Pulsefire Raid - Mouse HYPERX - Free user manual and instructions

USER MANUAL Pulsefire Raid HYPERX

Page 1 of 5 HyperX Pulsefire Raid

Specifications Shape: Ergonomic Sensor: Pixart PMW3389 Resolution: Up to 16,000 DPI DPI presets: 800 / 1600 / 3200 DPI Speed: 450 IPS Acceleration: 50G Buttons: 11 Left / Right buttons switches: Omron Left / Right buttons durability: 20 million clicks Backlight: RGB (16,777,216 colors) Light effects: 2 RGB lighting zones Onboard memory: 1 profile Connection type: USB 2.0 Polling rate: 1000Hz Cable type: Braided Dimensions (L x W x H): 127.8mm x 71.0mm x 41.5mm Cable length: 1.8m Weight (without cable)

: Approximately 95g Weight (with cable): Approximately 125g Software: HyperX NGENUITY

Please see our Support Page for more information regarding the weight.Document No. 480HX-MC005B.A01 HyperX Pulsefire Raid

Installation Connect the USB connector to the computer. Function Keys Function Keys Secondary Feature DPI button Change between DPI presets. Default values are: - 800 DPI (blue). - 1600 DPI (yellow). - 3200 DPI (green).

HyperX NGENUITY Software To customize lighting, DPI, and macro settings, download the HyperX NGENUITY Software here: hyperxgaming.com/ngenuity. Using with Console Connect the USB connector to PS4 or Xbox One to use with console. Factory Reset If you are experiencing any issue with the mouse, you can perform a factory reset. Onboard memory will be cleared, and all settings will revert back to default. Function Keys Secondary Feature

Hold DPI button + mouse wheel button down for 5 seconds Perform a factory reset on the mouse.

Page 1 of 5 HyperX Pulsefire Raid

HyperX Pulsefire Raid

DPI HyperX NGENUITY hyperxgaming.com/ngenuity.

HyperX Pulsefire Raid

D DPI E 5 F 4 G 8 H 7 I 6