Homak Security HS30120100 - Safe

HS30120100 - Safe Homak Security - Free user manual and instructions

Find the device manual for free HS30120100 Homak Security in PDF.

📄 12 pages English EN 💬 AI Question
Notice Homak Security HS30120100 - page 2
View the manual : Français FR English EN Español ES

User questions about HS30120100 Homak Security

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

L'email reste privé : il sert seulement à vous prévenir si quelqu'un répond à votre question.

No questions yet. Be the first to ask one.

Download the instructions for your Safe in PDF format for free! Find your manual HS30120100 - Homak Security and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HS30120100 by Homak Security.

USER MANUAL HS30120100 Homak Security

THANK YOU FOR PURCHASING FIRST WATCH

BY HOMAK SECURITY. WE APPRECIATE YOUR BUSINESS. Congratulations on your new purchase! Inside your gun cabinet, you will fi nd the following items: A) Keys D) 4 Screws B) Bottom Floor Foam E) 4 Washers C) Plastic Barrel Rest Kit Locate this instruction manual and keep in a safe place after reading thoroughly. The factory key code can be found printed on the back page of this manual. If this code is lost, please call 1-800-874-6625 for assistance.

1. Install the cabinet

Locate the four washers and screws. Place the cabinet in a suitable location aligning the holes on the back of the cabinet with two studs in the wall that are 16” apart. Pre-drill the holes into the studs before permanently installing cabinet. NOTE: This cabinet is not designed to be used without securing it to a wall or other surface. It may tip over. MECHANICAL ASSEMBLY

BARREL REST MOUNTING BAR

The foam part is shown below. The part has been designed to fi t into the bottom of the cabinet. Carefully, remove the paper backing revealing the adhesive backing and place neatly into the bottom of the cabinet. Once the backing has been removed and the foam is attached, it can not be removed without damage. Door Lock Cylindar Mounting Holes- 4 - After the barrel rest mounting bar has been attached during the foam installation instructions, you may slide the barrel rests onto the mount bar in any position. They can be moved at any time.

1. Never leave a loaded fi rearm in this safe. Some types of weapons may discharge

easily, and even though this safe is all metal construction, a bullet may penetrate the steel wall.

2. Check and remove fi rearms contained in this safe before returning it to Homak or

a Retail store. If the safe will not open, a certifi ed locksmith may be able to open this product safely.

3. Always leave safe locked while on display in stores.

4. Not intended for use by children. Do not play on, in or around.

5. This is a heavy unit, lifting may require a fork lift. Trying to lift this product without

1. Never leave a loaded fi rearm in this safe. Some types of weapons may discharge

easily, and even though this safe is all metal construction, a bullet may penetrate the steel wall.

2. Check and remove fi rearms contained in this safe before returning it to Homak or

a Retail store. If the safe will not open, a certifi ed locksmith may be able to open this product safely.

3. Always leave safe locked while on display in stores.

4. Not intended for use by children. Do not play on, in or around.

5. This is a heavy unit, lifting may require a fork lift. Trying to lift this product without

the use of heavy lifting equipment may result in serious injury or death. CONSIGNES DE SÉCURITÉ :

PRODUCT MADE IN CHINA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Homak Security

Model : HS30120100

Category : Safe