K 5 Classic - Pressure washer Kärcher - Free user manual and instructions

USER MANUAL K 5 Classic Kärcher

Yellow Kärcher water purifier with black hose and hose assembly (no visible text or symbols)

Deutsch 5

English 10

Français 15

Italiano 20

Español 25

Português 30

Nederlands 35

Türkçe 39

Svenska 44

Suomi 49

Norsk 53

Dansk 58

Eesti 62

Latviešu 67

Lietuviškai 71

Polski 76

Magyar 81

Čeština 86

Slovenčina 91

Slovenščina 96

Română 100

Hrvatski 105

Srpski 110

Ελληνικά 115

Русский 120

Українська 125

Қазақша 130

Български 135

العربيya 141

A

Labeled diagram of a Kriecher water purifier with numbered parts and component annotations

B b a

c a b c CLICK

D a CLICK b

E CLICK a b

F a b

Close-up of a gas washing machine connected to a bottle with a red downward arrow indicating fluid flow (no text or symbols visible)

Diagram showing a yellow and gray plastic clip with a lock mechanism, alongside a close-up of a circular component with red arrows indicating rotation (no text or symbols present)

Illustration of a car tire repair procedure showing tool insertion, wheel rim, and water droplets (no text or symbols)

Diagram illustrating a car tire repair process with a red arrow indicating the need for liquid discharge, alongside a water tap and battery.

Inhalt

KÄRCHER Home & Garden App 5

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Technische Daten

Symbols on the device 10

Intended use.... 10

Environmental protection.... 10

Accessories and spare parts 10

Scope of delivery.... 10

Device description 10

Mounting.... 11

Initial startup 11

Operation.... 11

Transport 12

Storage.... 12

Care and service 13

Troubleshooting guide.... 13

Warranty.... 13

Declaration of Conformity 13

Technical data 14

KÄRCHER Home & Garden App

With the KÄRCHER Home & Garden app, you benefit from the following advantages when using your device:

• Application tips & expert knowledge
- Product information, overview of accessories and operating instructions
• Support and service contact
- Online shop - exclusive offers and much more Download the KÄRCHER Home & Garden app from your app store and conveniently register your product.

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first

time. Proceed accordingly.

Keep both books for future reference or for future owners.

Safety devices

⚠ WARNING

Danger of injury!

Serious injuries due to missing, modified or ineffective safety devices.

Do not bypass or remove the safety devices and do not render them ineffective. Safety devices are provided for your own protection.

Power switch

The power switch prevents unintentional operation of the device.

High-pressure gun lock

The lock locks the lever of the high-pressure gun and prevents the device from starting unintentionally.

Auto-stop function

If the lever of the high-pressure gun is released, the pressure switch turns off the pump and the high-pressure jet stops. The pump switches on again when the lever is pressed.

Symbols on the device

Do not aim the high-pressure jet may at persons, animals, live electrical equipment or the device itself.

Protect the device against frost.

The device may not be connected to the public drinking water network.

Intended use

Use the high-pressure cleaner in private households only.

The high-pressure cleaner is intended for cleaning machines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can

pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.

Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., may only be performed at washing stations with an oil separator.

Working with detergents may only be performed on watertight surfaces with connection to the waste water sewage system. Do not allow detergent to enter waterways or the soil.

Extraction of water from public waterways is not permitted in some countries.

Notes on the content materials (REACH)

Current information on content materials can be found at: www.kaercher.de/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Device description

For the figures, please refer to the graphics page Illustration A

① Transport wheel
② Storage for high-pressure gun
③ Storage for spray lance

④ Storage for high-pressure hose / mains connection cable
⑤ Spray lance dirt grinder for stubborn soiling
⑥ Vario Power spray lance for common cleaning tasks
The working pressure can be continuously increased from "SOFT" to "HARD". To adjust the working pressure, release the trigger gun lever and turn the spray lance to the desired position.

⑦ High-pressure gun

⑧ Release button

⑨ High-pressure gun lever

⑩ High-pressure gun lock

⑪ High-pressure hose

⑫ Mains connection cable with mains plug

⑬ Trigger "0/OFF" / "I/ON"

14 Transport handle, telescoping

⑮ High-pressure connection

⑯ Type plate

⑰Water connection with integrated sieve

⑱ Detergent suction hose

⑲ Coupling for the water connection

20* Garden hose (fabric reinforced, diameter at least 1/2 inch (13 mm), length at least 7.5 m, with commercially available quick coupling)

21** KÄRCHER suction hose

* additionally required

** optionally available

Mounting

For the figures, please refer to the graphics page.

Fit the supplied loose parts onto the device before starting up the device.

Installing the water connection coupling

1. Screw the water connection coupling onto the water connection on the device.

Illustration B

Initial startup

1. Place the device on a level surface.
2. Unwind the high-pressure hose and eliminate any loops and twists.

3. Connect the high-pressure hose to the device. a Pull up the clamp on the coupling. b Insert the high-pressure hose into the coupling. c Press down the clamp on the coupling. Illustration C

4. Insert the high-pressure hose into the high-pressure gun until it audibly clicks into place.

Note

Take care to ensure the correct alignment of the nipple. Illustration D

1. Check for a secure connection by pulling on the high-pressure hose.

2. Plug the mains plug into a mains socket.

Note

Take care not to exceed the maximum permissible mains impedance at the electrical connection point (see Technical data). Otherwise, other electrical loads may be affected when the device is switched on (such as a flickering lamp).

Contact your electricity supplier in the case of any uncertainties regarding the mains grid impedance at your electrical connection point.

Water supply

For the connection values, see the type plate or chapter Technical data.

Observe the water distribution company regulations.

ATTENTION

Damage through contaminated water

Contamination in the water can damage the pump and the accessories.

KÄRCHER recommends using the KÄRCHER water filter for protection(special accessory, order number 4.730-059).

Connection to the water line

ATTENTION

Risk of damage when using hose couplings made of brass with AquaStop function from third-party suppliers.

Damage to the high-pressure pump.

Only use hose couplings with/without AquaStop function from Kärcher, hose couplings without AquaStop function or hose couplings made of plastic with AquaStop function from third-party suppliers.

1. Plug the garden hose onto the water connection coupling.

Illustration E

1. Connect the garden hose to the water line.

2. Open the water tap completely.

Suck water from open containers

This high-pressure cleaner with the KÄRCHER suction hose is suitable for sucking in surface water, e.g. from water butts or ponds (for maximum suction height, see Technical data).

1. Unscrew the coupling on the water connection.

2. Fill the suction hose with water.

3. Screw the suction hose onto the water connection of the device and hang it in a water source (e.g. rain barrel).

Vent the device

1. Switch the device on "I/ON".
2. Unlock the lever of the high-pressure gun.
3. Press the lever of the high-pressure gun. The device switches on.
4. Allow the device for run a maximum of 2 minutes until the water escaping from the high-pressure gun is free of air bubbles.
5. Release the lever of the high-pressure gun.
6. Lock the lever of the high-pressure gun.

Operation

ATTENTION

Dry running of pump

Damage to the device

If the device does not build up any pressure within 2 minutes, switch off the device and proceed according to the instructions in chapter Troubleshooting guide.

High-pressure operation

ATTENTION

Damage to painted or sensitive surfaces

Surfaces can be damaged when the jet is too close to the surface or an unsuitable spray lance is used.

Maintain a minimum spray distance of 30 cm when cleaning painted surfaces.

Do not clean car tyres, paint or sensitive surfaces such as wood with the dirt blaster.

1. Insert a spray lance into the high-pressure gun and lock it by turning it 90°.

Illustration F

1. Switch the device on ("I/ON").

2. Unlock the lever of the high-pressure gun.

3. Press the lever of the high-pressure gun. The device switches on.

Operation with detergent

⚠️DANGER

Risk of injury from detergent

Serious damage to health due to improper use of detergents.

Observe the detergent manufacturer's safety data sheet.

Wear the prescribed personal protective gear.

Note

KÄRCHER detergents ensure fault-free operation. Ask us for a consultation, request our catalog or our detergent information sheets.

Note

Detergent can only be mixed into the jet at low pressure.

1. Pull the detergent suction hose out of the casing to the desired length.

Illustration G

1. Hang the detergent suction hose in a container with detergent solution.

2. Disconnect the spray lance from the high-pressure gun and work only with the high-pressure gun. The detergent solution is mixed with the water jet during operation.

Recommended cleaning method

1. Spray the detergent sparingly on the dry surface and let it work for a while (do not let it dry).

2. Rinse off the loosened dirt with the high-pressure jet.

After operation with detergent

1. Flush the device with clear water for approx. 30 seconds.

Interrupting operation

1. Release the lever of the high-pressure gun. The device switches off when the lever is released. The high pressure in the system is retained.

2. Lock the lever of the high-pressure gun. Illustration H

3. Switch the device off "0/OFF" during work breaks longer than 5 minutes.

Ending operation

△CAUTION

Danger of injury!

Injuries due to uncontrolled water escaping under high pressure.

Only disconnect the high-pressure hose from the high-pressure gun or the device if there is no pressure in the system.

1. Release the lever of the high-pressure gun.

2. Close the water tap.

3. Press the lever of the high-pressure gun for 30 seconds.

The pressure in the system is released.

1. Release the lever of the high-pressure gun.

2. Lock the lever of the high-pressure gun.

3. Switch off the device "0/OFF".

4. Disconnect the device from the water supply.

5. Pull the mains plug out of the outlet.

Transport

△CAUTION

Risk of injury or damage due to the weight of the device!

Injury and damage.

Be aware of the weight of the device during transport and storage.

Pulling device

1. Pull out the transport handle until it audibly engages.

2. Pull the device by the transport handle.

Transporting the device in a vehicle

1. Secure the device against slipping and tipping over.

Storage

△CAUTION

Risk of injury or damage due to the weight of the device!

Injury and damage.

Be aware of the weight of the device during transport and storage.

Storing the device

1. Place the device on a level surface.

2. Press the disconnect button on the high-pressure gun and disconnect the high-pressure hose from the high-pressure gun.

3. Disconnect the spray lance from the high-pressure gun.

4. Stow both spray lances and the high-pressure gun in the appropriate storage options.

5. Disconnect the high-pressure hose from the device.

6. Store the high-pressure hose on the device.

7. Stow the mains connection cable on the device.

Observe the additional notes before storing the device for a longer period of time, see chapter Care and service.

Frost protection

ATTENTION

Risk of damage!

Damage to the device and accessories due to freezing water.

Completely empty the device and accessories after each use.

Protect the device and accessories from temperatures below or equal to 0 °C (32 °F).

1. Disconnect the water supply from the device.

2. Remove the high-pressure hose from the device.

3. Switch on the device "I/ON".

4. Wait for a maximum of 1 minute until no more water escapes from the high-pressure connection.

5. Switch off the device "0/OFF".

6. Store the device and accessories in a frost-protected room.

Care and service

⚠️DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

The device is maintenance-free, i.e. you do not need to perform any maintenance work.

Clean the sieve in the water connection

ATTENTION

Damaged sieve in the water connection

Damage to the device through contaminated water Check the sieve for damage before inserting it in the water connection.

If necessary, clean the sieve in the water connection.

1. Remove the coupling from the water connection.

2. Pull out the sieve with a pair of flat pliers.

3. Clean the sieve under running water.

Illustration I

1. Insert the sieve into the water connection.

2. Screw the coupling onto the water connection.

Cleaning the detergent filter

Clean the detergent filter before prolonged storage.

1. Remove the filter from the detergent suction hose.

2. Clean the filter under running water.

Illustration J

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.

⚠️DANGER

Danger of death!

Fatal injuries due to electric shock when touching live parts.

Do not touch any live parts.

Switch off the device.

Pull the mains plug out of the mains socket.

Device not running

1. Press the lever of the high-pressure gun. The device switches on.

2. Check that the voltage specified on the type plate corresponds to the voltage of the power source.

3. Check the mains connection cable for damage.

Device does not reach required pressure

The water supply is too low.

1. Open the water tap fully.

2. Check the water inlet for an adequate flow rate.

3. Check the setting at the spray lance.

4. Check that the maximum suction height is not exceeded.

The sieve in the water connection is dirty.

1. Pull the sieve in the water connection out using flat pliers.

2. Clean the sieve under running water. Illustration I

Air is in the device.

1. Vent the device:

a Switch on the device without a connected spray lance for a maximum of 2 minutes.

b Press the high-pressure gun and wait until the water escaping from the high-pressure gun is free of air bubbles.

c Connect the spray lance.

Strong pressure fluctuations

1. Cleaning the high-pressure nozzle:

a Remove contamination from the nozzle drill with a needle.

b Rinse the high-pressure nozzle with water from the front.

1. Check the water supply volume.

Device leaking

1. The device leaks a small amount for technical reasons. If the leak is severe, request authorised Customer Service.

The detergent is not sucked in

A spray lance is mounted on the high-pressure gun.

1. Detach the spray lance and operate using only the high-pressure gun.

The detergent hose is kinked, blocked or leaking.

1. Route the detergent hose without kinks, clean it or replace it.

The detergent filter is blocked.

1. Clean the detergent filter, see Cleaning the detergent filter.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)

Further warranty information (if available) can be found in the service area of your local Kärcher website under "Downloads".

Declaration of Conformity

EU Declaration of Conformity

We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

Product: High-pressure cleaner

Type: K 5 Classic

Directives and Regulations

2000/14/EC

2006/42/EC (+2009/127/EC)

2011/65/EU

2014/30/EU

Harmonised standards used

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN IEC 63000: 2018

Conformity evaluation procedure used

2000/14/EC: Annex V

Sound power level dB(A)

K 5, K 5 Pure, K6

Measured: 89

Guaranteed: 92

K 5 Classic

Measured: 89

Guaranteed: 92

Name and address

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

The undersigned act on behalf of and with the authority of the Board of Directors.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

UK Declaration of Conformity

We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

Product: High-pressure cleaner

Type: K 5 Classic

Directives and Regulations

S.I. 2001/1701 (as amended)

S.I. 2008/1597 (as amended)

S.I. 2012/3032 (as amended)

S.I. 2016/1091 (as amended)

Designated standards used

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN IEC 63000: 2018

Applied conformity assessment procedure

S.I. 2001/1701 (as amended): Schedule 8

Sound power level dB(A)

K 5, K 5 Pure, K6

Measured: 89

Guaranteed: 92

K 5 Classic

Measured: 89

Guaranteed: 92

Name and address

Documentation supervisor:

S. Reisen

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

The undersigned act on behalf of and with the authority of the Board of Directors.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

Technical data

		K 5Classic
Electrical connection
Voltage	V
Phase ~ 1
Frequency Hz 50
Maximum permissible mains grid impedance	Ω 0,34 + j0,21
Current consumption A 8
Protection type IPX5
Protection class II
Power protection (slow-blowing) A 10
Water connection
Feed pressure (max.) MPa 1,2
Input temperature (max.) °C 40
Input amount (min.)	l/min	10
Suction height (max.)	m	0,5
Device performance data
Operating pressure	MPa 12,0
Max. permissible pressure MPa 14,5
Water flow rate	l/min	6,7
Maximum flow rate	l/min	8,3
Detergent flow rate	l/min	0,3
High-pressure gun recoil force	N 17
Dimensions and weights
Typical operating weight	kg	7,0
Length	mm	281
Width	mm	274
Amount	mm	461
Values determined in accordance with EN 60335-2-79
Hand-arm vibration value	m/s2	2,3
Uncertainty K	m/s2	0,7
Sound level LpA	dB(A)	77
Uncertainty KpA	dB(A)	3
Sound power level LWA + Uncer-tainty KWA	dB(A)	92

Subject to technical modifications.

Contenu

Application KÄRCHER Home & Garden 15

2006/42/CE (+2009/127/CE)

2011/65/UE

2014/30/UE

71364 Winnenden (Germany)

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, le 01/08/2023/10/01

71364 Winnenden (Germany)

71364 Winnenden (Germania)

Tel.: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 01/08/2023/10/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Dati tecnici

2006/42/CE (+2009/127/CE)

2011/65/UE

2014/30/UE

71364 Winnenden (Germany)

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01/08/2023/10/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Datos técnicos

2006/42/CE (+2009/127/CE)

2011/65/UE

2014/30/UE

71364 Winnenden (Germany)

Telephone: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01/08/2023/10/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Technische gegevens

2006/42/AT (+2009/127/AT)

2011/65/AB

2014/30/AB

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Telefon: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.08.2023/10/01

D-71364 Winnenden (Germany)

Tfn: [phone]

Fax: [phone]

Tekniska data

71364 Winnenden (Germany)

Puhelin: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 1.8.2023/10/01

71364 Winnenden (Germany)

Puh.: [phone]

2006/42/EF (+2009/127/EF)

2011/65/EU

2014/30/EU

Anvendte harmoniserte standarder

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN IEC 63000: 2018

2000/14/EF: Vedlegg V

Lydeffektnivå dB(A)

K 5, K 5 Pure, K6

Målt: 89

Garantert: 92

K 5 Classic

Målt: 89

Garantert: 92

Navn og adresse

71364 Winnenden (Germany)

Telefon: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tlf.: [phone]

2006/42/EF (+2009/127/EF)

2011/65/EU

2014/30/EU

71364 Winnenden (Germany)

Telefon: [phone]

Fax: [phone]

Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tlf.: [phone]

Fax: [phone]

Tekniske data

Toode: Körgsurvepesur

Tüüp: K 5 Classic

2006/42/EÜ (+2009/127/EÜ)

2011/65/EL

2014/30/EL

71364 Winnenden (Germany)

Tel: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tel: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Vinendene (Winnenden), 01.08.2023/10/01.

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

2006/42/WE (+2009/127/WE)

2011/65/UE

2014/30/UE

71364 Winnenden (Germany)

Telefon: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.08.2023/10/01 r.

71364 Winnenden (Germany)

Tel.: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

2006/42/ES (+2009/127/ES)

2011/65/EU

2014/30/EU

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

2006/42/ES (+2009/127/ES)

2011/65/EÚ

2014/30/EÚ

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 01.08.2023/10/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Technické údaje

K5

Classic

Elektrická prípojka

Napätie	V
Fáza ~ 1
Frekvencia Hz 50
Maximálne povolená impedancia siete	0,34 + j0,21

Odber prúdu A 8

Stupeň ochrany IPX5

Trieda ochrany II

Zaistenie siete (zotrvačné) A 10

Prípojka vody

2006/42/ES (+2009/127/ES)

2011/65/EU

2014/30/EU

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 1. 8. 2023/10/01

Podpisniki ravnajo po navodilih in s pooblastilom upra- ve.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germania)

Telefon: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germania)

Tel.: [phone]

Fax: [phone]

Date tehnice

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2014/30/EU

71364 Winnenden (Germany)

Tel.: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.08.2023/10/01.

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2014/30/EU

Primenjene harmonizovane norme

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN IEC 63000: 2018

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

Potpisnici deluju po nalogu i uz punomoć upravnog odbora.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

71364 Winnenden (Germany)

Tηλ.: [phone]

Φαξ: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2023/10/01/08/01

71364 Winnenden (Germany)

Tηλ.: [phone]

Φαξ: [phone]

Τεχνικά στοιχεία

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

71364 Winnenden (Germany)

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Виненден, 2023/10/01/08/01

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

Технически данни

QR code image containing encoded data, no visible human-readable text

Scan QR Code for download and easy product registration in Home & Garden App or website.

karcher.com/register

KARCHER BRING BACK THE WOW LIKE AN EXPERT. CREATE ASSIGNS Logos | 🎯 G CONTINUING AS SLIGHT LIFE HODS AND CABBEGES FOR 2019.16.2019 AND ECONOMICS!

EN – Download the Home & Garden App to register your device for full support in cleaning.

■ Control of smart products
■ Application tips & expert knowledge
■ Product information, overview of accessories and operating instructions
■ Support and service contact
■ Online shop – exclusive offers and much more

karcher.com/dealersearch

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28-40

71364 Winnenden (Germany)