DC Runner 1.3 - Water filter Aqua Medic - Free user manual and instructions

Brand	Aqua Medic
Model	DC Runner 1.3
Product type	Flow pump / Water filter
Power supply	12-24 V DC
Power consumption	9 W (at 79% power)
Maximum flow rate	1300 L/h (estimated)
Maximum head height	1.5 m (estimated)
Dimensions (L x W x H)	150 x 80 x 100 mm (estimated)
Weight	1 kg (estimated)
Connectivity	Wi-Fi 2.4 GHz (2.4 GHz band only)
Control app	Aqua Medic (iOS and Android)
Main functions	Manual mode (30-100%), feed mode, scheduled programming, group operation
Manual mode	Flow adjustment via semi-circular slider from 30% to 100%
Feed mode	Temporary pump stop for an adjustable duration
Programming	Creating time slots with STOP, AUTO, FEED modes
Group function	Ability to combine multiple pumps and program them together
Error codes	Er01 (overcurrent), Er02 (overheating), Er03 (dry run), Er04 (blockage), Er05 (overvoltage)
Maintenance and cleaning	Regular cleaning of the rotor, bearings, and pump; the rotor must rotate freely
Safety	Protection against overheating, overcurrent, overvoltage, dry run, and blockage
Spare parts and repairability	Rotor and bearings replaceable; contact Aqua Medic after-sales service
General information	Manufactured by AB Aqua Medic GmbH, Germany; subject to technical modifications

Frequently Asked Questions - DC Runner 1.3 Aqua Medic

How to connect the DC Runner 1.3 pump to my Wi-Fi network?

Make sure your phone is connected to a 2.4 GHz Wi-Fi network. Press the Wi-Fi button on the controller for about 5 seconds until the Wi-Fi symbol flashes. Open the Aqua Medic app, press 'Add', select the pump type, then choose the smart configuration mode. Follow the on-screen instructions.

What to do if error code Er03 appears?

The code Er03 indicates a dry run or empty operation. Check the water level in the aquarium or reservoir, and clean the pump. Make sure the water inlet is not blocked.

How to manually adjust the pump flow rate?

In the app, press and hold the pump icon to access the control page. Use the semi-circular slider to adjust the flow between 30% and 100%. The selected power is displayed in a circle.

Can I program the pump to stop automatically at certain times?

Yes, you can use the programming function. Press and hold the 'PROGRAM' button in the app to access the settings. You can set time slots with modes STOP (stop), AUTO (automatic), or FEED (feed).

How to clean the DC Runner 1.3 pump?

Unplug the pump. Remove the rotor and clean it and the bearings with fresh water. Make sure the rotor can rotate freely. Do not use harsh chemicals. Reassemble carefully.

Why is the pump not connecting to my Wi-Fi?

Check that your Wi-Fi network is on the 2.4 GHz band (the pump does not support 5 GHz). Make sure your phone is connected to the same network. Reset the pump by pressing the Wi-Fi button for 10 seconds to enter AP mode, then try again.

What does error code Er04 mean?

The code Er04 indicates that the pump is blocked and the impeller is not turning. Clean the rotor, bearings, and pump to remove any obstruction. Check that the rotor rotates freely before restarting.

How to create a pump group?

In the app, go to the 'My groups' menu and press 'ADD'. Select the pumps you want to group. You can then program and control all pumps in the group simultaneously.

What is the maximum power of the pump?

The pump can reach up to 100% of its power, which corresponds to approximately 9 W power consumption. The maximum flow rate is estimated at 1300 L/h depending on the model.

Can I use the pump without the smartphone app?

No, the pump is controlled exclusively via the Aqua Medic app on a smartphone or tablet. The pump does not have local manual controls other than the Wi-Fi button.

USER MANUAL DC Runner 1.3 Aqua Medic

ENG Operation manual

Please read the manual carefully before use! P. 8-13

F Mode d'emploi

Reset your password Enter your email and we'll send you a link to reset your password. Enter your email address NEXT EXIT EXIT FOR YOUR NAME

Abb. 3: Passwort Reset

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

Add My devices My groups Settings AQUA MEDIC

AQD_DFDIFA 82 30 100 OK Please select previous 2 program media. Fixed Printgram AQUA MEDIC

AQO_0F01FA 82 Feed Turn on Feed Feed Pause Time 10 minutes 3 OUT SWEI Through request to show your user's content Feed Program AQUA MEDIC

AQO_OF01FA 82 30 100 OK Please click "Import all program minutes" Feed Program AQUA MEDIC

Program AQUA MEDIC Tap inside slot or too any place on time circle today to add! EXP APPS ADD AQUA MEDIC

AQO.OFD1FA 82 30 100 OK Please select manual if paragraph needs Feed Program AQUA MEDIC

Menu Rename > Delete Device >

My Devices My Groups No groups ADD EXIT Just My Group My Group AQUA MEDIC

Add Group Group Name: Enter Group Name Group Devices: ADE_857089-L ADE_4A1C14-R ADE_302A69 ADE_AA933C OK CONFIRM

Operation Manual for the App to control Aqua Medic pumps of the DC Runner x.3 series

1. APP Download

The APP name "Aqua Medic", is available in App Store for Apple users and Google Play for Android system users. User can search "Aqua Medic" in either APP Store or Google Play to download the application. Alternatively, user can scan the barcode on the package or on our homepage (www.aqua-medic.de) to download the application. (Note: Scan function in certain countries or areas may not be able to read the barcode properly.) We recommend to only use the APP on smartphones, since using it on tablets can lead to errors in the display.

2. User registration, login and password reset

2.1. Account registration

Login AGUA.MEDIA Create your account Enter your email Create accounts Custom passwords CREATE EXIT

Fig. 1: Aqua Medic App for controlling current, circulation and dosing pumps

Open Aqua Medic App and tap „CREATE NEW ACCOUNT“.

Fill in the information as required and tap „CREATE NEW ACCOUNT“.

After registration, return to the login page and create an account and password to log in.

Note: Please only use your e-mail address to register (no phone number), because registration by telephone number cannot be used in Europe.

After successful registration, the desired pump can be installed and connected to the power supply via the controller.

79% 9W

Fig. 2: Display pump controller

Press the WiFi button for about 5 seconds and the flashing icon indicates entering the smart network distribution mode (WLAN). Press the WiFi button for about 10 seconds and the flashing icon and AP word in the lower right corner indicate entering the AP network distribution mode.

The smartphone used has to be in the same WiFi network as the pump to be linked to.

2.2. Reset password

Tap "Forgot password" on the login page. Enter your e-mail address and tap "Send link". Check your e-mail and follow the instructions to reset your password.

AQUA MEDIC

Reset your password Enter your email bird, we'll need you a link to reset your password. Make your email attributes NEXT EXIT EXIT OR EXIT

Fig. 3: Reset password

3. Add a pump to a network

Click on "Add" in the lower left corner of the APP and on the following page select the device type to be added. In case of a circulation pump of the DC Runner x.3 series, choose the pump symbol "Pump".

Configuration mode: Make sure your phone is connected to 2.4 G band WiFi before configuration. It doesn't work in the 5 G band WiFi.

There are two types of configuration modes: Smart configuration and AP configuration modes. Choose the „Smart Configuration Mode“ to link your device. The AP-mode is not available at the moment.

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

Fig. 4: The desired mode is confirmed by tapping on the circle above the lower arrow. By tapping on "AP Network" or "Smart Network" next to the upper arrow (the arrow is not available in the APP), you can switch between the two modes. (The "Smart Configuration Mode" must be selected here. The green and red LEDs only flash in the case of dosing pumps; in the case of pumps, the blue WiFi symbol flashes in the controller).

3.1. Smart configuration (WiFi-mode)

This is the mode for pump control via WiFi. Press the WIFI button for about 5 seconds and the WIFI indicator flashes. The device is in WiFi configuration mode.

When the WIFI symbol flashes in the upper right corner of the pump controller, tap "Device is in smart configuration mode" and click "NEXT". Positioning must be switched on in the settings of the smartphone used. Follow the instructions. Check that the network name is correct (if not, the smartphone is in the wrong network), then enter the correct WiFi password and tap "NEXT".

Make sure your pump, phone, and router are as close together as possible during the configuration process.

AQUA MEDIC

Fig. 5: The tick must be set after the device's name before tapping on "NEXT".

Now, select the device in the APP that you want to add, tap on the device's name (a tick appears after the device's name) and then tap on "NEXT".

AP network: Not available at the moment.

4. Pump control

Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC Aqua MEDIC

Fig. 6: Page „My Devices“

In the APP, on the page "My Devices", tap the device's symbol of the desired pump for two seconds to call up the device control. If you only briefly tap the symbol, the respective device is switched on (blue symbol) or off (grey symbol). After successfully adding the pump, press and hold the pump icon for two seconds to enter the pump control page.

4.1. Manual mode

AQD_OFID1FA 82 30 100 OK Planesuitable version of a program code Feed Program AQUA MEDIC

Fig. 7: Pump control

AQUA MEDIC

By adjusting the semicircular bar, the pump power can be varied between 30 and 100%. The selected power is displayed in the circle.

Manual feeding mode (FEED):

Within this time, the pump stops operating according to the set feeding time. Touch the FEED icon for two seconds to enter the feeding settings.

AQD_0FD1FA Feed Turn-on Feed Feed Pause Time 10 minutes ? 800 900 Please check if to continue using your system Feed Program AQUA MEDIC

Fig. 8: Feeding settings

Program mode:

AQD_OF01FA 82 30 100 Phone:com/rents or program.AQUA MEDIC Feed Program AQUA MEDIC

Fig. 9: The "PROGRAM" button takes you to the programming function.

Press the "PROGRAM" icon for two seconds to enter the settings page and set the pump's operating mode at different times of the day including pump stop, automatic and feeding.

Program AQUA MEDIC Tap music icon or tap any planes on time circle travel to exit. STOP AUTO FREE AQUA MEDIC

Fig. 10: Touch the "STOP, AUTO, FEED" symbol or double-touch the circle to edit the respective period.

AQUA MEDIC

Double-tap the circle to go to the time setting page. The time can be set by using the slider or the time buttons below. Then, select the working mode for the set period (STOP, AUTO, FEED). Tap "SAVE" to save the setting made. If you want to delete the current adjustment, tap "DELETE".

After completing the settings, return to the main page and tap the program icon to enter Program mode. Program mode is exited when you make manual settings.

AQO.OFO/IFA 82 30 100 Fixed AQUA MEDIC Fixed Instagram

Fig. 11: In the menu at the top right it is possible to rename or delete pumps.

Menu Rename > Delete Device >

Fig. 12: Rename pumps or delete

5. Group operation

Add My Biocaine My Green Saiming AQUA MEDIC

Fig. 13: Under the menu item "My groups" it is possible to combine several pumps into a group and to program them jointly.

AQUA MEDIC

My Devices My Groups No groups ADD EXIT Aua3 My Documents My Documents Settings AQUA MEDIC

Fig. 14: First of all, select „ADD“ ...

Add Group Group Name: Enter Group Name Group Devices: AQE_857089-L AQE_4A9C14-R AQE_302A68 AQE_4A933C CODE IBM

Fig. 15: ... and then select the pumps from the list that are to be combined into a group.

6. Error code and APP error description

Er01: Controller overcurrent. Abnormal working current. Check whether the pump is live or the controller is defective.

Er02: Controller overheated. Check if the controller is exposed to sunlight or in a high temperature environment.

Er03: Pump is running dry or idling. Check the water level, clean the pump.

Er04: The pump blocked. The impeller stops running. Clean the impeller, bearings and pump. The impeller must be able to turn freely.

Er05: Controller overvoltage. Abnormal working voltage. Check the input supply voltage.

AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany - Technical changes reserved - 02/2021/v4

Login NEW Create your account NEW APIA.MedicHE Enter your email Enter your password Etain your email Create password Confirm password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain you email Create password Confirm password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Etain your password Estrain you email Create password Confirm password Estrain you email Create password

Reset your password Enter your email and we'll send you a link to reset your password. Enter your email addition

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

AQD_DTORFA 82 Feed Turn-on-Feed Feed Pause Time 10 minutes > SBT SBRL Balance, sweet, double in your head level. Feed Program AQUA MEDIC

Mode programme (PROGRAM):

AQO_0FD1FA 82 30 100 Present version: InNUT 14.00/47 seconds Feed Program AQUA MEDIC

Program AQUA MEDIC Tap mobile room or tap any phone on time toggle twin to exit. STOP AUTO FEB AQUA MEDIC

AQD_0FD1FA 82 30 100 OK Phone: at&T Institute of Group Inc. member Food Program AQUA MEDIC

Menu Rename > Delete Device >

My Devices My Groups No groups ADD EXIT AQUA MEDIC

Add Group Group Name: Enter Group Name Group Devices: AQE_857089-L AQE_4A9C14-R AQE_3B2A69 AQE_4A933C CONF 304

Login MORE Create your account MORE AQUA MEDIC Enter your email Enter your password Enter your email Create your account Create password Confirm password LOGIN CREATE EXIT REDACT BY YOUR NAME

AQUA MEDIC Reset your password NEW Enter your email and we'll send you a link to insert your password. Cancel your email password MOST OK Next or Your Email

Fig. 3: Reset password

Add device → AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

Add My disease My genuin Savings AQUA MEDIC

Fig. 6: Pagina „My Devices“

Physical asset, manual or program tools Fixed Program AQUA MEDIC

Fig. 7: Pump aansturing

AQUA MEDIC

AQD_DFOISA 82 Feed Turn on Feed Feed Pause Time 10 minutes > OFF 3MEL Sleep sweet, Descent of Cigarette Drink. Feed Program AQUA MEDIC

Fig. 8: Voeder instellingen

Programma mode (PROGRAM):

AQO_OF01FA 82 30 100 5% Pre-saved: field in program tools Field Program AQUA MEDIC

Program AQUA MEDI Tap mobile from or keep any phone on time circle twice to add. STOP AND STOP AQUA MEDI

AQD_DFD1FA 82 30 100 OK Progress: 100% (No progress) Options: Feed Program AQUA MEDIC

Menu Rename > Delete Device >

My Devices AQA_C18A09 ADD My device My group Settings AQUA MEDIC

My Devices My Groups No groups ADD EXIT A3D My Documents My Course Savings AQUA MEDIC

Fig. 14: Allereerst, kies „ADD“ ...

Add Group Group Name: Enter Group Name Group Devices: AQE_857D89-L AQE_4A9C14-R AQE_302A69 AQE_4A933C CONFIRM

Login NEW Create your account NEW your email Create password. Confirm password Enter your email Enter your password LOGIN CREATE EXIT REGISTER BY HOME KEY

AQUA MEDIC Reset your password Enter your email and we'll send you a link to have your password. Enter your email solution NEXT EXIT ANY YOU NOW

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

AQO.OFOIFA 82 30 100 OK Please select features in your own account Fand Program AQUA MEDIC

Fig. 7: Control de la bomba

AQUA MEDIC

AQO_QFD1FA 82 Feed Turn on Feed Feed Route Time 50 minutes > OK Cancel AQUA MEDIC Feed Program

AQO_OF01FA 82 30 100 OK Please request feedback or program needs Feed Program AQUA MEDIC

Menu Rename > Delete Device >

My Devices My Groups No groups ADD EXIT AQUA MEDIC

- Technical changes reserved - 02/2021/v4

AQUA MEDIC Reset your password NEW Enter your email and we'll send you a link to reset your password. Entry your email address NEXT EXIT EXIT BY 2019-04-08 2019-04-08

Fig. 3: Reimposta password

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

AQO, OFD1FA 82 Feed Turn on Feed Feed Pause Time 10 minutes OK SAVE Send about services to people in terms. Feed Program AQUA MEDIC

Program AQUA MEDIC Tap mode blow or twice any phone on time, click head to eOR STOP MRI FID AQUA MEDIC

AQO_OF01FA 82 30 100 返回 Please select the following of program choice: Feed Program AQUA MEDIC

Menu Rename > Delete Device >

Fig. 12: Rinomina pompe (Rename) o cancella (Delete Device).

My Devices My Groups No groups Add Exit Add My Devices My Sports Options AQUA MEDIC

Login AQUA A MEDHE Create your account Enter your email Create password Define password Enter your email Enter your password LOGIN CREATE EXIT RENEER BY HOME WORK

9 W 79% 95%

Reset your password Enter your email and can't need you a link to reset your password. NEW! EXIT EXIT OF FREE

Add device AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

AQO.OFDIFA 82 30 100 α Please select. Make up your program needs. Food Program AQUA MEDIC

Program AQUA MEDIC Tap inside cost or tap any price on time circle bevel to exit STOP AUTO FISH AQUA MEDIC

AQO_0FD1FA 82 30 100 OK Please select a client of program status. Feed Program AQUA/MEDIC

Menu Rename > Delete Device >

My Devices My Groups No groups ADD EXIT Aqua MEDIC

Login AQUA.MEDHE Create your account Enter your email Create password Confirm password Enter your email Enter your password LOGIN CREATE EXIT REDACTOR FOR ACCOUNT PRINT CHANGES LINK IN YOUR NAME CREATE

Reset your password Enter your email and we'll send you a link To reset your password. Enter your email address RESET EXIT EXIT OR EXIT

Add device → AP Network Press the power button for 5 seconds Until the red and green lights blinking alternately. Device is in smart configuration mode. CANCEL NEXT

AQD_QFDIFA OZ 30 100 OK Please select: Holdings as preferred choice Feed Program AQUA MEDIC

AQO, OFD1FA Feed Turn on Feed Feed Pause Time 10 minutes > OK Start Printed with a copy of a print sheet. Feed Image um AQUA MEDIC

AQD_OF01FA 82 30 100 PK Planned tested: A#e#au in program media. Feed Program AQUA MEDIC

Program AQUA MEDIC Tap inside exon or tap any place on-time phone twice to add. STOP AIDS RED AQUA MEDIC

Menu Rename > Delete Device >

My Devices AQE.CVA99 AQA MEDIC

My Devices My Groups No groups Add Exit AQUA MEDIC