Candy Cotton 90.396Y - Cotton candy machine Beper - Free user manual and instructions
Find the device manual for free Candy Cotton 90.396Y Beper in PDF.
User questions about Candy Cotton 90.396Y Beper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Cotton candy machine in PDF format for free! Find your manual Candy Cotton 90.396Y - Beper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Candy Cotton 90.396Y by Beper.
USER MANUAL Candy Cotton 90.396Y Beper
For further information and/or for instructions for use in other languages, please visit: beper.com
AVVERTENZE GENERALI
LEGGERE QUESTE ISTRUZIONI PRIMA DI USARE L'APPARECCHIO.
GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE APPLIANCE.
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Never pull the supply cord to unplug the appliance.
Make sure that the supply cord never comes into contact with hot or cutting surfaces
Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Only connect this appliance on alternating current
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
This appliance is to be destined to its special purpose only.
Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.
Do not use the appliance near explosives, highly flammable materials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children who could play with the appliance.
USE ADVICE
Make sure that the mains voltage corresponds to the data specified on the label of the cotton candy maker.
Locate the cotton candy maker on a plane and stable surface, away from heat or cold source.
Make sure the bowl is well fixed on the motor of the cotton candy maker before use.
Do not put hands into the bowl while operating.
The rotating reservoir turns quickly and with high temperature; to avoid risks of injuries do never touch with hands, spoons or other.
Do not switch on the cotton candy maker without the rotating reservoir.
Be careful while operating, sugar hits the air.
Leave the cotton candy maker cool down before putting or removing bowl or rotating reservoir.
The temperature of the rotating reservoir is still high for approx. 15 minutes after switch off; do no touch to avoid injuries and burns.
When switch off the cotton candy maker wait until the rotating reservoir completely stops.
Always hold the cotton candy maker by the body unit and never by the bowl to move it.
Not leave the cotton candy maker connected to the socket without supervision.
Do not leave the cord supply connected on the socket if not used, always disconnect the cotton candy maker if not used.
Do not pull on the cord supply to disconnect from the socket.
If the cord is damaged, make it replaced asking to the assistance centre authorized.
Do not immerse the cotton candy maker and the cord into water or other liquids.
Do not leave cotton candy into the bowl when the device is switch off and not used for a long time.
Do not expose the cotton candy maker to damp and do not use it outdoors. Do not put liquids into the cotton candy maker. In case of infiltration, disconnect the plug and make the device repaired by a professional people.
Do never touch the cotton candy maker and the cord with wet hands.
The cotton candy maker is not for playing.
The cotton candy maker has been manufactured for household use only, and not for commercial purpose.
DESCRIPTION
1-Bowl
2 - Rotating reservoir
3 - Heating rods
4 - Body motor
5-Switch on/off (1/0)
6 - Non-slip feet with sucker
7-Cord supply
8 - Measuring cup
INSTRUCTION FOR USE
FIRSTUSE
When used for the first time wash the bowl (1) and rotating reservoir (2) with warm water and wipe all.
Locate the cotton candy make on a stable and horizontal surface.
Insert the bowl (1) on the motor (4).
Insert the rotating reservoir (2).
!ATTENTION!
A bad installation of the rotating reservoir (2) can alter the production of cotton candy or cause excessive vibration.
USE
Connect the cord (7) on the socket and switch on the cotton candy maker using the switch on/off I/O (5). Heat for about 5 minutes (the heating rods (3) lights up).
Switch of the cotton candy maker pressing the switch on/off (5) position 0.
Wait until the rotating reservoir (2) completely stops.
Put the suger inside the rotating reservoir (2) using the measuring cup (8).
!ATTENTION!
Do not put sugar inside the rotating reservoir when the device is operating.
Do not put too much sugar (please refer to the measuring cup, about 10g of sugar), that could cause noise and vibrations. Use white sugar. Do not use other ingredients.
Switch on the cotton candy maker using the switch on/off (5) on position I; the rotating reservoir (2) start turning and heats with the heating rods (3).
!ATTENTION!
The rotating reservoir turns quickly and with high temperature; to avoid risks of injuries do never touch with hands, spoons or other.
After 2-3 minutes sugar turns to cotton candy. Roll cotton candy on a wooden stick (to buy at the supermarket).
Make the wooden stick rolls around the bowl (1).
When complete, switch off the cotton candy maker pressing the switch on/off (5) position 0.
When the cotton candy maker stops, wait until the rotating reservoir (2) completely stops before adding sugar.
!ATTENTION!
The temperature of the rotating reservoir (2) remains hot for some minutes (about 15 minutes) after the device stops.
CLEANING AND CARE
It is recommended to clean the cotton candy maker after every use.
Make sure the cotton candy maker is turned off, the switch on/off (5) is on position 0 and the cord supply (7) disconnected from the socket.
Wait until every parts of the cotton candy maker are completely cool down.
Clean the unit with a soft and damp cloth. Do not immerse the cotton candy maker into water.
Do not spray detergent directly on the cotton candy maker, if necessary, put it directly on a cloth.
TECHNICAL DATA
Power 500W
Power supply 220-240V ~ 50-60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
Guarantee conditions
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Technical assistance
Even after the guarantee period we will always pay attention to repairs for defective appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:
PRECAUTIONS GENERALES
LIRE ATTENTIVEMENT LES INSTRUCTIONS SUIVANTES AVANT LA PREMIÈRE UTILISATION DE L'APPAREIL.
Assistance technique
90.606 Omelette maker
90.388 Popcorn maker
90.372 Oven
90.371 Pizza oven
70.255 Electric ice shaver
beper
BEPERSRL
Via Salieri, 30 37050 - Vallese di Oppeano - Verona Tel. 045/7134674 - Fax 045/9817905
e-mail: assistenza@beper.com beper.com