Powerbank 8.0 Wireless - Power bank ANSMANN - Free user manual and instructions

USER MANUAL Powerbank 8.0 Wireless ANSMANN

Typ-C: ca. 3h Wireless: ca. 8h

MICRO USB Insert the Micro-USB plug of the USB cable into the Micro-USB socket on the POWERBANK and the USB plug into the USB port on a computer or a USB charger. TYP-C Insert the type-C plug of the USB cable into the type-C socket on the POWERBANK and the USB plug into the USB port on a computer or a USB charger. WIRELESS Place the Powerbank on a Qi or Qi-compatible charger. Ensure that it is correctly positioned. The charge process starts automatically. During the charge process, up to 4 blue LEDs indicate the charge progress. After the charge process is complete, all 4 blue LEDs illuminate steadily. > CHARGING DEVICES The Powerbank has various facilities for charging a device, e.g. a Smartphone.

Use the USB cable supplied (provided that the Micro-USB plug fits your mobile device) or the original charge cable for your device. The Power- bank likewise has a type-C output. Please use a suitable type-C cable for this. Insert the USB plug of the cable into the POWERBANK and the other end into your device. The charge process starts automatically via the type-C connection. Please note that you must press the power button to start the charge process via the USB port. Deutsch | English | Français | Español | Português Italiano | NederlandsWIRELESS Wireless charge output is activated by pressing the power button. This is indicated via the red power LED. Place your Qi-capable device on the Powerbank. The charge LED illuminates in green as soon as the device is charged. The red power LED extinguishes during the energy transfer. While the Powerbank is being wirelessly charged, all outputs are automatically deactivated until all charge connections for charging the Powerbank have been removed. When charging the Powerbank via USB / type C, simultaneous charging of your end-device is possible with restrictions. Please note that the power of the outputs will be reduced here. Simultaneous charging of multiple end-devices is possible with res- trictions. This depends on the total charge current required. Please disconnect your device from the POWERBANK once the charge process is complete. The POWERBANK switches off automatically if it is not charging a device. The POWERBANK may heat up a little depending on the charge/ discharge current. TECHNICAL DATA

1. Cell type: Li-Po rechargeable battery pack

2. Capacity: 8000mAh | 29.6Wh

5. Accessories: Charge cable (USB to Micro-USB)

6. Operating temperature: 0°C to +25°C

7. Charge time: Micro-USB: ca. 4h

Type C: ca. 3h Wireless: ca. 8h

Deutsch | English | Français | Español | Português Italiano | NederlandsENVIRONMENTAL INFORMATION The device should not be discarded in the normal household waste under any circumstances. Dispose of the device via an authorised disposal centre or your municipal waste disposal facility. Observe the current applicable regulations. Contact your waste disposal facility in the event of any doubt. Dispose of all packaging materials via an environmentally friendly disposal facility.

LIMITATION OF LIABILITY

The information contained within these operating instructions can be changed without prior notification. ANSMANN accepts no liability for direct, indirect, incidental or other damage or consequential damage arising though improper handling or through disregard of the informa- tion contained within these operating instructions. GUARANTEE INFORMATION The device has a three-year guarantee. The guarantee does not apply to damage to the device arising through a failure to comply with the operating instructions. Subject to technical changes. We assume no liability for printing errors. 10/2017

Type-C: ca. 3h Wireless: ca. 8h