VE.118 - Fan Beper - Free user manual and instructions

USER MANUAL VE.118 Beper

FIRST USE OF THE APPLIANCE. Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the dome- stic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality. Before connecting the appliance make sure that the mains voltage corresponds to the data specied on the label. If the plug does not suit the socket, let it be replaced with another suitable plug by qualied personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Never pull the supply cord to unplug the appliance. Make sure that the supply cord never comes into contact with hot or cutting surfaces Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid a hazard. Only connect this appliance on alternating current Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.EN Stand Fan Use instructions

Before cleaning, always unplug the appliance. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other uids. Do not hold the appliance with wet hands or feet. Do not hold the appliance with naked feet. Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use the appliance near explosives, highly ammable mate- rials, gases, burning ames, heaters. Do not allow children, disabled people or every people without expe- rience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Make sure that children do not play with this appliance. If you decide not to use the appliance any longer, make it unservice- able by simply cutting the supply cable after disconnecting the plug from the socket.

PLAY WITH THE APPLIANCE. USE INSTRUCTIONS Do not plug the supply cord before assembly every the parts of the fan. Before using, check the integrity of the supply cord and eventually remove possible nodes. Place the fan on a at and stable surface in a dry place. Keep away to a reasonable distance the fan from walls, doors, win- dows or every object that could avoid the appliance to work in the correct way. Do not cover the body or grid of the fan when the appliance is wor- king. Do not plug objects into the grid or inside the appliance. Do not pull on the supply cord to unplug the appliance. After using the fan, unplug the cord supply. If the fan must be stored for a long period or non-used, replace the fan in the original packaging in a dry place. For every next use, check that the fan is clean and that the blades turn in the correct way (motor off).Stand Fan Use instructions

PRODUCT AND ACCESSORIES Fig.A

11. High adjustment nut

2. Insert the telescopic tube on the base and assure with the 4 screws.

3. Loosen and remove the high adjustment nut.

4. Insert the screw-cover plate on telescopic tube than relocate the high adjustment nut.

5. Insert the motor on the telescopic tube and x it with the appropriate screw.

6. Insert the back grid, making sure to match the holes with the pins.

7. Fix the back grid with the appropriate nut.

8. Insert the blades.

9. Fix the blades with the appropriate ring, turning counterclockwise.

10. Fix the front disc to the front grid.

11. Insert the front grid and x it with the appropriate locking hooks and screw.

Important: Firmly weld all components to ensure good stability of the fan, otherwise it could oscillate dangerously. SPEED SELECTION Choose the speed desired pressing on the buttons of the control panels. Position 0 the fan switch off. Position 1 low speed. Position 2 medium speed. Position 3 high speed. HEAD INCLINATION It is possible to choose various positions and change the air ow swing. Before changing it, switch off the fan. Take the motor body and change the inclination of the fan as desired, by snap. Attention : Do not try to force the inclination in order to avoid any failure. SWING It is possible to activate or disconnect the swing of the fan, by touching appropriate button. Swing allow to provide the air uniformly. To activate the swing push the button down until completely blocked ; the head fan turns automatically from right to left. To disconnect the swing raise the button completely. CLEANING Before cleaning, switch off and unplug the fan. For cleaning use a soft cloth, that may be softly wet. Do not use alcohol or chemical substances, or any detergent that could damage this appliance. Do not allow water or other liquids to penetrate in the fan, in order to protect it. After cleaning, dry every parts before using the appliance. During the winter and when not used, keep this appliance in a dry and clean place.EN Stand Fan Use instructions

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap- plies to material and production defects. The purchase receipt and the guarantee certicate must be submitted together in case of claim to guarantee. The guarantee is valid only with a guaranty certicate and proof of purchase (scal receipt) indicating the date of purchase and the model of the appliance For any technical assistance, please contact directly the seller or our head ofce in order to preserve the applian- ce’s efciency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee. GUARANTEE CONDITIONS If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that: - The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee. Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product TECHNICAL ASSISTANCE Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address: CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER. E-MAIL as- [e-mail] WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR. TECHNICAL DATA Power : 40W Power supply. : 220-240V~ 50H For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.Ventilador de pie Manual de instrucciones