Thermup Go - Bottle warmer Lionelo - Free user manual and instructions

USER MANUAL Thermup Go Lionelo

Do not repair or modify this product on your own. Only an authorized service technician is allowed to perform these operaons.

This product is not a toy. Do not let children play with it. Keep the product out of reach of children.

3. The device can be used by children aged at least 3 and persons with

limited physical, sensory or mental capabilies, as well as persons who lack suitable knowledge and experience in using the device as long as EN‑ 5 ‑ EN their acons are supervised or if they have been instructed on safe use of the device and related risks beforehand.

Cleaning and maintenance of the device can be performed by children aged at least 8 and when supervised. Keep this device and power cable out of reach of children below the age of 3.

Keep the product away from sharp edges and sources of heat and moisture. The product must not be exposed to direct sunlight. Do not let the product overheat.

6. Do not immerse the product or power cable in water or other liquids.

Before use, make sure the product is dry.

7. Do not use the USB cable for other purposes than designed.

Do not connect the product to the source of power if there is no bole with liquid. The bole must contain at least 60 ml of liquid.

10. When heated food reaches the desired temperature, take the bole

out of the warmer. Do not heat food up too long.

To make sure milk is warm enough, pour out a few drops on your forearm and assess the temperature. As for solid foods – taste it to make sure it is not too hot.

12. The heang element surface is subject to residual heat aer use.‑ 6 ‑EN

The product complies with requirements of EU direcves. Pursuant to the Direcve 2012/19/EU, this product is subject to selecve collecon. The product must not be disposed of together with domesc waste because it may pose a threat to the environment and human health. The worn-out product must be handed over to the electrics and electronics recycling center. Parts list (g. A)

1. Pour boiled water to the bole, then fasten the Velcro on the sleeve

2. Connect USB cable to the sleeve and power source (charger/ power

Set the desired temperature (38˚C - 50˚C) with the “+/-“ buon (g. D).

• If the indicated icon is displayed (g. E), the device is in the process of heang up.‑ 7 ‑ EN

When the selected temperature is reached, it will appear on the display (g. F). Troubleshoong Problem Soluon The display shows

Return the device for servicing; do not aempt to repair it yourself. The display shows ERROR H1 Turn o the device and turn it back on aer 5 minutes. If necessary, contact customer service. How to clean and maintain

1. Aer every use and before cleaning, unplug the product. Before you

start cleaning, wait for the product to cool down.

2. Clean the sleeve; to do so, wipe it with a wet cloth or paper towel.

Do not clean the sleeve under running water.

3. Do not use strong cleaning agents.