Modes Trio - Car seat GRACO - Free user manual and instructions

USER MANUAL Modes Trio GRACO

• Freins • Frenos 4-G Removing Front Wheels

UNATTENDED. Always keep child in view while in stroller. AVOID SERIOUS INJURY from falling or sliding out. Always use seat belt or infant car seat harness. After fastening buckles, adjust belts to get a snug fit around your child. AVOID FINGER ENTRAPMENT. Use care when folding or unfolding the stroller. When making adjustments to stroller, ALWAYS ENSURE that all parts of child’s body are clear of any moving parts.

NEVER USE STROLLER ON

STAIRS or escalators. You may suddenly lose control of the stroller or your child may fall out. Also, use extra care when going up or down a step or curb. AVOID STRANGULATION. DO NOT place items with a string around your child’s neck, suspend strings from this product, or attach strings to toys. USE OF THE STROLLER. The product will become unstable with a child weighing more than 50 lb (22.5 kg) or taller than 45 in (114.3 cm). Use stroller with only one child at a time. ALWAYS check that the infant car seat, toddler seat, or infant pramette is securely attached to the frame by pulling up on it. TO PREVENT A HAZARDOUS, UNSTABLE CONDITION, never place purses, shopping bags, parcels or accessory items on the handle (other than approved Graco stroller bags). Never place anything on the canopy. TO PREVENT A HAZARDOUS, UNSTABLE CONDITION, do not place more than 10 lb (4.5 kg) in the storage basket. TO AVOID BURNS, never put hot liquids in the cup holder. TO PREVENT TIPPING, do not place more than 1 lb (0.45 kg) in the cup holder. DO NOT use storage basket as a child carrier. ONLY USE toddler seat/infant pramette on the stroller, and DO NOT use toddler seat/infant pramette in an automobile as car bed or booster seat. DO NOT remove, reverse, or carry the toddler seat/infant pramette while child is in it. DO NOT ALLOW your child to stand on the basket. It may collapse and cause injury. NEVER PLACE child in the toddler seat or infant pramette mode with head toward footrest. DO NOT use stroller frame without toddler seat or car seat attached.

STROLLER to be used as a toy. Failure to follow these warnings and the assembly instructions could result in serious injury or death. Only use product as instructed.5 STROLLER TO BE USED only at walking speed. Product not intended for use while jogging, skating, etc. This product is NOT safe for sleep. NEVER LIFT OR CARRY toddler seat by the footrest.

DISCONTINUE USING YOUR

STROLLER should it become damaged or broken. CAREGIVER MUST always help child get into and out of the stroller. CAREGIVER MUST always ensure the brakes are engaged when placing child into stroller.

CAR SEATS WITH CLICK

CONNECT™. Only use with Graco® infant car seats that have the Click Connect™ logo. Improper use of this stroller with other manufacturers’ car seats may result in serious injury or death. READ THE MANUAL provided with your Graco® car seat before using it with your stroller. FALL HAZARD: Always check that infant car seat is securely attached to stroller by pulling up on the car seat. TO AVOID FALLING OUT always ensure that the toddler seat is securely attached on both sides of the stroller frame. ALWAYS SECURE your child with the car seat harness when using the car seat in the stroller. If your child is already in the car seat, check that the child is secured with the harness. Improper use of this stroller with a car seat may result in serious injury or death. See Graco infant car seat owners manual for maximum size of child. Sticker varies by model6 NEVER ATTACH infant car seat in the toddler seat without the child’s tray and side armrests attached. FALL HAZARD: To prevent falls, do not use this product in the infant pramette mode when the infant begins to push up on hands and knees or weighs over 15 lb (6.8 kg), whichever comes first. ALWAYS release the webbing strap buckle to lower the foot end of the toddler seat before placing child in the infant pramette. DO NOT place anything other than a child inside the infant pramette. REMOVE CHILD when adjusting the seat from or to infant pramette mode.7

STRANGULATION, NE JAMAIS

• Red bag contains hardware, do not discard

1. Pull out to unlock stroller.

2. Lift handle of stroller up.3 Assembly

1. Push rear axle onto the stroller

frame. Brake levers point toward rear of stroller. CHECK that rear axle is securely attached by pulling on brake assembly.

3. CHECK that the stroller is

completely latched open every time you open the stroller and before continuing with the rest of the assembly steps.

2. Locate the red bag and remove its

cotter pins and hardware. Place washer over axle as shown.

1. Attach rear wheels to stroller as

4. Attach hub cap as shown.

CHECK that wheel is securely attached by pulling on wheel. Repeat on other side.

3. Push straight side of pin through

axle hole. Pin will separate around the axle. Curved end of pin MUST face out as shown. Repeat on other end. If you have trouble, use pliers to grab the cotter pin and route it through axle.

1. Attach front wheels to stroller as

2. CHECK that wheels are securely

attached by pulling on wheel assembly.

cup holder. Parent cup holder is dishwasher safe (Top Rack Only).

1. Parent cup holder can be attached

3-F To Open Toddler Seat

1. Unfold toddler seat to the open

2. Align foot end tubes with seat

frame tubes on both sides of seat and assemble as shown. CHECK that button is visible in opening.

arm bar just under the seat mount connectors. MAKE SURE brace is secured in mount by pulling on brace. REPEAT on other side.

webbing is not twisted and end is inserted in pocket.

5. Flip seat over, insert flaps behind

clips on head end of seat, and fasten snaps.

2. Attach child’s tray to as shown.

tray, and rotate child’s tray up.

buttons on bottom of both ends, and lift off.

• ONLY USE toddler seat on the stroller, and do not remove, reverse, or carry the toddler seat while child is in it. See warnings for additional information. ADVERTENCIA

• To Attach Toddler Seat

• To Remove Toddler Seat

1. Squeeze buttons on both sides of

the seat and pull up as shown.

2. CHECK that toddler seat is securely

attached to the stroller by pulling up on toddler seat29 4 Use Utilisation Uso 4-C Canopy

2. CHECK canopy mounts are

attached with button on frame in the mounts as shown.

1. MAKE SURE canopy is always

fastened with the hook and loop tape when used with infant car seat or when toddler seat is in use.

3. Pull forward to open canopy.

4. Push backwards to close canopy.

6. Pull flap forward to open and

3. Use slide adjuster at shoulder and

1. To open, press button on buckle to

release the waist straps.

2. Slide shoulder strap connectors off

3. Remove shoulder straps from

4. Attach waist straps to harness

5. Use slide adjuster at waist for

6. To open, press button on buckle to

release the waist straps.34 4 Use Utilisation Uso

• Adjusting Shoulder Harness position

• Cómo reclinar el asiento WARNING When making adjustments to the stroller seat, make sure child’s head, arms, and legs are clear of moving seat parts and stroller frame.

1. To recline push button down and

pull seat towards the rear.

2. To raise, pull both straps up.36

2. Lift up on both brakes to unlock.

• Frenos WARNING CHECK that brakes are on by trying to push stroller.

1. Push down brake to lock brake.

1. For easy transport or storage, remove front wheel by pushing button as shown.38

4 Use Utilisation Uso 4-H To Use Toddler Seat in Infant Pramette Position • Utilisation du siège pour bambin en position de petit landau pour bébé • Para usar el asiento para niño pequeño en la posición de pramette para bebé WARNING

• Child may slip into leg openings and strangle.

• NEVER use in full recline position unless footrest is in the infant pramette position.

• NEVER use any head support in the reclined infant pramette position.

• ONLY USE infant pramette on the stroller and do not remove, reverse, or carry the infant pramette while child is in it.

• DO NOT adjust with child in seat.

• ALWAYS release the webbing strap buckle to lower the foot end of the toddler seat before placing child in the infant pramette.

• FALL HAZARD: To help prevent falls, do not use this product in infant pramette mode when the infant begins to push up on hands and knees or weighs over 15 lbs (6.8 kg), whichever comes first.

• NEVER PLACE child in the toddler seat or infant pramette mode with head toward footrest. See warnings for additional information.

1. Recline the seat back by pushing

button down, and pull down the seat.

raise toddler seat. Release infant pramette handle to lock in place. DO NOT adjust with child in seat.

3. From the bottom of the seat,

disconnect buckle on the foot end. ALWAYS release the webbing strap buckle to lower the foot end of the toddler seat before placing child in the infant pramette.

4. Push the foot end down.

5. CHECK seat is secured in infant

pramette position as shown.

toddler seat, reverse the steps.

tray and armrest by: A Pressing buttons on bottom of both ends of child’s tray B Lift child’s tray off of armrests. C Press button on inside of armrests D Remove armrest, repeat on other armrest.

pour bébé en siège pour bambin, inverser les étapes.43 4 Use Utilisation Uso For models that do not come with an infant car seat one may be purchased separately. WARNING Use only a GRACO® SnugRide® Click Connect™ car seat with this stroller. This stroller is only compatible with Graco® SnugRide® infant car seats with Click Connect™. Only use with Graco® infant car seats that have the Click Connect™ logo. Improper use of this stroller with other manufacturers’ car seats may result in serious injury or death. Read the manual provided with your Graco car seat before using it with your stroller.

• Always secure your child with the car seat harness when using the car seat in the stroller. If your child is already in the car seat, check that the child is secured with the harness.

Infant Car Seat to Toddler Seat

1. NOTE: Infant car seat can ONLY be

5. Find mounts in toddler seat.

4. CHECK that child’s tray is securely

attached by pulling on child’s tray.

3. Recline the stroller seat back to its

lowest position.46 4 Use Utilisation Uso

6. Insert car seat into stroller and

push down on car seat until the latches snap into the Click Connect™ mounts and the child’s tray.

7. CHECK that infant car seat is

securely attached by pulling up on it.

8. To remove car seat, squeeze release

35 Platinum featuring TrueShield Technology forward-facing. Only install the car seat facing the back of the stroller. 4-J • To Attach Graco

Infant Car Seat to Stroller Frame

1. NOTE: Infant car seat can be inserted

in stroller frame rear or forward facing.

3. Squeeze buttons on both sides of

the seat and pull up as shown.

4. Insert car seat into stroller and push

down on car seat until the latches snap into the Click Connect™ mounts.

5. CHECK that infant car seat is

securely attached by pulling up on it.

6. To remove car seat:

A. Squeeze release handle at back of car seat. B. Lift car seat out of the stroller.50 4 Use Utilisation Uso

1. Levante la reclinación del asiento.

1. Raise seat recline.

2. Before folding, remove car seat if

installed, and lock brakes.

the stroller. 4-K • To Fold Stroller with Toddler Seat

4. To fold the stroller, pull both fold

6. Storage latch will engage and stroller

will rest on the rear wheels and front wheels.

5. Push handle down.

A. Remove infant car seat if in use. B. Remove toddler seat if in use. C. Lock brake.

4-L • To Fold Stroller without Toddler Seat

2. To fold the stroller, pull both fold

3. Push handle down.

4. Storage latch will engage and stroller

will rest on the rear wheels and front wheels.

• DO NOT MACHINE WASH SEAT. It should only be wiped with a mild soap, taking care not to soak the material. NO BLEACH.

• TO CLEAN STROLLER FRAME, use only household soap and warm water. NO BLEACH or detergent.

• TO CLEAN CUP HOLDERS, wash in dishwasher (Top Rack Only).

• FROM TIME TO TIME CHECK YOUR STROLLER for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Graco replacement parts.

• EXCESSIVE EXPOSURE TO SUN OR HEAT could cause fading or warping of parts.

• IF STROLLER BECOMES WET, open canopy and allow to dry thoroughly before storing.

• IF WHEEL SQUEAKS, use a light oil (e.g., WD-40, 3-in-1, or sewing machine oil). It is important to get the oil into the axle and wheel assembly, as illustrated.

• WHEN USING YOUR STROLLER AT THE BEACH, completely clean your stroller afterward to remove sand and salt from mechanisms and wheel assemblies. 5-A • Care & Maintenance