HWW 1000 VF - Water pump Güde - Free user manual and instructions

USER MANUAL HWW 1000 VF Güde

GB Translation of the original instructions

Blue industrial air purifier with black control panel and attached pump (no visible text or symbols)

HWW 1000 VF

72520

LIEFERUMFANG | DELIVERED ITEMS | ARTICLES DÉLIVRÉS | VOLUME DELLA FORNITURA | LEVERINGSOMVANG | OBJEM DODÁVKY | ROZSAH DODÁVKY | SZÁLLÍTÁSI TERJEDELEM | OBSEG DOBAVE | OPSEG ISPORUKE | ОБЕМ НА ДОСТАВКАТА | VOLUMUL LIVRĂRII | OPSEG ISPORUKE

Blue industrial air purifier with black control panel and water tank (no visible text or symbols)

HWW 1000 VF

72520

ENGLISH Please read the instructions carefully before starting the machine.

Illustration of a blue industrial pump with a black motor and downward arrow indicating motion (no text or symbols)

2

Mechanical assembly diagram showing a motor with attached components and directional arrows indicating motion (no text or symbols)

3

Illustration of a blue electric motor with cooling fins and a thermometer above it (no text or symbols)

4

DE BETRIEB HU ÜZEMELTETÉS

GB OPERATION SI DELOVANJE

FR FONCTIONNEMENT HR RAD

IT ESERCIZIO BG PABOTA

NL GEBRUIK RO FUNCTIONARE

CZ PROVOZ BA

SK PREVÁDZKA

START STOP

5

DE WARTUNG HU KARBANTARTÁS

GB MAINTENANCE	SI VZDRŽEVANJE
FR ENTRETIEN	HR ODRŽAVANJE
IT MANUTENZIONE	BG ПОДДРЪЖКА
NL ONDERHOUD	RO ÎNTRETINERE
CZ ÚDRŽBA BA ODRŽAVANJE
SK ÚDRZBA

Blue industrial pump with a black wrench above it, no visible text or symbols

7

DE TRANSPORT / AUFBEWAHRUNG HU SZÁLLÍTÁS / TÁROLÁS

GB	TRANSPORT / STORAGE	SI	TRANSPORT / SHRANJEVANJE
FR	TRANSPORT / STOCKAGE	HR	PRIJEVOZ / USKLADIŠTENJE
IT	TRASPORTO / STOCCAGGIO	BG	TPAHCПОРТИРАНЕ / СЪХРАНЕНИЕ
NL	TRANSPORT / BEWARING	RO	TRANSPORT / DEPOZITARE
CZ	PŘEPRAVA / ULOŽENÍ	BA	PREVOZ / USKLADIŠTENJE
SK	TRANSPORT / ULOŽENIE

Silhouette of a person walking through a doorway with a checkmark symbol (no text or symbols present)

9

	DE INBETRIEBNAHME HU ÜZEMBE HELYEZÉS
	GB STARTING-UP THE MACHINE SI UVEDBA V POGON
	FR MISE EN SERVICE HR PUŠTANJE U RAD
	IT MESSA IN FUNZIONE BG ПУСКАНЕ В ДЕЙСТВИЕ
	NL INBEDRIJFSTELLING RO PUNEREA İN FUNCȚIUNE
	CZ UVEDENÍ DO PROVOZU BA PUŠTANJE U RAD
	SK UVEDENIE DO PREVÁDZKY

HWW 1000 VF

> 0° | < 40°

√ min. 400 mm

Diagram illustrating a mechanical system with warning symbols and directional arrows, showing components like a pump and water tank.

DE	ANSCHLUSS	HU	FESZÜLTSÉG
GB	SERVICE CONNECTION	SI	PRIKLJUČEK
FR	ALIMENTATION	HR	PRIKLJUČAK
IT	ALLACCIAMENTO	BG	ПРИСЬЕДИНЕНИЕ
NL	AANSLUITING	RO	RACORD
CZ	PŘÍPOJKA	BA	PRIKLJUČAK
SK	PRÍPOJKA

HWW 1000 VF

A B

TIP KA 4 P / 94440 KA 7 P / 94441

1 A + B PTFE

2 A

Illustration of a blue and black electric pump connected to a green watering can, with a pipe outlet and valve mechanism (no text or symbols)

Illustration of a blue electric pump connected to hoses with a valve, showing mechanical components and fluid flow direction (no text or symbols)

Blue electric motor with heat exchanger and thermometer, no visible text or symbols

! START ✓

Illustration of a blue electric pump connected to a wall-mounted device with a black faucet, no text or symbols present.

GB The pump must not in any case run without fillings.

Diagram illustrating a water pump installation and its internal structure with labeled components and directional arrows.

START STOP

DE BETRIEB HU ÜZEMELTETÉS

GB OPERATION SI DELOVANJE

FR FONCTIONNEMENT HR RAD

IT ESERCIZIO BG PABOTA

NL GEBRUIK RO FUNCTIONARE

CZ PROVOZ BA

RAD

SK PREVÁDZKA

HWW 1000 VF

Illustration of a blue pressure pump connected to a water tank with a water drop, no text or symbols present

1 ON I

Illustration of a faucet with water droplets falling, no text or symbols present

3 AUTO-START bar 1,5 bar

Simple black faucet icon with a circular arrow above it, no text or symbols present

5 AUTO-STOP bar 3,0 bar

Close-up of a blue industrial machine with a red label and arrow pointing to the front panel (no readable text or symbols)

DE WARTUNG HU KARBANTARTÁS

GB MAINTENANCE SI VZDRŽEVANJE

FR ENTRETIEN HR ODRŽAVANJE

IT MANUTENZIONE BG ПОДДРЬЖКА

NL ONDERHOUD RO ÎNTRETINERE

CZ ÚDRŽBA BA ODRŽAVANJE

SK ÚDRZBA

Illustration of a blue electric pump with a black handle and white shaft, accompanied by a black wrench above it (no text or symbols)

HWW 1000 VF

Close-up of a blue electric motor with internal components and a circular component, no visible text or symbols

Close-up of a blue electric shaver with a cylindrical component inserted, showing internal components and a directional arrow (no text or symbols)

3

DE WARTUNG HU KARBANTARTÁSGB MAINTENANCE SI VZDRŽEVANJEFR ENTRETIEN HR ODRŽAVANJEIT MANUTENZIONE BG ПОДДРЪЖКАNL ONDERHOUD RO ÎNTRETINERECZ ÚDRŽBA BA ODRŽAVANJESK ÚDRZBA

HWW 1000 VF

Close-up of a blue industrial power saw with a black handle and label '1' and '0' (no readable text or symbols beyond labels)

Illustration of a blue pressure pump connected to a water tank with a faucet, showing fluid flow and component placement (no text or symbols)

Blue industrial machine component with attached piping and a circular arrow indicating rotation (no text or symbols)

Illustration of a blue pressure vessel connected to a spring scale, with a stand and pressure gauge nearby (no text or symbols)

5 1,5 - 1,8 bar

Blue industrial machine component with mechanical parts and a circular arrow indicating rotation (no text or symbols)

DE	TRANSPORT / AUFBEWAHRUNG	HU	SZÁLLÍTÁS / TÁROLÁS
GB	TRANSPORT / STORAGE	SI	TRANSPORT / SHRANJEVANJE
FR	TRANSPORT / STOCKAGE	HR	PRIJEVOZ / USKLADIŠTENJE
IT	TRASPORTO / STOCCAGGIO	BG	TPAHCПОРТИРАНЕ / СЪХРАНЕНИЕ
NL	TRANSPORT / BEWARING	RO	TRANSPORT / DEPOZITARE
CZ	PŘEPRAVA / ULOŽENÍ	BA	PREVOZ / USKLADIŠTENJE
SK	TRANSPORT / ULOŽENIE

HWW 1000 VF

Diagram of a pump system with tubing and a water tap, no text or symbols present

2 STOP ↓ 0

Diagram of a blue electric motor with rotating arm and piping, no text or symbols present

4 No Fire No Snow

Technische Daten

Hauswasserwerk

HWW 1000 VF

Artikel-Nr. 72520

Domestic water supply unit

HWW 1000 VF

Art. No 72520

Service connection....230V\~50Hz

Motor output P1 1000 W

Max. delivered quantity....3500 l/h

Max. head of delivery 44 m

Max. suction head....8 m

35°C

Max. Water temperature....35°C

Hose connection....1" IG

IPX4

Degree of protection IPX4

Weight....12 kg

Sound power level....88 dB

tank capacity....19

Handle Pumpe connection integrated water filter Suction-Set On-/Off -switch indulgence screw Suction connection

pressure switch boiler pressure gauge valve boiler

Read and understand the operating instructions before using the appliance. Abide by all the safety

measures stated in the service manual. Act responsibly toward third parties.

In case of any doubts about connection and operation refer please to our customer center

Specifi ed Conditions Of Use

The pump is designed for pumping clean water only to supply the home with water and to use it at home, in garden, courtyard and for fi elds. Respecting technical data and safety precautions.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

The pump is not suited for long-run operation (e.g. as a circulation pump in ponds or streams). When used in this manner, its service life is curtailed correspondingly. In these cases, then, use a time switch to secure sufficient idle periods between cycles of operation.
Do not leave the pump unattended while in operation in order to prevent subsequent damages caused by eventual malfunctions. Make sure to disconnect the device from the grid if you do not plan on using it.
Do not use the pump for drinking water!
The pump must not be connected to the existing water-supply network as a pressure-boosting device.
⚠️ Never use the pump as a pool circulation pump.

Safety Instructions

WARNING!

Electric shock! There is a risk of an injury caused by electric shock!

This device is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or without the necessary lack experience or knowledge unless they are supervised by a person who is responsible for their safety or were instructed by that person in how to use the device.

Children should be supervised to ensure that they do not play with the device. Always keep children and unauthorised persons out of reach of the appliance.

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Before putting into operation, a qualified electrician must check whether electric safety measures required are in place. Any national regulations in this regard must be complied with.

Electric connection to a socket.

Do not expose the appliance to rain and do not use it in wet or moisture conditions.

It is necessary to make sure the connecting socket was not near water and humidity and the plug was protected against humidity.

Avoid installing the appliance in wet shafts (risk of short circuit, corrosion eff ects)!

Check the voltage. Technical data given on the type label must correspond with electric network voltage.

Only use splash proof extension cables approved for outdoor purposes.

Do not grab the feeder cable, plunge the pump, lift or carry it while it is connected to the grid!

Check the cable and/or socket for damages before the appliance putting into operation.

To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any circumstances attempt any repair yourself.

Protect the feeder cable from excessive temperatures, oil and sharp edges.

⚠️ If the pump is in operation, neither people nor animals can be present or plunged in the pumped liquid (e.g. pools, cellars, etc.).

⚠ The pump must not in any case run without fi llings.

Do not leave the pump unattended while in operation in order to prevent subsequent damages caused by eventual malfunctions. Make sure to disconnect the device from the grid if you do not plan on using it.

The temperature of the drained liquid must not exceed +35 °C.

When using the pump for domestic water supply, always observe the local regulations of water management authorities and the waste water drainage.

If the pump is used in ponds, wells, etc. and appropriate pumping stations, standards valid for pumps in the given country must unconditionally be observed.

Do not use pump at outside temperatures over 40 °C or under 0 °C

In cold weather, the pumping body motor should not bewrapped in a blanket or another piece of textile with intent to prevent the water freezing.

The user is responsible to third parties if pump (dumping stations, etc.) is used.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualifi cation: Apart from the detailed instructions by a professional, no special qualifi cation is necessary for appliance using.

Minimum age: Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

Emergency procedure

Conduct a fi rst-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a fi rst-aid kit. It is essential to replace any used material in the fi rst-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Maintenance

⚠️ Before carrying out any work on the machine, disconnect the plug from the socket.

Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug.

The machine must not be used under any circumstances if the machine or the safety devices are damaged.

Refer all servicing to customer service. Use only original accessories and original spare parts.

Caution: Standing water may corrode (brownish colour) in the pump according to design.

At winter storing, it is necessary to make sure there is no water in the appliance as the frost could damage the appliance. Prior to transportation, it is necessary to unplug the pump from the grid! The device has to be completely emptied and stored with frost-proof protection. Adhesion of mechanical seals can be prevented if you rinse the pump with appropriate oil (for example, with vegetable oil).

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

Guarantee

Guarantee claims as per guarantee card attached.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee..

GÜDE cannot be held responsible for damages incurred in consequence of unqualified installation or unskilled handling of the pump.

The device has to be checked on a regular basis to ensure perfect functioning.

Let us refer to the fact we do not assume any responsibility – according to standards in force – for damage eventually caused by our appliances in the below-mentioned cases:

• Unprofessional repairs executed by unauthorised service centres;
• Use in conflict with the designed purpose, or failure to observe the use as designed;
• Pump overload with a continuous run;
• Damage as a result of icing or any other fault caused by climatic influences;
  Identical regulations apply for accessory parts.

To prevent damage (such as fl ooded rooms, etc.) as a result of faulty pump operation (failure or fault) the owner (user) is obliged to take reasonable safety measures (alarm assembly, spare pump, etc.).

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:

Serial No.:

Art. No:

Year of production:

Symbols

Read the Operating Instructions

Before carrying out any work on the machine, disconnect the plug from the socket.

Protect against frost

With sotrage protect against wetness

Staying in the transportation medium prohibited

Warning against dangerous electric voltage

Warning against automatic starting

Accessory - Not included in standard equipment, available as an accessory.

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Protect against humidity

This side up

Inspection and maintenance plan

Time interval Description Any other details

As needed Clean the check valve and the prefliter. Check the check valve function.

monthly Check the air pressure in the boiler When electric consumers open correct to

1,5 - 1,8 bar → 8

Failures – causes - removal

Failures Causes Removal

Engine does not start No power supply. Blocked pump wheel		Turn the engine shaft with screwdriver through the fan cover (to release friction circles sealing that may be stuck together).
Pump does not suck Missing, loose or blocked check valve Check valve is not in water. Pump without water Too high suction head. Air bubbles in the suction pipeline. Connections not sealed, pump sucks air, pump is not deaerated. Prefi Iter clogged		Fix or clean the check valve. Immerse the check valve into water. Fill the pump shell with water. Check the suction head. Check the tighten of suction pipeline. Carefully repeat connection according to the chapter „Connection“! Clean the prefi Iter→10
Thermal detector swit-ching the pump off →4	Pump is overheated and switched off by the thermal overloading protection. No electric power supply. Impurity particles (e.g. pebbles) have settled down in the suction hole.	Let the device getting cool! Check power supply. Disassemble and clean the suction hose, prevent from suction of foreign substances.
Insuffi cient amount of water pumped	Too high suction head. Strainer of the check valve dirty clogged pre-fi Iter	Check the suction head. Clean the strainer., Position the check valve lower. Clean the prefi Iter 10→10 Clean the pump and replace worn parts. (qualifi ed workshop)
Reduced switching intervals	Air pressure in the receiver too low Control air pressure.	→11

Hose connection....1" IG

EC-DECLARATION OF CONFORMITY

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives. In case of any change to the appliance not discussed with us the Declaration expires.

DECLARATION CE DE CONFORMITE

PROHLASENI O SHODE EU