AT801 - Smartwatch Prixton - Free user manual and instructions

Brand	Prixton
Model	AT801
Category	Smart bracelet (Smartwatch)
Product type	Fitness and health bracelet
Battery	Lithium polymer, rechargeable via USB
Battery life	About 5 to 7 days depending on usage
Connectivity	Bluetooth 4.0
Sensors	Low power accelerometer
Main functions	Pedometer, distance, calories, heart rate, blood pressure, SpO2, sleep, multisport, alarms, find bracelet, remote photo, activity reminders, raise to wake, do not disturb mode
Synchronization	FitPro app (iOS 9.0+ / Android 5.0+)
Operating temperature	-10°C to 50°C
Display	Touch screen
Vibration motor	Yes
Settings	Alarms (up to 8), do not disturb mode, reset, delete device
Compatibility	Android 5.0+ and iOS 9.0+
Charging	Plug the device removed from the bracelet into a USB charger or computer port
Content of the manual	24 pages, free to download

Frequently Asked Questions - AT801 Prixton

How to connect the Prixton AT801 watch to the phone?

Scan the provided QR code to download the FitPro app. Open the app, click on 'start search', then select your bracelet. The first connection requires calibration. Make sure Bluetooth 4.0 is enabled.

How to charge the smartwatch battery?

Remove the device from the bracelet. Plug the USB connector into a wall charger or computer USB port. The battery will recharge automatically and the screen will light up. The first charge should be performed if the device is off.

How to reset the AT801 watch to factory settings?

In the FitPro app, go to settings and enable the 'Factory settings of the device' function. This will delete all data on the bracelet (step counter, etc.). You can also hold the power button to turn off, then briefly press to exit.

Does the sleep tracking work automatically?

Yes, the bracelet automatically switches to sleep monitoring mode when you fall asleep. Detection starts at 10 PM. Data is synced with the app approximately every 3 to 4 hours.

How to measure heart rate and blood pressure?

The bracelet has a 'three-in-one' function to measure heart rate, blood pressure, and blood oxygen level. Wear the bracelet correctly, the sensor must be close to the skin without movement.

What permissions are needed for the FitPro app on Android?

For background operation, you must allow the app to run in the background, grant access to contacts, and add it to the permissions manager. Unlock all permissions to avoid disconnections.

How to set an alarm on the watch?

Connect the bracelet to the FitPro app. In settings, you can set up to 8 alarms. Once synced, the alarms work even if the app is not connected.

Can you take remote photos with the watch?

Yes, once connected, you can take a remote photo from the bracelet or the FitPro app. Use the 'Remote photography' function in settings.

How to activate raise to wake?

In the FitPro app settings, enable the 'Illuminate on wrist raise' option. This will turn on the screen automatically when you turn your wrist.

What is the recommended operating temperature?

The bracelet operates correctly in a temperature range of -10°C to 50°C. Avoid prolonged exposure outside this range.

USER MANUAL AT801 Prixton

Diagram showing a device with an orange arrow pointing to a vertical panel and two black-and-white icons below (no text or symbols)

Android

iOS

Requisitos del sistema: Android 5.0 o superior; iOS9.0 o superior; soporte Bluetooth 4.0.

The wristband is best worn after the ulnar styloid Adjust the size of the wrist according to the adjustment hole; Buckle belt buckle. The sensor should be close to the skin to avoid moving

Charge the bracelet

For the first time, make sure that the battery is in normal power. If the power is not turned on normally, please connect the charger to charge the device, and the bracelet will automatically turn on. Take out the device body from the strap. Put th USB with metal side into the charger or to the computer USB interface for charging.

Diagram showing a battery component with an arrow indicating direction, alongside two battery cells (no text or symbols)

Install the bracelet app on your phone

Sean the QR cede or go to the App Store, app download and install the app.

Android

iOS

System Requirements: Android 5.0 or above; iOS9.0 or above; Support for Bluetooth 4.0.

Device connection

For the first time, you need to connect to the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.

• Open the phone app → click to start scanning → click on the device connection
  • After the pairing is successful, the APP will automatically save the Bluetooth address of the bracelet, and when the APP is opened or running in the background, it will automatically search and connect the bracelet;
• Android mobile phone Please ensure that the APP runs in the background and the mobile phone system settings are given all permissions such as running the background and reading the contact information.

Bracelet function description

• When the device is turned off, touch and hold the function button for more than 3 seconds to turn the device on.
• In the Bluetooth address interface of the bracelet, press and hold the 2 second wristswitch to turn off the phone. Short press will exit the shutdown page.
• Bracelet reset device This function will clear all data of the bracelet (such as step counting).
• Under the power on state, touch the short press function key to light up the screen.
• Whether the default clock page of the bracelet, press the short press function key to switch to view different pages, no operation default five-second screen.
• Switch to the heart rate three-in-one interface to start the test, heart rate three-in-one interface 60s timeout automatically off screen (heart rate and blood pressure need bracelet hardware support).

Clock interface

After syncing with the phone, the bracelet will automatically calibrate the time. Press and hold the stand by interface for 2 seconds to switch the dock interface of 24/12 hours.

(tracks Step)

Number of steps

Wear the bracelet and record the number of daily movement steps to view the current real-time steps.

Distance

The distance of motion is estimated based on the number of walking steps.

Calorie

Estimate the calories burned based on the number of walking steps

Heart rate, blood pressure, blood oxygen three-in-one

After entering the heart rate three-in-one test interface for a few seconds, the current heart rate, blood pressure, and blood oxygen test results are displayed. This feature requires a wristband to support heart rate and blood pressure sensors

Multi-sport mode

(Running Mode)

Under this interface, you can record the calories and duration of running.

(Skipping rope mode)

Under this interface, you can record the calories and duration of rope skipping.

(Sit-up mode)

Under this interface, you can record the calories and duration of sit-ups.

(Sleep mode)

When you fall asleep, the bracelet will automatically enter the sleep monitoring mode; Automatically detect your deep sleep/shallow sleep/wake up ali night and calculate your sleep quality; Sleep data is only supported for APP viewing.

Note: Wearing a bracelet to sleep will have sleep data and start to detect sleep at 10 o'clock in the evening. Sleeping 3/4 hours of sleep data will be synchronized to the APP while sleeping.

Information mode

When the bracelet pushes multiple reminder messages, enter this interface to view the last 3 message records.

APP function and settings (Personal information)

Please set your personal information after entering the app.

Settings → Personal Information, you can set gender -age - height - weight

You can also set your daily goal steps to monitor daily completions

(Application push)

Incoming call:

In the connected state, if the call alert function is enabled, when the call comes in, the wristband will vibrate and display the name or number of the caller.(You need to give APP read address book permission).

SMS notification:

In the connected state, if the SMS reminder function is enabled, the bracelet will vibrate when there is a text message.

Other reminders:

In the connected state, if this function is enabled, when there is a message such as WeChat, QQ, Facebook, etc., the bracelet will vibrate to remind and display the content received by the app.(You can also view the last three message records in the ring information menu).(You need to give the APP permission to get system notifications. The wristband can display 20-40 words).

Other functions:

Turn on vibration to set this function, When there is a call, message or other reminder, the bracelet will vibrate. If it is closed, the bracelet will only have a screen reminder without shaking to avoid disturbing.

Tips for Android users:

When using the reminder function, you need to set it to allow "FitPro" to run in the background; it is recommended to add "FitPro" to the rights management and open all permissions.

(Alarm setting)

In the connected state, 8 alarms can be set. After setting, it will be synchronized to the bracelet; offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the bracelet will be reminded according to the set time.

(Looking for a bracelet)

In the connected state, click the "Look for the bracelet" option and the bracelet will vibrate.

(Remate photography)

In the connected state, start the photo from the wristband or the APP to enter the remote camera interface, shake/turn the wrist/touch the bracelet, and automatically take a photo after 3 seconds of counting down. Please allow the APP to access the photo al bum to save the self-portrait photo.

(Sedentary reminder)

Set whether to enable the sedentary reminder function, you can set the reminder interval, if you sit for a long time in the set time, the bracelet will remind.

(Raise your hand to brighten)

Turn this function on. When the wristband is in the state of the screen, lift your wrist and turn the screen to yourself to light up the screen.

(Do not disturb mode)

Turn on the Do Not Disturb mode. You can set the Do not disturb time period. During the set time period, the bracelet stops receiving notification messages to avoid reminding messages.

(Device reset)

Setting this feature reset will erase all data in the bracelet (such as step counting).

(Remove device)

Remove device This feature will erase data and remove device.

Basic parameters

Equipment type	Smart wristband	Type of battery	Lithium polymer
Vibration motor	Support	Method of synchronization	Bluetooth4.0
Operating temperature	-10°C~50°C	Sensor	Acceleration Sensor
System Requirements	iOS9.0 and above/Android 5.0 and above

Precautions

1. Bathing and swimming should not be worn.
2. Please Connect the bracelet when synchronizing data.
3. Use the included charging cable to charge.
4. Do not expose the bracelet to high moisture, high temperatura, or very low temperatures for long periods of time
5. The bracelet appears to crash and restart. Please Check the phone memory information clear and try again, or exit the APP and reopen it.

Component introduction

*Host *Wrist strap *Charging cable *Packing box and instructions

Warranty Policy

This product complies with the warranty law in force in the country of purchase. When you have a problem that you can not solve, you must access the web www.prixton.com and click on the contact option to send us your assistance form.

These technical and electrical specifications are those of typical units and may be changed without prior notice in order to provide improved equipment.

Simplified EU Declaration of Conformity

We, La Trastienda Digital located in Avenida Cervantes 49, módulo 25, Basauri 48970, Bizkaia hereby declare that the following goods, imported and selling at European market:

BRAND	MODEL DESCRIPTION		CATEGORY
PRIXTON	AT801	SMARTBAND	WEARABLES

Are in compliance with the EC Council Directive of 2014/53/EU (EM DIRECTIVE) and harmonized standards and with the board of the 16th of April 2014.

The complete text of the UE Declaration of conformity is available anytime at this website address:

www.prixton.com LA TRASTIENDA DIGITAL

Diagram showing battery components with an arrow indicating direction, alongside two battery icons (no text or symbols)

Android

iOS

Diagram showing a device with an orange arrow pointing to a black panel and a black arrow pointing to a grid (no text or symbols present)

Android

iOS

Requisiti del sistema: Android 5.0 o superiore; iOS9.0 o superiore; supporto Bluetooth 4.0.

Diagram showing a device with an orange arrow pointing to a battery symbol and two black rectangular blocks below (no text or labels)

Android

iOS

Diagram of a device with an arrow pointing to a panel, showing internal components and directional arrows (no text or symbols)

Android

iOS

Requisitos do sistema: Android 5.0 ou superior; iOS9.0 ou superior; suporte Bluetooth 4.0.

Diagram showing a battery connector with an arrow indicating direction, alongside two battery cells (no text or symbols)

Android

iOS