DPS - Projection screen Duronic - Free user manual and instructions

Product type	Tabletop projection screen
Brand	Duronic
Model	DPS
Screen material	PVC
Deployment mechanism	Telescopic with lever lock
Base type	90° swivel for table stability
Recommended use	Tabletop installation, indoor use
Key features	Quick setup and storage, height adjustment, integrated lock
Maintenance and cleaning	Clean with a dry cloth or duster; for stubborn stains: damp cloth with mild soap, without excessive pressure
Usage precautions	Do not use abrasive chemicals; store the screen after each use; avoid high temperatures
Warranty	1 year (Shine-Mart Ltd, owner of Duronic)
Manufacturer information	Shine-Mart Ltd, RM3 8SB, United Kingdom
Environmental standards	Compliant with WEEE directive (Waste Electrical and Electronic Equipment)
Included accessories	User manual, protective case

Frequently Asked Questions - DPS Duronic

How to install the Duronic DPS projection screen?

Remove the screen from the packaging, place it on a stable table. Swivel the base 90° from the case. Turn the locking lever to the 'open' position, then lift the screen by pinching the D-rings to the desired height. Then lock the lever.

How to store the screen after use?

Hold the base with one hand, gently push the screen down into the case. Turn the lever to the 'locked' position to secure. Always store the screen in its case to avoid dust and damage.

Can I clean the screen with water?

Yes, for stains, use a damp cloth with mild soap without rubbing too hard. For dust, a dry cloth or duster is enough. Never use abrasive chemicals.

Is the screen suitable for outdoor use?

No, this screen is designed for indoor use only. Avoid high temperatures and humidity.

What is the maximum deployment height?

The exact height is not specified in the manual, but the telescopic mechanism allows gradual adjustment up to an unspecified maximum. Adjust according to your needs.

Is the screen delivered pre-assembled?

Yes, the screen comes pre-assembled. Simply take it out of the box, swivel the base, and deploy.

What to do if the locking lever no longer works?

Make sure to always store the screen after use to prevent lock wear. In case of malfunction, contact Duronic customer service (1-year warranty).

What is the warranty period of the DPS screen?

The warranty is 1 year from the date of purchase, covering manufacturing defects. Keep the proof of purchase.

Can I use the screen with any projector?

Yes, this screen is universal. Ensure to choose an image size suitable for the screen surface (not specified) and place the projector at the correct distance.

How to clean the protective case?

The case can be dusted with a dry cloth. For stains, use a slightly damp cloth. Never use solvents.

USER MANUAL DPS Duronic

Creative Consumer Electronics

DPS - Desktop Projector Screen

PLEASE READ ALL THE INSTRUCTIONS BEFORE USE

duronic.com

duronic

@duronicmedia

Duronic

@duronicmedia

DURONIC

Contents

English Manual 5

• Remove all packaging and set aside.
• Clear a large enough area to assemble the screen. Make sure the area is larger than the sides of the screen.
• Assembly of the screen may require two people for some of the steps.
• Do not assemble the screen in areas of high temperature to avoid incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to assemble the screen.

Assembly Instructions

This projector screen comes fully assembled and can be used straight from the box.

Lift out the projector screen from the box and place aside.

In order to protect the screen from getting marked or stained, ensure that the screen is kept away from dust and dirt.

Decide on a location for your screen. The DPS is a freestanding projector screen which is designed to be placed on a table top.

1. Place the projector screen on the table surface.
2. Rotate the feet 90^ away from the casing.

Operating Instructions

Lifting the Screen

1. Turn the locking lever from the "LOCK" position to the "OPEN" position.
2. With one hand, hold the base and with the other hand pinch together the D-shaped rings and lift the screen upwards to the maximum height.

Lowering the Screen

1. Hold the base steady with one hand, and with the other gently push the screen down into the casing.
2. Turn the locking lever from the "OPEN" position to the "LOCK" position.

Cautions:

• Make sure that the screen is extended from the casing gently.
• Make sure that the screen is retracted back into the casing after each use. Failure to do so may result in damage to the locking catch and can also allow the screen to gather dust.

Close-up of a black electronic device with a lock and power button, showing bidirectional arrows (no text or symbols)

Close-up of hands holding a small metallic knob on a black surface (no text or symbols visible)

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

Cleaning

If the screen gathers dust, simply clean with a dry cloth or duster.

The screen is made of PVC. If the screen has a mark or stain that needs to be removed, use a wet cloth with a mild soap to gently clean the screen. Use minimal pressure to prevent damaging the fabric.

Do not use any abrasive chemicals or cleaning agents on any part of the screen.

DURONIC

Warranty

1 Year Guarantee from Shine-Mart Ltd, Trademark owners of Duronic Products. NOTE: THESE STATEMENTS DO NOT AFFECT YOUR STATUTORY RIGHTS AS A CONSUMER

This product has been manufactured under the strictest or quality control procedures, and using the highest quality of materials, to ensure excellent performance and reliability. It will give very good and long lasting service, provided it is properly used and maintained. The product is guaranteed for 1 years from the date of original purchase. If any defect arises due to a faulty materials or poor workmanship, the faulty product must be returned to the original place of purchase. Refund or replacement is at the discretion of that company.

Duronic Products are offered with a 1 year guarantee under the following conditions:

1. The product must be returned to the retailer with original proof of purchase.
2. The product must be installed and used in accordance with the instructions contained in this operating manual.
3. It must be used only for domestic purposes.
4. It does not cover wear and tear, malicious damage, misuse, neglect, inexpert repairs or consumable parts.
5. Shine-Mart Ltd has no responsibilities for accidental or consequential loss or damage.
6. Shine-Mart Ltd are not liable to carry out any type of servicing work, under the guarantee
7. Valid in the UK only

This product is fitted with CE:1363 plug and fuse Imported by Shine-Mart Ltd, RM3 8SB

Information on waste Disposal for Consumers of

Electrical & Electronic Equipment.

This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste

Electrical & Electronic Equipment, (WEEE).

Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.

For proper treatment, recovery and recycling; please take all WEEE marked

waste to your Local Authority Civic waste site,

where it will be accepted free of charge.

If customers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.

Follow Us

duronic.com

duronic

@duronicmedia

Duronic

@duronicmedia

Close-up of a hand pressing down on a black metal component (no text or symbols visible)

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

Nettoyage

Leinwand schließen

Close-up of a hand pressing down on a black metal component (no text or symbols visible)

Vorsichtsmaßnahmen

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

Reinigung

Cerrar la pantalla

Close-up of hands adjusting a black metal clip on a dark surface (no text or symbols visible)

Advertencias:

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

Limpieza

Close-up of a hand pressing down on a black metal component (no text or symbols visible)

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

Pulizia

Close-up of a hand pressing down on a black metal component (no text or symbols visible)

Simple diagram of a rectangular frame with two opposing arrows indicating vertical and horizontal directions (no text or symbols)

• Remove all packaging and set aside.
• Clear a large enough area to assemble the screen. Make sure the area is larger than the sides of the screen.
• Assembly of the screen may require two people for some of the steps.
• Do not assemble the screen in areas of high temperature to avoid incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to assemble the screen.

Montage-instructies

Close-up of hands holding a small metallic knob on a black surface (no text or symbols visible)

Simple line drawing of a rectangular frame with horizontal and vertical supports, no text or symbols present.

Reiniging