If the error persists, contact the service centre.
Fault on the side brush	▸ Check the side brush for possible obstructions.▸ If the error persists, contact the service centre.
Error message on the cleaning brush	▸ Check the cleaning brush for possible obstructions.▸ If the error persists, contact the service centre.
Error message on the water pump	▸ Clean the water tank▸ Clean the hose connection to the water tank.▸ Drain the remaining water from the tank.▸ If the error persists, contact the service centre.
Sensor error ▶	Clean the sensor.▸ If the error persists, contact the service centre.
Unusual noises Obstruction possible due to foreign objects on brush, side brushes or main wheel.	▸ Clean the affected parts.

Problem/cause	Solution
Declining cleaning performance• Dust container full• Filter blocked• Brush dirty	▸ Clean the dust container, filter and brush.
Insufficient power during cleaning.Cleaning will not continue after the robot has returned to recharge.	▸ Check whether the robot is in DND mode (do not disturb).The robot does not continue cleaning in DND mode.▸ The robot will not continue cleaning if it is manually returned to the charging station.
WLAN connection has not been established:• The WLAN function is not activated.• The WLAN signal is insufficient/disrupted.	▸ Reset the WLAN connection and try again.▸ Make sure that the robot is in a location with a good WLAN signal.▸ Reset the WLAN settings, download the latest version of the mobile app and try to connect to the WLAN network again.

15. Spare parts

Please visit our MEDIONserviceshop at https://www.medion.com/ medionserviceshop to order any spare parts you need.

You will be able to find out all the details about your specific product while you're there.

1. Technical specifi cations

Appliance
Noise level:	Low noise mode: 60 db (+/-5%) Standard mode: 62 dB (+/-5%) Strong mode: 65 dB (+/-5%) Super strong mode: 72 dB (+/-5%)
Dust container capacity: 0.3 l
Water tank capacity: 0.3 l
Operating duration according to vacuum level:	Approx. 240 min.
Weight: Approx. 3.24 kg
Dimensions: Approx. 35.0 x 9.8 cm
Battery pack/battery
Lithium-ion battery block Model:	B121-4S2P
Manufacturer: BYD, China
Battery voltage: 14.4 V
Battery capacity: 5000 mAh
Output: 72 Wh
Charging time: <6 hours
Operating temperature: 0 °C to 40 °C
Dust collector/charging station
Input: 200–240 V , 50/60 Hz	~
Rated power	680 W
Output: 19 V	--- 1.2 A
Max. motor suction:	17 kPa (+/- 10%)
Noise level:	Max. 75 dB (+/- 5%)
Weight:	Approx. 2.1 kg
Dust bag capacity:	2 l
Dimensions: Approx. 21.5 x 18.1 x 26.9 cm
Remote control
Batteries	2 x 1.5 V (AAA/LR03)

17. EU declaration of conformity

CE MEDION AG hereby declares that the radio equipment type MD 14841 complies with the directive 2014/53/EU and the directive

2011/65/EU. The complete EU declaration of conformity is available at: www.medion.com/conformity.

18. Trademark information

The Android™ word mark and logos are registered trademarks of Google LLC and are used by MEDION under licence.

Other trademarks are the property of their respective owners.

19. Disposal

PACKAGING

Your appliance has been packaged to protect it from damage in transit. The packaging is made of materials that can be recycled in an environmentally friendly manner.

Observe the following labels on the packaging materials regarding waste separation with the abbreviations (a) and numbers (b): 1–7: plastics/20–22: paper and cardboard/80–98: composite materials

(France only)

The “Triman” symbol tells the consumer that the product can be recycled, is covered by an extended system of manufacturer’s responsibility and must be sorted by material type in France.

APPLIANCE

All old appliances marked with the symbol shown must not be disposed of in normal household waste.

In accordance with Directive 2012/19/EU, the appliance must be properly disposed of at the end of its service life.

This involves separating the materials in the appliance for the purpose of recycling as well as minimising the environmental impact and negative effects on human health.

Take old appliances to an electrical scrap collection point or a recycling centre.

Contact your local waste disposal company or your local authority for more information on this subject.

BATTERIES

Do not dispose of used batteries with normal household rubbish. Batteries must be disposed of correctly. For this purpose, retailers that sell batteries and local collection points provide containers in which you can dispose of them. Contact your local waste disposal company or your local authority for more information.

In connection with the sale of batteries or the supply of appliances containing batteries, we are obliged to draw your attention to the following:

As the end user, you are legally required to return used batteries. The crossed-out wheelie bin symbol means that the battery must not be disposed of with household rubbish.

20. Service information

Please contact our Customer Service team if your device ever stops working the way you want or expect it to. There are several ways for you to contact us:

• In our Service-Community, you can meet other users, as well as our staff, and you can exchange your experiences and pass on your knowledge there.
  You will find our Service-Community at community.medion.com.
  • Alternatively, use our contact form at www.medion.com/contact.
• You can also contact our Service team via our hotline or by post.

Opening times	Hotline number UK
Mon – Fri: 08.00 – 20.00Sat – Sun: 10.00 – 16.00	0333 3213106
Service address
MEDION Electronics Ltd.120 Faraday Park, Faraday Road,DorcanSwindon SN3 5JF, WiltshireUnited Kingdom

You can download this and many other sets of operating instructions from our service portal at www.medionservice.com.

We have stopped providing printed copies of our warranty terms and conditions as part of our commitment to sustainability, but you can access the warranty terms and conditions on our service portal.

You can also scan the QR code on the side of the screen, to download the operating instructions onto your mobile device from the service portal.

21. Legal Notice

Copyright 2024

Date: 03. June 2024

All rights reserved.

These operating instructions are protected by copyright.

Mechanical, electronic and any other forms of reproduction are prohibited without the written permission of the manufacturer.

Copyright is owned by the company:

MEDION AG

Am Zehnthof 77

45307 Essen

Germany

Please note that you cannot use the address above for returns. Please always contact our Customer Service team first.

DE

FR

NL

ES

IT

EN