CVS 601 - Speaker TANNOY - Free user manual and instructions
Find the device manual for free CVS 601 TANNOY in PDF.
User questions about CVS 601 TANNOY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Speaker in PDF format for free! Find your manual CVS 601 - TANNOY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CVS 601 by TANNOY.
USER MANUAL CVS 601 TANNOY
3" In-Ceiling Loudspeaker for Installation Applications
CVS 401/CVS 401-BK
4" Coaxial In-Ceiling Loudspeaker for Installation Applications
CVS 601 / CVS 601-BK
6.5" Coaxial In-Ceiling Loudspeaker for Installation Applications
CVS 801 / CVS 801-BK
8" Coaxial In-Ceiling Loudspeaker for Installation Applications
CVS 801S
8" In-Ceiling Subwoofer Loudspeaker for Installation Applications
CVS 801S LZ
8" In-Ceiling Subwoofer Loudspeaker for
Installation Applications - Low Impedance Operation Only
2CVS Series Quis 5n Guide 3

Terminal'smared with this symbol carry electrical current of sufficient magnitude to constitute risk of electronic shock. the only high quality professional speaker cables with ^ 念 TS in tooth, lacking plug-per installed. All other installation or modification should be performed only by qualified personnel.
This symbol, otherwise it appears, shows you to the presence of uncontrolled dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, stries you to important opening and maintenance instructions in the accompanying literature. Please read the manual.
Caution To reduce the risk of electric shock, do not remove the top cover (or the seat section). No user swivelable parts include. Refer servicing to qualified personnel.
Caution To reduce the risk of fire or electric char, do not expose this appliance to salt and moisture. The apparatus shall not be exposed to dropping or splashing inks and no objects filled with liquids such as eggs, shall be placed on the apparatus.
Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electronic check does not perform any sewing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
-
Read these instructions.
-
Keep these instructions
-
Hedall warnings
-
Follow-al functions
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Demonstrate any ventilation openings installed in
accordance with the manufacturer's instructions
-
Demonstrate that the following are equivalent:
-
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wire than the other. A grounding-type plug has two blades and a third grounding plug. The wide blade or the third plug are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being kinked on or pinched particularly at plugs, overcome neocarpities, and the point where they exit from the apparatus. 11. Use only attachments/ accessories specified by the manufacturer.

- On-the-job with the cart stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
-
Unplug the apparatus during lightning storms or when unused for long periods of time.
-
Refer all sending to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The apparatus shall be cremented to a KAWKS socket outlet with a protective sealing connection.
-
Where the MARS plug or an appliance outlet is used as the disconnect device, the disconnect device shall remain mostly opseite.

- Correct disposal of this product. This symbol indicates that this product must not be disposed of with household waste, according to the DELL Directive (UN 2019/8) and shall be
should be taken to a collection center (terms) for the recycling of waste electrical and electronic equipment (TEI). The impounding of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with TEI, at the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. 18. Do not install a confined space, such as a book case or similar unit. 19. Do not place elevated flame sources, such as lighted candles, on the apparatus.
-
Please keep the environmental aspects of battery disposal in line. Batteries must be disposed of at a battery collection point.
-
This apparatus may be used in tropical and moderate climates up to 45^ .
LEGAL DISCLAIMER
Music Tribe accepts my liability for any loss which may be suffered by any person who criticizes either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Wides Klink Teknis Lab Surgeon, Lae, Tanoos, Turbozond, JK Electronic, J Chelon. Beteiligungs, Bureign, Elseheim, Gautam, Aston Kiosophones and Coudria are trademarks or registered trademarks of Music Int'l Global Brand Ltd. © Music Tribe Global Brand Ltd. 2021 All rights reserved
LIMITED WARRANTY
For the applicable warranty terms and conditions, and additional information regarding Music Title's Limited Warranty, please see complete details online at musicrob.com/warranty.

Instrucciones de
seguridad

CAUTION
SK OF ELECTRIC SHOCK DO NOT OFF
ATTENTION
RQUIDTECTTACNT
La terminale: menarcaion con this esimilio transportiro corrente eletroiche in magmatic sulfo conteo come par concerto un esegio de meccanica. Utilize solcabels de alstroconveluncios y atela callicado con comestores 15 s d. 6.3m de la bayoseta prefjados. Consulta el cta instruccion a modification de la revista uncumentaire por un service优质的.
BESCHRANKTE GARANTIE
- Implementing operation objective cdi: implementation in documentation at equals. Simulate a legger minute.

Attenzione
Perridum trischoi di sone cedenthe
Create expression object with applet expression
print('Hello, this is a test function')
specific method of producer:

species in camels: camelidogonadis prete lemurin du caudalbrattentus.
- Anandranath medag, stacia, trinity, hikkite her four arm angels at the kithekan, ether soms ill-summummed apprentice.
tikimngpansitivitukus yerligate information on Music Tribe's begandane pansitiv, shtafisting information on online psh musictri.com/Weerenty
NL
SE

35







4.Nalcy postbpoowz zopdniz instrukca obslig.
5. Urephninae n wodnyuyny wipinny uwo.
6.Urephninae muzna cysk ywicn suh sncma.
7. Zr. sridaricae wodnyu wipinny
Wise pubicnacu unipemnale aley prceerugnt zaeauon producto.
-
We stonow uzyzuznaya wodobiny model coeck taich, jas gruizniel, priece kubuzdiania poduskaje coee (no. wronozanica).
-
Wzidrom wespacificiare nayie uzwast zabozim zu wzyazd thudugunamotn ot yzwiak umumim. Wyzhika thudugunamotn poskita dva uyki kortakowne od stred srozovskii, Wyzhika z umumim me dva uyki kortakowne od stred srozovskii umumim. Serey wyki kortakowne ub duzhnyu wyizniukom uzm a do zapemeniye baprechni zasymuskruyon. Jisk format wyziki uzadarenii me odposodni steradnykh praznae, prazy zamier se de ekolnya pro zpala uymeniyam graudia.
-
KabelSDKsnyane na lyuKzT, alehmy bH
narnanya na de prrnir n cranrny oynk knovoc, co
moglycra deprovidnr da jogo zhenokcnia. Szegedyj
szugne warky na rady a odowridng chiroe-nyk a
pohluy zkycki pradzhacny znojnye, kyskrn
kabel skosnye prazymochniy du zdozakrnca. -
2003 题型 M1: 求作 p -adic 的 span_max 程序的二乘问题.
-
Jules royskiouw has a good sense of anatzenaetio poin fumicn yedzckia to musa one by zwee hawh hingme
-
Uyawu, A., Ayubun, M., and Peltola, J. (2006). How to recognize the difference between the two types of information in a text.

- Uglyw
jellys/zea/azy/ay
puce production
jué/zhuyi/gy
jué/za/azu
vanishing, vanishing, vanishing, vanishing
poruguaia is icuichm oicuyc hucwacce gil
nizocwic w tka prnncnere cemnusdy. uicnng
meteepiezua ptticai y i 1
- Wt kruke ou no zau du zuzu nau neuyuun
urupnna maly wuy wuy wuyy uudrnnn rnuwogua. - Wykwnnne waeiaknich npnrnny ranecl
jeyle ydywblzceynnay plaonmnnn servdo.
Ppnooanenpnncn pnpnncn ngnngnagc sge
Ie knuhre, jie uynnne ane uodnne o
jukhnioknep (doy) cayocu lyatka kiaia kivsegnov
bub wcyk, jie co wcyk zda aegnnd sto
prednckly hub cek, jie uynnnn eny wrynnnne bdo
na dozirin dezacn bu wizg, jie uynnnn re
funkugnpe papwne ane kdy spnnn na pongde

electrónica y el electrónica (VOL1), 22(12):197-198
brat porpesis imi yroniki, bilingy product mixay
prodó de su nucletec y porcine yhizik yuniguy
sprézia electrónica y elektronica y. Kirschfeld
postparteje z e la hipa opalipriam de wryocyl
schlafte bilanci na sncrowski naturalizji i
abscisic berbera z eorodar potenjnykrsubsnig
mtehnioknizkiy zhezakryi zhe juzo yahrjuy
dostoryxia kldomkrzyns, noreosrnoe, fucjkwadz
prudnlozy uzyazny zimegdoje prozeyna sye
de escherezhny zvychyrosyia zasubnya nauryh.
Szczocnyi ofofni zimskop, woteryk mreia
odovac zhyezy snye de recynginy, uzahyr uzydy
meykra, pridnobradnyu zkyjny chtaratny lab
nuplnye zkyi ulyzny zhtaray.
18. He installed us organized presens, zaksik jaki polka kajakub pod podzost zerni.
19. He wasn't an ordinary student of the company oom.
I think he is quite clever.
20. hareky panmay a odostratiosyach apokath nyoocji bateri. Baterie nyelny yonmaw w pumice zhichi bateri.
21. To unrecognize more by using a Klinezopit ketylporphyrin 1 immunosorbant to do 65^ .
ZASTRZEZNIA PRAWNE
Kishti:Kribe nge oipodwntinlisi z
pkiyewes straty, kire mqa opie sto ckiy, kire paojag in tana hub wcpn ag jakimintier opini,
tugulab uhl siblcnic, zawynm y iminyon.
dokomnir. Socphyde technicaln, wqxted line.
infarma oogu miue zmez bi prorondion.
Wvckiyke maki comumae qovsivacik h
opadwchid wskshcndil. Mlls, Kank Tekni.
LaGrupen, Laie, Janoy, Turbounot, I Electronic.
T Celkom, Bheinberg, Burgun, Othornet, Jurotane,
Palm Kiosponnes i Codendur ng kramharn coumowymi
bu zanizemnye naink anmnyon nyfmyr
Kishti:Kribal Brands Ltd. @ Kishti:Kribal Gbbl Brands Ltd. @ Wvckiyke prawaz zanizemny.
OGRANICZONA GWARANCJA
gozmjz 1. drotzimfjy oedermjzdo zogzmjy ozgzmjy gomjz kizm jz, zoazjzajr zoz yzostmki szgzmjh to tryb ne ojod zed ozemmi muscni.comwerrn.
QuickStep, Inc.
11
Introduction
Thank you for purchasing this Tannoy Cooling Bodepaker. This product range is suited for high-level music and speech reinforcement applications requiring exceptional tonic quality with uncompromised reliability.
The loudspeakers in this series are for indoor dry use.
Unpacking
Fery Taxn pndy and acceessry is carefully inspeclled before packing. After unpaing, please inspect your prout to make sure no damage has occured in transit. In the unlikely event of any damage, would you please notify your deater immediately and return your shipping carton, as your deater may ask you to return the faulty unit to them for inspection.
Each CVS load-leader is packed in pairs and provided with the following accessories as standard: C Ring, tile-bridge kit, cut-out template, and paint mask. A platter (may) ring, 48" tile is also available as an optional extra.
Safety Notices
Some regional construction codes require the use of a secondary method of securing loudspeakers in ceiling to provide security of a backup support. A secondary support line should be attached from the safety loop on the roof of the product to a source point on the ceiling. Please consult the relevant construction codes in your region.
When using a power driver to install the product it is essential to use the correct torque level settings to avoid over tightening and damage to the ceiling material or clumps.
Recommended torque setting: 1.5Nm.
Tammy will not be held responsible for any damages caused by the improper installation of these loudspeakers.
In this study, we evaluated the effect of a combination of physiologic and pharmacological factors on the risk of cardiovascular events in patients with acute coronary heart disease (CHD). We found that the combination of physiologic and pharmacological factors resulted in a significantly lower incidence of CHD compared to the placebo group.
Introduccion
The conditions of the system of equations are given in the text.
Introduction
e t i r t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t d
The loudspeakers in this series are for inclusion dry use.
Unpacking
ery r t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t d
Each CVS loudspeaker is packed in pairs and provided with the following accessories as standard: C Ring, tile-bridge kit, cut-out template, and paint mask. A Plaster [med] ring, 48^ tile rail is also available as an optional extra.
Safety Notices
Some regional construction codes require the use of a secondary method of securing leadspeakers in ceiling to provide security of a backup support. A secondary support line should be attached from the safety loop on the rear of the product to a source paint on the ceiling. Please consult the relevant construction codes in your region.
When using a power driver to install the product it is essential to use the correct torque level settings to avoid over tightening and damage to the cooling material or clamps.
Recommended torque setting: 1.5Nm.
Tannery will not be held responsible for any damages caused by the improper installation of these loudspeakers.
In the case of the non-convex solution, we obtain the following result. In [10, 19] it was shown that for a given > 0 there is a constant _0 > 0 such that for any x (0, +) there exists a constant > 0 such that for all x (0, +) there is a constant > 0 such that for all x (0, +) there is a constant > 0 such that
Introdução
Oligo é à adjurent cette alto-filante tenu. Essin lait de produet a adequado para mablo de alto nvel e aplicaoes de refiroo de fata que querearem qualidade sonorica exceptionnel com confidiablo des comprometricn.
The 1000th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 100th of the 10
Invoering
Bank von uher schaften van de Tanae-paefonduduspiere. Depe products is geschicht waar muzik - en sprakiersterkingstoapssingen op hoo inne die uzondernde gehuidukst met ompromissbe tewebauwbaed verteen.
For each i value for different treatment groups (with N_i and C_i as the number and the _i values, we assume that treatment is random across treatments using a Gaussian distribution. The sample size of the treatment group is fixed at 100. For each treatment group, we assume that there are no multiple comparisons and that all comparisons are based on the same outcome.
Wprowadzenie
Deknajemy z uak zukotne sifluktowag tarnoy. I sera produtov je prestzernaroda do zastochan z wizyach z myzui wzmarianni muoy na yaskom pozimie, wymagayc aywch yawtowag ikiwi diqvus bikkompromilny joznevocino.
Gloinii tci sipzneatae do uitu wuchy pumicsceniach.
Rozpakowanie
Kady prodkt t s i p r a o e i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i 1
Product Feature Identification (CVS-601 shown)



Auxiliary support ring is not shown.
Quick Step Guide
17
Accessories
Standard Accessories


I like this bit.
He's a little bit
much more so than I
think he might be
supporting close ties


Optional Accessories


EN
18 75 series
Installation Guide for Suspended Ceilings
NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.
- Remove the ceiling tile from its frame and place it on a flat surface. Mark the cut out area on the ceiling tile by trading around the template provided (Fig. 1).
- Cut out the hole in the ceiling panel using a circular saw or pad saw (Fig. 2). Place the C-ring and the wire bridge on top of the ceiling panel, aligning the C-ring over the hole, and screw the C-ring to the tie bridge using the fittings provided. (Fig. 3)
- Slide the speaker assembly through the hula and turn the screws so the front of the speaker to extend the mounting wing. Tighten the screws until a firm grip is achieved.
If using a power driver, Tantray recommends a torque setting of 1.5Nm (Fig.4). DO NOT OVERLIGHTEN!
- Slide the tile panel back into the suspended ceiling. The tile bridge ends will catch over the rails, supporting the weight of the speaker. (Fig. 5)
- Connect a secondary support line to the safety tab. Some construction codes require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region.
Go to page 15 for instructions on writing and set-up instructions.





Installation Guide for Drywall Ceilings
NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.
- Mark the cut-out area on the ceiling by trading around the template provided, (Fig.1)
- Cut out the hole in the ceiling using a pad saw, then slide the C-Bing into the ceiling, aligning it over the cut out holes. (Fig. 2)
- Go to page 15 for wiring and set-up instructions then return to point 4 below.
- Connect a secondary support line to the safety tab. Some construction orders require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region.
- Slide the speaker assembly through the hole and turn the screws to extend the mounting wing.
Tightly the screws until a firm grip is achieved.
Using a power driver, Tanny recommends a torque setting of 1.5 km (Fig.3)
DO NOT OVERTIGHTEN! - insert grid by pushing it onto the speaker.
Quick Star Guide 19
EN




20 155
Installation Instructions for Optional Plaster Ring
An optional plaster (must) drag bracket is available from Tanny. This bracket is designed to be pre-installed into newly constructed, non-supervised ceilings.
NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.
1. kailor screw the plastering to the jolts.(Fig.1)
2. Lay the speaker wiring to where the speaker will be fitted and complete the plastering work on the ceiling.
3. Cut out the hole in the ceiling using a pad saw. (Fig.2)
4. Go to page 15 for instructions on wiring then return to point 5 below.
5. Connect a secondary support line to the safety tab. Some construction codes require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region.
6. Side the speaker assembly through the hole and turn the screws to extend the mounting wings. Tighten the screws until a firm gap is achieved. If using a power driver, Tammy recommends a torque setting of 1.5Nm. (Fig.3) DO NOT OVERTIGHTEN!
7. Insert gille by pushing it onto the speaker. (Fig.4)




QuickStep, Inc.
21
EN
Wiring and Setting Up
NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.
We recommend the use of insulated speaker wiring between 12 and 18 AWG.
WARNING: The power to the amplifier must be turned OFF when making connections to the loudspeakers.
All connections must be checked before turning the amplifiers.
- Remove the wining cover at the back of the speaker can to access the removable Euro-type connector plug and socket.
- The speakers come with a standard speaker cube clamp [Fig.1], and an optional qland for EHS-42A applications [Fig.2]. (Please note that EHS-42A does not cover the CVS B015 and CVS0512 sulzeformers.)


- Feed the cable through and attach to the Euro-type connector (Fig.3).

- For connection to an amplifier, use Pins 1 and 2 (Figs.3,4,5).
Make sure that the wiring polarity is correct, where:
Pin 1 is positive
Pin 2 is negative.
For connection to additional speakers in a distributed line (Fig.4)
Pins 3 and 4 are used to keep thru to additional speakers:
Make sure that the winning polarity is correct, where:
Pin 3 is positive


22 155
- Tighten the cable clamp or cable gand and plug in the Euro-type connector to the loudspeaker, replace the rear cover and securely tighten the supplied screws.
- The speaker is fitted with a multi-tap transformer for use in distributed-line systems (Fig. 8). There is also a LO2 tap. Select the required tap before pushing the grill in place. The average impedance of each speaker in this range is 8 ohms in the LO2 setting.
CAUTION: THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPFLIER WHILE THE SPEAKER IS SET FOR LOW IMPEDANCE (LOZ).

CVS301CVS401CVS601CVS801CVS8015
Fig.6 Speaker Tap Selector Switchs
Installationsguide for undertak

CYS801CYS8015CYS8015LZ


65
| Performance | |||||||
| Frequency (10Hz) | 85 Hz-19 Hz 10Hz | 20-40Hz 10Hz-20 Hz 20Hz | 40-20 Hz 20 Hz-20 Hz 20 Hz | 40-20 Hz | |||
| Frequency response(1.0Hz) | 68 Hz 20 Hz-70 Hz | 30 Hz 74 Hz-20 Hz 65 Hz | 20 Hz 31 Hz-70 Hz 13 Hz | 20 Hz | |||
| Sensitivity at 100 W | 85 dB | 84 dB | 90 dB | 90 dB | 92 dB | 92 dB | |
| Directivity factor(0)around 1Hz to 6 kHz | 4.1 | 5.4 | 7.3 | 10.2 | N/A | N/A | |
| Directivity index(0)around 1Hz to 6 kHz | 6.1 | 7.3 | 8.6 | 10.1 | N/A | N/A | |
| Power banding LOQ | |||||||
| *1 Average | 20 V | 50V | 50W | 50 W | 100 W | 100 W | |
| Programm | 40 W | 60 W | 100 W | 180 W | 250 W | 250 W | |
| Peak | 50 W | 120 W | 200 W | 360 W | 400 W | 400 W | |
| Recommended amplifier power | 40 W@8Ω | 60 W@8Ω | 100 W@8Ω | 135 W@8Ω | 200 W@8Ω | 200 W@8Ω | |
| Nominal Resistance(Switch in LO2) | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | |
| Rated maximum SPI(1m, Switch in LO2) | 101 dB | 100 dB | 110 dB | 111 dB | 115 dB | 115 dB | |
| Average | 96 dB | 93 dB | 107 dB | 110 dB | 112 dB | 112 dB | |
| Peak SPI | 104 dB | 105 dB | 113 dB | 116 dB | 118 dB | 118 dB | |
| Transformer taps | |||||||
| 70 V | 15 W/75 W/3.5 W/12 W | 25 W/125 W/6.5 W/32 W | 30 W/15 W/7.5 W/35 W | 50 W/30 W/15 W | 80 W/40 W/25 W | 80 W/40 W/25 W | N/A |
| 100 V | 15 W/75 W/35 W | 25 W/75 W/35 W | 30 W/75 W/25 W | 50 W/30 W/15 W | 80 W/40 W/25 W | 80 W/40 W/25 W | N/A |
| Coating angles | |||||||
| 500Hz | 180° | 180° | 180° | 180° | N/A | N/A | |
| 1 MHz | Horizontal: 135°Vertical: 110° | Horizontal: 125°Vertical: 110° | Horizontal: 124°Vertical: 124° | Horizontal: 126°Vertical: 118° | N/A | N/A | |
| 2 MHz | Horizontal: 75°Vertical: 82° | Horizontal: 82°Vertical: 82° | Horizontal: 84°Vertical: 76° | Horizontal: 124°Vertical: 107° | N/A | N/A | |
| 4 MHz | Horizontal: 135°Vertical: 165° | Horizontal: 85°Vertical: 86° | Horizontal: 76°Vertical: 92° | Horizontal: 63°Vertical: 63° | N/A | N/A | |
| Transducers | |||||||
| Low frequency | 76 mm (5" PP cone) | 100 mm (4" PP cone) | 165 mm (6.5" PP cone) | 200 mm (8" PP cone) | 200 mm (3" Paper cone) | 200 mm (8" Paper cone) | |
| High frequency | N/A | 20 mm (10.79°)carfully mounted | 20 mm (10.79°)carfully mounted | 25 mm (11°)carfully mounted | N/A | N/A | |
| Physical | |||||||
| Closeness | Blind mount (BM) | Blind mount (BM) | Blind mount (BM) | Blind mount (BM) | Blind mount (BM) | Blind mount (BM) | |
| Back can | Anodized stool | Anodized stool | Anodized stool | Anodized stool | Anodized stool | Anodized stool | |
| Baffle | Baffle mounted ill 540 d#ated BSS | Baffle mounted ill 540 d#ated BSS | Baffle mounted ill 540 d#ated BSS | Baffle mounted ill 540 d#ated BSS | Baffle mounted ill 540 d#ated BSS | Baffle mounted ill 540 d#ated BSS | |
| Globe | Aluminum, powder coated | Aluminum, powder coated | Aluminum, powder coated | Aluminum, powder coated | Aluminum, powder coated | Aluminum, powder coated | |
| Safety features | Rear enclosure safety ring for hand-bearing bond | Rear enclosure safety ring for hand-bearing bond | Rear enclosure safety ring for hand-bearing bond | Rear enclosure safety ring for hand-bearing bond | Rear enclosure safety ring for hand-bearing bond | Rear enclosure safety ring for hand-bearing bond | |
| Clamping design | Security toggle clamp | Security toggle clamp | Security toggle clamp | Security toggle clamp | Security toggle clamp | Security toggle clamp | |
| Connectors | Euroblock-style conductor with screw terminals(with input cover and cable gland supplied) | Euroblock-style conductor with screw terminals(with input cover and cable gland supplied) | Euroblock-style conductor with screw terminals(with input cover and cable gland supplied) | Euroblock-style conductor with screw terminals(with input cover and cable gland supplied) | Euroblock-style conductor with screw terminals(with input cover and cable gland supplied) | Euroblock-style conductor with screw terminalswith input cover and cable gland supplied) | Euroblock-style conductor with screw terminalswith input cover and cable gland supplied) |
| CIS 301 | CIS 401 | CIS 601 | CIS 801 | CIS 1015 | CIS 1015.12 | |
| Densities: | ||||||
| Bent diameter (gill max diameter) | 200 mm (8") | 200 mm (8") | 254 mm (10") | 305 mm (12") | 305 mm (12") | 305 mm (12") |
| Base of battle to rear of back cat | 150 mm (5.5") | 150 mm (5.9") | 208 mm (8.19") | 270 mm (8.35") | 292.50 mm (11.52") | 292.50 mm (11.52") |
| Base of battle to top of safety strip | 148 mm (5.63") | 163 mm (6.42") | 221 mm (8.70") | 225 mm (8.86") | 305.5 mm (12.03") | 305.5 mm (12.03") |
| Base of battle to over of fire cat cat | 155 mm (6.10") | 175 mm (6.89") | 233 mm (9.43") | 237 mm (9.33") | 312.5 mm (12.57") | 312.5 mm (12.57") |
| Hole cutout diameter | φ12 mm (6.77") | φ12 mm (6.37") | φ22 mm (8.74") | φ22 mm (10.75") | φ23 mm (10.75") | φ23 mm (10.75") |
| Net weight | 2.1 kg (5.30 lbs, 1.07%) | 2.7 kg (6.09 lbs, 1.02%) | 2.1 kg (6.09 lbs, 1.02%) | 5.35 kg (11.77 lbs, 1.07%) | 7.55 kg (15.45 lbs, 1.07%) | 7 kg (15.45 lbs, 1.07%) |
| Included accessories | Metalgate, cable gland, flex conduit, C-ring, the bridge kit, paint mask, cutout template | Metalgate, cable gland, flex conduit, L-ring, the bridge kit, paint mask, cutout template | Metalgate, cable gland, flex conduit, C-ring, the bridge kit, paint mask, cutout template | Metal gate, cable gland, flex conduit, C-ring, the bridge kit, paint mask, cutout template | Metal gate, cable gland, flex conduit, C-ring, the bridge kit, paint mask, cutout template | Metal gate, cable gland, flex conduit, C-ring, the bridge kit, paint mask, cutout template |
| Optional accessories | Must ring 6" the rail | Must ring 45 " The rail | Must ring 6" The rail | Must ring 45 " The rail | Must ring 45 " The rail | Must ring 45 " The rail |
| Packed quantity | 1 pair | 1 pair | 1 pair | 1 pair | 1 pair | 1 pair |
^ Average power rating is under IEC-shaped pink noise with a 6dB crest factor for ICD hours continuously.
Other important information

Important information

Informations importantes

Herby, Mark Tribe declares that this product is in compliance with Directive 2011/6/E and Amendments 2015/83/E/3rd, Directive 2017/19/E, Regulation 519/2012/84/2015/6W and Directive 1987/2006/CC, and this passive product is not applicable to UK Directive 2014/15/E, vth Directive 2014/15/E.
Full text of EU Dec 2015 available at https://community.susanne.com/
U Representative. Medicus Tiere Brand: AB/SA
Address: St Esping Ostroge Drive 17, DK-5200 Aarhus, Denmark
EN