FTXK50AV1BS - Air Conditioning DAIKIN - Free user manual and instructions

USER MANUAL FTXK50AV1BS DAIKIN

Operating Manual Handset Wireless

English

1. Match the ring at the end of the ball chain with the screw hole on the back of the remote controller and secure it with the screw.
2. Attach the holder and the ball chain as above at the position where signals from the remote controller can be received easily.
3. Pass the ball chain through the back of the holder and match the ring at the end of the ball chain to the upper hole of the holder. Fix the holder to the wall by putting through 2 screws across it.

Installation

2) Quantity: 2 pieces

Disposal Requirements

The batteries supplied with the controller are marked with this symbol.

This means that the batteries shall not be mixed with unsorted household waste.

If a chemical symbol is printed beneath the symbol, this chemical symbol means that the battery contains a heavy metal above a certain concentration.

Possible chemical symbols are:

■Pb:lead（-0.004%）

Waste batteries must be treated at a specialized treatment facility for re-use. By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health. Please contact your local authority for more information.

File

1)Type:AAA.R03

2) Quantite: 2 pioces

Instructions d'effimination

Haatapev, KOTOPB IXDGRT BOMNEKT NOCTAKK KOHTPONPAHAAEHN DAHHA CMM03.

30103HJHHTNATGAPEN HBNH2YTHINMPOHHTBMECTIE CCHCPTPOHPHHVMA 60103HJHHTNATGAPEN HBNH2YTHINMPOHHTBMECTIE CCHCPTPOHPHHVMA

EENHINHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHINCHIN CHENPHENCCHECNHNNNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHN

■Pb:CBHHeH[>0.04%]

YNYHNNNNEBMBBNTAePENPAEBAeTACNAeCNHNNHNOpePABATBAAUOMNPANDNTNPNKNGTPOHPONLONOBHHO.ObcNnnePNOBNLYHOYN3AaIO.BNDNOKETNEpNDOTPATNTNtNEHUNBHeERATNMBHeNOCNCTDBNIAIROPKyHbNcpeD3N 130C26PbNDB.140NtNTHENHNNINNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN

Pil

11Tig:AAA803

2) Miktar: 2 adet

1. Transmission source

• The source where the signal will be transmitted.

2. Signal transmission indication

• Blink to confirm that the last setting has been transmitted to the unit.

3. "ON/OFF" Button

• Press once to start the air conditioner unit.
• Press again to stop the unit.

4. Fan speed selection

• Pressing button continuously will toggle the fan speed in the following order:

Low Med High Auto

• Stop pressing when the desired fan speed appears on the display screen.

5. Operation mode

• Press the MODE button to select the type of operating mode.

• For cooling only unit, the available modes are: COOL (※), DRY (□) and FAN (△).

• For heat pump unit, the available modes are: AUTO (A), COOL (), DRY (D), FAN (), and HEAT (*).

• The AUTO (A) mode is unavailable for chilled water system except 4-pipe system.

6. Automatic air swing

• Press the SWING to activate the automatic air swing function.
• To distribute the air to a specific direction, press the SWING (按钮) button and wait until the louver move to the desired direction and press the button once again.

Swing mode selection method (model dependent)

• Press SWING (按钮) button for 4 seconds to enter field setting mode. While in field setting mode, it will only show SWING MODE (按钮).

• Press temperature and button to select SWING MODE ( 12 ) rotation from Swing Mode 1 to Swing Mode 3.

• There are 3 different SWING MODE, which are:

Swing mode 1 Swing mode 2 Swing mode 3 SWING MODE will not activate unless SWING is activated.

Swing is indicated by the logo:

• If no mode changes within 4 seconds, unit will operate according to the selected SWING MODE (3).

7. Powerful & Powerful+ function

• Press for fast cooling or heating operation.

Fan speed turn to maximum speed.

• Press again for smart cooling or heating operation.

• Fan speed turn to maximum speed and louver will be adjusted as according to the judgement of sense function.

• Press again to deactivate the function.

• Available under HEAT and COOL modes only.

• Any change of fan speed will deactivate this function.

8. OFF timer setting

• Press the OFF TIMER button will activate the off timer function.

• Set the desired off time by pressing the OFF TIMER button continuously.

• Press the CANCEL button to cancel the off timer setting.

9. Quiet function (model dependent)

Pre for quiet operation.

Fan speed turn to minimum speed.

• Press again to deactivate the function.

• Available under HEAT and COOL modes only.

• Any change of fan speed will deactivate this function.

10. Clock time setting

• Press and hold CLOCK button to set the clock time.

11. ON timer setting

• Press the ON TIMER button will activate the on timer function.

• Set the desired on time by pressing the ON TIMER button continuously. If the timer is set to 7.30am, the air conditioner will turn on at 7.30am sharp.

• Press the CANCEL button to cancel the on timer setting.

12. Sleep mode setting

• Press hheton will activate the sleep mode function.

• This is an energy saving option. When the unit is operating under cooling mode, the set temperature is increased by 0.5^ after

the first half an hour, another 0.5^ after the second half an hour and 1^ after the following 1 hour.

• When the unit is operating under heating mode, the set temperature is decreased by 1^ after the first half an hour, another 1^ after the second half an hour and 1^ after the following 1 hour.

• This function is available under COOL, HEAT and AUTO mode.

13. Temperature setting

• To set the desired room temperature, press the set temperature.

or button to increase or decrease

• The temperature setting range is from 16^ to 30^ (Optional setting 20^ to 30^ ).

• Press both buttons

and simultaneously to toggle from ^ C to ^ setting.

14. ECO+ function

foss eco-friendly mode cooling or heating operation.

• Set temperature automatically adjust to eco-friendly level.

• Press again to deactivate the function.

• Available under HEAT and COOL modes only.

15. LED function

• Pressturn on/off the light on ceiling cassette unit.
• Continuosi press for 5 seconds to turn on/off the LED display on wall mount.
• Available under HEAT, COOL, DRY, FAN and AUTO modes only.

16. Sense function

• Press intelligent eco cooling, heating or dry mode operation.

• Temperature display on wireless handset will automatically display 24^ as the eco-friendly level.

• Press again to deactivate the function.

• Available under HEAT, COOL and DRY mode.

FAULT DIAGNOSIS BY REMOTE CONTROLLER

The temperature display sections indicate corresponding codes.

1. When the ON TIMER CANCEL button or OFF TIMER CANCEL button is held down for 5 seconds, a “#” indication flashes on the temperature display section.

1. Press the ON TIMER CANCEL button or OFF TIMER CANCEL button repeatedly until a continuous beep is produced.

2. The code indication changes as shown below, and notifies with a long beep.

ERROR CODE MEANING

00 NORMAL

A1 INDOOR PCB ERROR

A3 DRAIN PUMP ABNORMAL

A5 ANTIFREEZE (COOLING)/HEAT EXCHANGER OVERHEAT (HEATING)

A6 INDOOR FAN MOTOR ABNORMAL

AH ELECTRICAL AIR CLEANER ABNORMAL

C4 INDOOR HEAT EXCHANGER (1) THERMISTOR SHORT/OPEN

C5 INDOOR HEAT EXCHANGER (2) THERMISTOR SHORT/OPEN

C7 LOVER LIMIT SWITCH ERROR

C9 INDOOR ROOM THERMISTOR SHORT/OPEN

E1 OUTDOOR PCB ERROR

E3 HIGH PRESSURE PROTECTION

E4 LOW PRESSURE PROTECTION

E5 COMPRESSOR MOTOR LOCK/COMPRESSOR OVERLOADED

E6 COMPRESSOR START-UP ERROR

E7 OUTDOOR DC FAN MOTOR LOCK

E8 AC INPUT OVER CURRENT

E9 EXV ERROR

EA 4 WAY VALVE ERROR

F3 DISCHARGE PIPE OVERHEAT

F6 HEAT EXCHANGER OVERHEAT

HO COMPRESSOR SENSOR SYSTEM ERROR

H3 HIGH PRESSURE SWITCH ERROR

H6 COMPRESSOR FEEDBACK DETECTION ERROR

H7 FAN MOTOR OVERLOADED/OVERCURRENT/SENSOR ABNORMAL

H8 AC CURRENT SENSOR ERROR

ERROR CODE	MEANING
H9 OUTDOOR AIR THERMISTOR SHORT/OPEN
J1 PRESSURE SENSOR ERROR
J3 COMPRESSOR DISCHARGE PIPE THERMISTOR SHORT/OPEN/MISPLACED
J5 SUCTION PIPE THERMISTOR SHORT/OPEN
J6 OUTDOOR HEAT EXCHANGER THERMISTOR SHORT/OPEN
J7 SUBCOOLING HEAT EXCHANGER THERMISTOR SHORT/OPEN
J8 LIQUID PIPE THERMISTOR SHORT/OPEN
J9 GAS PIPE THERMISTOR SHORT/OPEN
L1 INVERTER OUTDOOR PCB ERROR
L3 OUTDOOR CONTROL BOX OVERHEAT
L4 HEAT SINK OVERHEAT
L5 IPM ERROR/IGBT ERROR
L8 INVERTER COMPRESSOR OVERCURRENT
L9 COMPRESSOR OVERCURRENT PREVENTION
LC COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND INVERTER PCB)
P1 OPEN PHASE OR VOLTAGE UNBALANCE
P4 HEAT SINK THERMISTOR SHORT/OPEN
PJ CAPACITY SETTING ERROR
U0 INSUFFICIENT GAS
U2 DC VOLTAGE OUT OF RANGE
U4 COMMUNICATION ERROR
U7 COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND IPM PCB)
UA INSTALLATION ERROR
UF	PIPING & WIRING INSTALLATION MISMATCH/WRONG WIRING/INSUFFICIENT GAS
UH ANTIFREEZE (OTHER ROOMS)

NOTE

1. A short beep and two consecutive beeps indicate non-corresponding codes.
2. To cancel the code display, hold the ON TIMER CANCEL button or OFF TIMER CANCEL button down for 5 seconds. The code display also cancel itself if the button is not pressed for 1 minute.

1. Source de transmission

3. Khonka "BKJI/BbIKJI" (ON/OFF)

Haxmte Odn pa3 nBkIIOHeHn KOHNIOHepa.
BHOBB haxMITE JIA OCTaHOBKMOyJIA.

4. BbI6Op ckOpocTn BeHTNJIATOPa

• Haxmte KhoNkyIJIa HepepbIBHOrO IepeKJIouEHHa CKOpocTn BEHTINrTopa B CJeDyIOUcEM nopAikke:

Hn3K CpeBbICoK ABO

7. MoUHOCTb N MOUHOCTb +ФунКцИA

HaXMMTe 6bIcTpO OxnaJdeHn nn onepaun oBorpeBa.
- YCTaHOBnTE MaKcImMaIbHyIO CKOpOcTb BeHTINrAToPA.
Haxmte eue pa3 nBkIOUeHn npOcecca oxnaXeHn nnHarpeBa.
- YCTaHOBtE MaKcMmaIbHyIO CKOpOCTb BEHTnIaTopa. XaJIIO3N 6ydyT OTpeRyIuPObaHbI B COOTBeTCTBmC NOKa3AHmN NaCCNBHOrO OyHKUIN DaTuHaKa.
-ДЯOTKNIOUeHnDAHHOуHKcHn HaxMITE 3Ty KONky eue pa3.
- Bo3MOxHbI TOnbKO npi peXImax HEAT (O60rPEB) n COOL (XoJIO).
- Dahnna cyhkuia OTKIOaETc npn 3MeHmN CKOpOCTn BpaueHn BeHTnIATopa.

8. YCTaHOBka BblKJIIOueHn TaIMepa

• Haxmte KhoNky OFF TIMER dIy 3ayncKa yHKuIN BbIKIOueHn TaMepa.
• YctahOBtE XeJaEMOE Bpem BBKJIHOeyHb6ecPpepbHBbIM HaxaTHeM KONKn OFF TIMER.
  HaXMMTe KhoNky CANCEL dIy OTMeHbI yCTaHOBKn BbIKNoUeHn TaMepa.

P.O.Box 18674, Galleries 4, 11th Floor, Downtown Jebel Ali, Dubai, UAE.

DAIKIN INDUSTRIES, LTD.

Head office: Umeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan

Tokyo office: JR Shinagawa East Bldg., 2-18-1, Konan, Minato-ku, Tokyo, 108-0075 Japan http://www.daikin.com/global/

Importer for Turkey

DAIKIN ISITMA ve SOGUTMA SISTEMLERI SAN TIC A.S.

Hurriyet Mahallesi Yakacik D-100 Kuzey Yanyol Caddesi No:49/1-2 Kartal - Istanbul

aLlgl a1s1s1s1g0s1c1s1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2a1g2

Joo Joo 00000000000000000000000000000000000000000000

DAIKIN INDUSTRIES, LTD.

Head office:

Umeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan

Tokyo office:

JR Shinagawa East Bldg., 2-18-1, Konan, Minato-ku, Tokyo, 108-0075 Japan http://www.daikin.com/global/

DAIKIN EUROPE N.V.

P.O.Box 18674, Galleries 4, 11th Floor, Downtown Jebel Ali, Dubai, UAE.

Importer for Turkey

DAIKIN ISITMA VE SOGUTMA SISTEMLERI SAN TIC A.S.

ab = 2

20 16 d y

(30

C 1

.°F a

ECO+

a

afo 1fofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofofo

a 1 jaa aaij aas

jaoiig JgX1 aclwJ 0a

aclwll a n d s r 1

1 1

.ajllj jacLwJ

HEAT.COOL

.AUTO

J

JLw,21 J

.1

A

aLwJLwJdoXc

.

"ON/OFF"

1ggl a.5o Jie jao 1g y

.

a>g-ol aCwJ

y

jLai 1le hwoo

aLl aJcIc aGall acsw gbi Ioc aagj

J

MODE

FAN 9 (D) DRY. (E) COOL:

.（DRY.(）COOL.(A) AUTO:

HEAT 9 FAN

-4pI 1A AUTO(A)

g

SWING

aJxLgIgSwING jz

s r 1000

（）

b g s 4 SWING

SWING MODE

SWING MODE 2g

3 1 1

SWING MODE 3

3 2 1

J SWING MODE 2 g

.SWING

：

J 4 JL

JSWING MODE

4j jaiil 8y

x

y

j 1

125j34

（>0.004%）：

y

Jusit duyu wuiy tae jyj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj yj

j111 1

aLwJy jzj y wIg y n c g 10

1

a

J 1

aIgG aIg oSnn Ioo

aJlalwuwjzjjagjg josogagai aolllglogolll JldcJlalwuwjzjj

Jolalj 2g 2a 100

J 1c

(AAA.R03)

J = ( k - 1) ( k + 1) = 0

SLWUaCLw