KickScooter GT2P - Scooter SEGWAY - Free user manual and instructions

USER MANUAL KickScooter GT2P SEGWAY

Name Function	Open larnel mode
Power Bulbar	Power on/off	Press the Power button to power on the scooter. Press and hold to power off. Note:Only available when the scooter is unclamped.
	Wake up the hornor	Press the Power Button to wake up the scooter. Wake up the scooter automatically first.
	Elec to the previous speed mode (for GT2 only)	When the scooter is manually oriented PARK mode, press the Power Button to go back to the previous speed mode.
	Confirm Blueout password	Write connecting to the scooter via the Sequence-line beacon, press the Power button to comrmit blueout password.
Left Control Switch	Turn on/off the headlight	Set the Left Control Switch to clockwise/counter clockwise to turn off the headlight.
	Turn off/Off the odometer muster (for GT2 only)	Press the Left Control Switch to turn on the odometer and the scooter will resume its cumulative speed. Press again to turn off.
	Switch between 1WD and 2WD (for GT2 only)	When the slider is all a complete stop, press and ncld the Left Control Switch to switch between 2WD and 2WD.
Right Control Switch	Activate the GPS/CI mode (for GT2 only)	Rotate accelerometer/coulerometer to rotate between speed modes. Mode switching.
	Switch to WALK mode	For GT2 when the scooter is in complete stop, press the Right Control Switch to switch between WALK mode. At this point, press the Right Control Switch开启 the WALK mode. For GT2 When the scooter is not completely stop, press and hold the Right Control Switch to switch between WALK mode. At the point, press and hold the Right Control Switch again to go back to the previous speed mode.
Thrble Front	PROGRESS to speed up
Turn Signal Button	Turn on/off the left/right signal	Press the left/right dial to the Turn Signal button from left/right signalled. Turn off after three clicks. press and hold the right signall to the turn signal. The left/right turn signal will be blinking until it is reversed.
	Turn on the turn signal button	Press the turn button. Open the turn button.

Symbol	Name/Deseription	Meaning
POWER	POWER Progress Bar	The symbol indicates the motor output power of the scodier.
BB	Spearmanizer	The symbol indicates the current speed of the scodier.
SDTC OP	SDTCCP (B12)	The symbol indicates that the SDTC (Seegway Dynamics, Track on Conduy feature is off)	1 With low speed drop, SDTC feature is unable to run RACF mode. Note: this feature helps prevent wheel slipage and transfer stability when accelerating. 2 With one corner drive, SDTC feature is able to run RACF mode.
C	Cruse Mode (C12)	The symbol indicates that the Cruse mode is activated	5 In ECO, SPOH or WIRE mode, press the key to turn Control Switch to turn on the cruse mode when the speed is ≤ 31 mph (50 mph), Once used on the scodier will be able at the current speed. 6 Turn off the cruse mode with the following commands: Method 1: Press the throttle or squeeze brake ever. Method 2: Press the left Control Shift. Method 3: Press the top speed switch. 7 ON/Off turn on the cruse mode, immediately preenormers, head weather or inaccessible road conditions. Serious danger or injury may occur.
L	Lock	When the door locks up, it means the scodier is closed.	When the opener is locked via the Segway Nefexi app: 1) The opener will give data on locations, or the point, press the Power Button to wake up the opener. 2) The opener will sound the alarm with having lights when it is moved for 3 seconds. 3) The opener will stop before when it is moved for 10 seconds, and if the opener is retracted in the last 10 seconds, the booper is stop. When the opener is unlocked it will automatically power all the lights to operation within 10 minutes. Note: Editable/Enable, if necessary via the Segway/Nefexi app.
BWD	WWD/2WD/WDI	This icon will indicate that the scodier is in the one which drives the mode. This icon/PWD indicates that the scodier is in the two wheeled drive mode.
###	Battery Lever (BT2)	The symbol indicates the remaining battery power in后备 percentage and battery tax.
-	Battery Lever (B1)	The symbol indicates the remaining battery power in后备 car.
ROOST	ROOST Progress (RST2)	This symbol indicates the remaining available acceleration time of the BOOST mode.	If Press the Right Control Switch to activate the BOOST mode. In RACF mode only. If Twist the Right Control switch to operate faster. If Press the Right Control Switch in order to get on the speed mode to turn it off. When the BOOST mode is activated, the scodier will associate faster (BOOST) Apply this feature in complete environment. Red weather or undesirable road conditions. Serious danger or injury may occur.
	Bluecolor	The symbol indicates that the scodier is connected to the Seegway/Intact spot.
	Warning	The symbol indicates that the scodier has exceeded an error. The other code will display on the下次 record Seep page for possible causes and solutions.
188mm	Remaining Mileage	The symbol indicates the remaining mileage of the scodier.
	Changing indicator	The symbol indicates that the scodier is changing.

ENIN

Speed Modes Introduction

Mode/mode	ST1 (Speed limit)	ST2 (Buses limit)	Evaluating methods
WALK	37 mph (6 km/h)	37 mph (6 km/h)	1) When the speed is below a certain value, release the High Control Switch. 2) For GT2 pressure the High Control Switch for ST2 pressure and hold the High Control Switch Note: In this mode, hold the control switch down to walk on. If the controller at a low speed.
PARK	0 mph (0 km/h)	0 mph (0 km/h)	1) Drive the High Control Switch. 2) For GT2 when the speed is in ECO SPORT, or 14ACE mode, all buttons will automatically open PARK mode in the following circumstances: Park stop for more than 6 seconds after parking Park stop for more than 20 seconds without locking. * All the park stops press the Power Breaker按钮 so the park stops mode.
ECO	15 mph (25 km/h)	24 mph (40 km/h)	Hold the Right Control Switch
SPORT	15 mph (25 km/h)	24 mph (70 km/h)	Release the Right Control Switch
RACE	15 mph (25 km/h)	24 mph (70 km/h)	Release the Right Control Switch

Damper Adjustment

S(Slow-bound); Increase rebound resistance by rotating the Adjustment Knob clockwise.
F (Festrebound) : Decrease rebound resisance by rotating the Adjustment Knob counternokwise
Note: The damper is set to the default position before leaving the factory. Please follow the steps above to adjust it according to your riding needs.

Specifications

	Rohr 10cmolles
Product	Name	Sagawa Superstarer GTI	Sagawa SuperstarerGT2
	Model	GTT	GDP
	Length×Width×Height	Approx. 58.5 × 26.5 × 61.5 in (485 × 656 × 1304 mm)
	Poloned Length×Width×Height	Approx. 58.5 × 26.5 × 33.5 in (485 × 656 × 662 mm)
	Net Weight	Approx. 47.6 kg (120 lbs)	Approx. 52.6 kg (115 lb)
Water	Max. Typhoid	150 kg (331 lbs)
	Recommended Age	17-60 years old
	Required Height	311" 57" (120 "200 cm)
Machine	Wastebox	4×2 m (144 mm)
	Ground Drainage	5.5 m (140 mm)
	Drive System	IVD (One-shed drive)	PWT (Two transmission)
	Max Speed	Approx. 15.5 mph (28 mph)	Approx. 43.5 mph (75km/h)
	Theoretical Range	Approx. 43 miles (70 mi)	Approx. 95 miles (95 km)
	Typical Surge	N/A	Approx. 37 miles (50 km)
	Max Slope	Approx. 29%	Approx. 30%
	Operating Torrain	Andalucian /parrottin;zhuracka < 15 m/s(3 cm);gape < 15 m (20 m)
	Operating Temperature	105oC/40oC (140oC)
	Storage Temperature	20oC-40oC (7oC-18oC)
	IP Rating	IPX=
	Cluster at Charingry (cogging)	Approx. 10 F	Approx. 10 F
	Duration of Charingry (days)	Approx. 8 F	Approx. 8 F
Battery	Model	NDAT5920A	NDAT5920A
	Nominal Voltage	50.4V =
	Max. Charingry Voltage	58.5 V =
	Nominal Energy	100kW	1512W
	Nominal Capacity	20 Ah	30 Ah
	Charging/Discharge Temperature	0oC to 100oC (100oF)
	Battery Management System	Own-heating, smart cutout, over current, over-charging and over-charging protection
Motor	Motor Type	AF motor hub motor
	Nominal Power	0.5kw, 1000W	1.5kw/2.000W2
	Max Power	15 kW, 1500 W	3.5KW/5.000W2

05

ENIN

	Non-Parsonal
Charger	Maser	Nevi800200
	Inclu Voltage	100-240V
	Max. Output Voltage	58.8 Vrms
	Outsuf Power	0/100, 115 W
	Tmax. Outpu	5/8 W=20A
Timp	Typ.	11 mm Silt sealing rubber lines
	The Pressure	32 psi
	Material	Rubber
Others	Speed Mutter	WAI, Kinna, PARK mode, FCD mode, SPORT mode and FACT mode
	Suppression System	Front and rear spring suspensors
		Front and rear adjustable damper
	Brake System	Front & Rear disk brakes
Bluecoat	* Sequence Bandpass	2.4000-2.4500 GHz
	Max. IF Power	20 mW

[1] Theoretical Range: Lessons while coding with a full battery. 75 kg (155 lbs) total, 35°C (77°F) at the speed of 124 mph (20 km/h) per hour per month.
[2]Iyicalanl:stedwhinrngwithafti battery,1g (gab 135) 2025C(77-2), at the speed of 21.0m/min/10km/h on average;
"Sixte of the aors that allent range hice speed, mumber of alan andisopoe, arnhent emperes are en
[3]. Singe charging rataed impaunt current up to 2 A up when charging with single charger
Dua charging rated input current u to Amps when chargng with two chargrs spcrned by the manfacture.

Common Failures and Solutions

Error code	Possible causes Solution
0	Throttle abnormality	Please contact alternators service or an authorized dealer.
1	Dashboard communication failure
2	Battery communication failure
3	Turn signals abnormality
4	Headlight abnormality
5	Water detection in stem top
6	Over-voltage protection of motor controller
7	Under-voltage protection of battery/motor controller	Please try to charge the scooter.
8	High starter temperature	Please try to apply heat dissipation for the scooter.
9	High battery temperature	Please try to apply heat dissipation for the scooter.
10	Low battery temperature	Please try to warm up the scooter.
11	High front drive wheel temperature	Please try to apply heat dissipation for the front drive wheel.
12	Front-drive wheel stall	Please restart the scooter and try again.
13	Front-drive wheel current sensor error	Please contact sales service or an authorized dealer.
14	Front-drive wheel mirror current	Please restart the scooter and try again.
15	Front-drive wheel motor phase failure	Please contact after sales service or an authorized dealer.
16	High rear drive wheel temperature	Please try to apply heat dissipation for the rear drive wheel.
17	Rear drive wheel stall	Please restart the scooter and try again.
18	Rear-drive wheel current sensor error	Please contact sales service or an authorized dealer.
19	Rear drive wheel over current	Please restart the scooter and try again.
20	Rear-drive wheel motor phase failure	Please contact after sales service or an authorized dealer.
21	Rear motor stall sensor error
22	Front motor hall sensor error

ENEN

Certifications

This report is certified to ANSI/CAN/UL-22/2 by CSA Group.
The battery complies with UN/POT 38.3
The battery complies with ANS1/CAN/U-2271

European Union Compliance Statement

Information on Disposal for Users of Waste Electrical & Electronic Equipment

This symbol on the product or on its packaging indicates that used electrical and electronic products should not be mixed with unseled metal pen waste. For proper treatment, this your responsibility to dispose of your waste equipment, by a ranging to return it to designated collection points.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise be mitigated from inappropriate waste handling.

Pertuals may be applicable for incorrect disposal of this waste, in accordance with your national legislation. P case contact, your local authority or further details of your nearest designated collection point.

Battery recycling information for Users

This symbol means that batteries and accumulator, at their end of life, should not be mixed with unsortar municipal waste. Your participation is an important part of the effort to organize the impact of batteries and accumulator on the environment and on human health. For proper recycling you can return this product or the batteries or accumulator it contains to your supplier price a designated collection point.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation, there are separate collection systems or used outlets and accumulators.

P case, diapote of batteries and accumulators correctly at your local community waste collection/recycling center.

Radio Equipment Directive

Ninobot (Changzou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other event provisions of the框架协议 Directive 20/4/GB/FLU.

Restriction of the use of certain hazardous substances (RoHS) Directive

Ninobol (Changzou) Co. Ltd., hereby declares the whole product including parts (cable, cord, arc, 90 on) meets the requirements of RoHS Directive 2017/65/EU and armament Commission Delegated Directive (EU) 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS risk") or "RoHS 2.0").

Machinery Directive

Ninobut (Changzou) Toch Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of the Machinery Directive 2006/72/CL.

LUTAthorisond Repeoentale:

Soway-Ninobc.LML

Dyramostraat 7, O14 EN Amsterdam, The Netherlands

Ninehot (Changshou) Tech Co., Ltd hereby declares that the product model GTIF, GT2P comply with the essential requirements and other relevant provisions of the Raco Equipment Directive 20.4/63/EC, the machinery of rective 2006e/42/EC and the Pol BS Directive 2012/65/EU and armament Committee on Docugated Directive (EU) 2015/858. The declaration of conformity can be viewed at the following access: http://eu.europa.eu/content/supportInstructions

UK Compliance Statement

Radio Equipment Regulations 2017

Ninibut (Changyou) Coch Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of Roco equipment Regulations 2014.

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

Nimbot (Changzou) Tech Co. Ltd hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of "The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". Regulations 2012.

ENEN

Supply of Machinery (Safety) Regulations 2008

Ninctor (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of The Safety of Supply of Machinery (Safety) Regulations 2008.

UK CA

UK Authorised Representative:

UKCAFepertn

Dept 302,43 Owston Road Carcraft, Doncaster DNE 8DA, United Kingdom

Nimblec (Changchou) Tech Co., Ltd, hereby declares that the product model: G12E, G-24 comply with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017, Supply of Machinery (Safety) Regulations 2008 and the Restriction of the Use of Carbon Hazardous Substances in Electrical and Electronic Equipment Regulations 2017.

The declaration of conformity can be viewed at the following address: www.sfpway.com

Trademark

Seegway, Segway CT, Segway Vineo and the Ricer Design are the trademarks of Segway Inc. Android is the trade mark of Google Inc., App Store is a service mark of Apple Inc. The respective owners reserve the rights of their trade marks and copyright, etc., refer to in this menu.

We have used the tool to include descriptions and instructions for all the functions of the SuperScooter at the time of printing. However, due to constant improvement of product features and changes of design, your SuperScooter may differ slightly from the one shown in this document. Scan the QR Code on the cover of this manual, or visit the Appa App Store (OS) or the Google Play Store (Android) to download and install the Skyway-Ninobot App. Please note that there are multiple Skyway and Ninobot models with different functions, and some of the Lincs mentioned on may not be acceptable to you. The manufacturer reserves the right to change the design and functionality of the SuperScooter product and documentation without prior notice.

2022Nineost(Beijing)TechCo.Ltd. A rights reserved.

(The Sway-Ninbot App can support SuperSocket with built-in Bluetooth)

Scan the QR code to download the Segway-Ninetsoft app.

SEGWAY

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time.

Visit www.sugway.com or check the Sugway-Ninebot app to download the latest user materials. You must install the app, activate your scooter, and obtain the latest updates and safety instructions.

The pictures shown are for illustration purposes only. The actual product may vary

SEGWAY

Manuel duprocet

Massive/ moderate	GTR (single or double)	GTR (double or triple)	Methods of communication
(MARCHES)	6 km/h(15.7 m/s)	6 km/h(15.7 m/s)	1) Locomotion: the passenger can enter a free car, turn round the passenger in commences direction2) For GTR (1) passengers can enter the passenger in commences direction. Four 3-1/2" trains are not permitted to book on the passenger's commandant.
PARK	0 km/h(15 m/s)	0 km/h(9 m/s)	1) Trainee is allowed to enter the commandant at 1/2.2) Four 1/2 passengers can enter mode ECO, S/RTT or I/402, the passenger must be automatically identified, or mode PAR, due to the circumstances of authority.3) For passengers who are unable to pass on 5 minutes apart or an emergency.4) Passes who are unable to pass on 5 minutes apart or 70 seconds are required to move out.5) * & above state, passengers may leave the passenger's commandant for four minutes after returning to the nearest precedent.
ECO	2 km/h(15.5 m/s)	10 km/h(24.9 m/s)	Tourist is allowed to command the train.
SPORT	25 km/h(15.5 m/s)	70 km/h(44.5 m/s)	Tourist is allowed to command the train.
RACE	25 km/h(15.5 m/s)	70 km/h(43.5 m/s)	Tourist is allowed to command the train.

Ajustement de I'amortisseur

Sreondr: nugtusie a tse ine ronl eunan l buon cagcns sieness agues dme mnt. fRebocnip: imuii hriinatue an reonluntir the hort de gaiae da nne meore. remane ertssot are gled on saosit enp daf uent auet der quitter I zine Vilke survees stepes chessous pour jupster anion of vos hibdlos do conlult.

Spécifications

	Elementarsonor
Produkt	Kern	Segway SumbCooler 34T
	Moule	CTLE
	Langmuir-Laguerie + Hauzeur	Environ 145b (66b × 300mV/(2.8 × 25.8× 61.5ps)
	PliK Llouaue + Lapeur + Pateur	Environ 145b × 85b × 860mm (25b × 25d × 35.90p)
	Poisneut	Environ 400kg (1000 tonnes)
Conduite	Poids max.	145kg (683 mm)
	Age monconnéme	14 ± 10 ans
	Pautier couque	145 - 200cm (11" - 16")
Machine	Prépotérém	147 mm (45.7mm)
	Gardasse sol	142 mm (5.5 μ)
	Système ce contôte	1WU (une coumarine)
	Wises max.	Environ 25km/h (25.5 m/m)
	Autonome tissonnage	Environ 70km (45 sumnes)
	Autonomie énergétique	R/W
	Pisteur max.	Environ 95%
	Lancez travauxable	Aschère/chaosamptre palis oblatances < 3cm (1.2 m); espaces + 3 cm (1.2 p)
	Temperatures de conditionnement	(16.41°C) (14 ± 10°F)
	Temperatures de stockage	-20.48°C (-4.81°C)
	Protection	IPX2
	Durée de charge(smpere)	Environ 121
	Durée de change(coude)	Environ 81
Beteiligung	Modèle	N/A (g/dW)
	Leucocorrémail	60,4V =
	Tennismonnagermax	68.3V =
	Energie minimale	100kWh
	Capacité nominale	20 A/s
	Temperatures ambientrescharge	0.5-40°C (2.5-104°F)
	Système de saister de lauterie	Protection surchaue, cou par collat. sainnélé et suivi d'airborne surcharge
Moteur	Type de moteur	Moyen-marseille rechnod anuit
	Pulsaire nominale	0,5 kW, 500 W
	Pulsaire max.	1.6kW 120 W
	Kleiner-Planzer
Changmu	Mitarbeiter	HITWER0600000
	Tensioneräte	100:240V
	Tensiondauerbliege max.	58.8V=
	Pulsance er solde	0.1kW, 115sW
	Haussonnecrorme	57.8V=2.0A
Preu	Typc	Praktikabildner auto aktiverne bis 10ppm
	Pression des prücks	32psi
	Malathin	Gaußschutz
Actres	Messerkladigse	ModellNAIROB, yoda HAIRO, mixte ECO mixte SHOCT et modelBADE
	Systema disssension	Schnimmvorstellungen in amtiere reviziani
	Systeme de l'airage	Ammoniakur relogier zuanti et ambir
	Systeme de l'airage	Fremdklasseur, et l'airdequarature
Bluecoth	- Sonder von Inbetrag (R)	2.4000/2.4000GWh
	Max. Pausenanz SF	20 mW

1. Auto-orient tricloside: test on rulant with one catenin pleoned charged: 75kg (66 lbs), 25^ (77°F), a vaxtosis: movcm no 20, km/ft 42.4mm sur causes.
   m 10000000000000000000000000000000000000000000000
   aertt t a
   [3]Change unique,non and d'entire non inotal jusca/2 parpierces iis la chargees;non schargeur

Suee chngr cang rnd dne f mnnn jus 4 amperes ro n change wccdoe chgeurs sscifie par he abricant

Amsterdam, The Netherlands

Machines in order to use and target application or mobile systems in order

SEGWAY

Anteert, The Netherlands

Ninber (Changchun) Tien Co., Ltd. niniyongcuiwadze, 7e model productus GTT, C12829 ggydng 7 zanamai cymi y magamaii ninyi stasoway poe aiaa hriyirey wspieu rudzden radiosy 2014/53/HF, nyireyew myazovcev 2006/42/wf orat dyrexywot Ral 2011/65/u 2zimai nyireyew degeowas Komijl 2015/663.

Deklaracjegzopdnoe nca zobocyc podnastpogucym adresm; http://en-segway.com/sopcr-instruetio

。

10

ES ES

Marca commercial

© 2022 Ninebot (Beijing) Tech Co. Ltd. To do not encroaches reservedosts.
(××1 application:Seegway-Ninebot is non-commercial on Super-Scooper.com Bluetooth integra)

0

0